From: Wayne Lin <00601wayne@gmail.com>
To: linux-input@vger.kernel.org
Cc: wayne <wayne.lin@quantatw.com>
Subject: [RFC 19/36] [Driver][Qualcomm 1070][BT] Enable Athros BT driver
Date: Mon, 26 Jul 2010 16:30:28 +0800 [thread overview]
Message-ID: <1280133045-25945-19-git-send-email-wayne.lin@quantatw.com> (raw)
In-Reply-To: <1280133045-25945-1-git-send-email-wayne.lin@quantatw.com>
From: wayne <wayne.lin@quantatw.com>
---
arch/arm/configs/qsd8650a-st1_5_defconfig | 17 ++++++++++++-----
1 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/arch/arm/configs/qsd8650a-st1_5_defconfig b/arch/arm/configs/qsd8650a-st1_5_defconfig
index 5c9d1e7..a88f1d9 100644
--- a/arch/arm/configs/qsd8650a-st1_5_defconfig
+++ b/arch/arm/configs/qsd8650a-st1_5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32.9
-# Mon Jun 7 13:35:03 2010
+# Mon Jun 7 13:56:07 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -1719,12 +1719,19 @@ CONFIG_STAGING=y
# Chromeos Supplied Third-Party Device Drivers
#
CONFIG_ATH6K_LEGACY=m
-CONFIG_AR600x_SD31_XXX=y
-# CONFIG_AR600x_WB31_XXX is not set
+# CONFIG_AR600x_SD31_XXX is not set
+CONFIG_AR600x_WB31_XXX=y
# CONFIG_AR600x_SD32_XXX is not set
# CONFIG_AR600x_CUSTOM_XXX is not set
-# CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set
-# CONFIG_ATH6KL_HCI_BRIDGE is not set
+CONFIG_ATH6KL_ENABLE_COEXISTENCE=y
+CONFIG_AR600x_DUAL_ANTENNA=y
+# CONFIG_AR600x_SINGLE_ANTENNA is not set
+# CONFIG_AR600x_BT_QCOM is not set
+# CONFIG_AR600x_BT_CSR is not set
+CONFIG_AR600x_BT_AR3001=y
+CONFIG_ATH6KL_HCI_BRIDGE=y
+CONFIG_ATH6KL_CONFIG_GPIO_BT_RESET=y
+CONFIG_AR600x_BT_RESET_PIN=22
# CONFIG_ATH6KL_CFG80211 is not set
# CONFIG_ATH6KL_HTC_RAW_INTERFACE is not set
# CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER is not set
--
1.7.0.4
next prev parent reply other threads:[~2010-07-26 8:33 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-26 8:30 [RFC 01/36] [Driver][Qualcomm 1070][LCD] Resolve the booting to Chromium issue Wayne Lin
2010-07-26 8:30 ` [RFC 02/36] [Driver][Qualcomm 1070][USB] Register GPIO#109 for USB analog switch configuration Wayne Lin
2010-07-26 8:30 ` [RFC 04/36] [Driver][Qualcomm 1070][EC_KB] Adding new qci keyboard driver Wayne Lin
2010-07-26 8:55 ` Dmitry Torokhov
2010-07-26 11:16 ` Trilok Soni
2010-07-26 8:59 ` Datta, Shubhrajyoti
2010-07-26 8:30 ` [RFC 05/36] [Driver][Qualcomm 1070][TPM] Enable TPM module Wayne Lin
2010-07-26 8:30 ` [RFC 06/36] [Driver][Qualcomm 1070][EC_BRG] EC Bridge driver porting Wayne Lin
2010-07-26 8:30 ` [RFC 07/36] [Driver][Qualcomm 1070][EC_BRG] Enable EC Bridge Wayne Lin
2010-07-26 8:30 ` [RFC 08/36] [Driver][Qualcomm 1070][EC_BAT] EC battery driver porting Wayne Lin
2010-07-26 8:30 ` [RFC 09/36] [Driver][Qualcomm 1070][EC_BAT] Enable EC battery Wayne Lin
2010-07-26 8:30 ` [RFC 11/36] [Driver][Qualcomm 1070][EC_G_SENSOR] Enable EC gravitation sensor Wayne Lin
2010-07-26 8:30 ` [RFC 12/36] [Driver][Qualcomm 1070][EC_C_SENSOR] EC compass sensor driver porting Wayne Lin
2010-07-26 8:30 ` [RFC 13/36] [Driver][Qualcomm 1070][EC_C_SENSOR] Enable EC compass sensor driver Wayne Lin
2010-07-26 8:30 ` [RFC 14/36] [Driver][Qualcomm 1070][CLOCK] Modify the AXI bus speed Wayne Lin
2010-07-26 8:30 ` [RFC 15/36] [Driver][Qualcomm 1070][VERSION] Adding version definition Wayne Lin
2010-07-26 8:30 ` [RFC 17/36] [Driver][Qualcomm 1070][WIFI/BT] Enable Athros WIFI driver Wayne Lin
2010-07-26 8:30 ` [RFC 18/36] [Driver][Qualcomm 1070][WIFI] Turn on the Athros WIFI power Wayne Lin
2010-07-26 8:30 ` Wayne Lin [this message]
2010-07-26 8:30 ` [RFC 20/36] [Driver][Qualcomm 1070][WIFI/BT] Enable MMC1 dummy send read and configure Athros WIFI build-in driver Wayne Lin
2010-07-26 8:30 ` [RFC 21/36] Revert " [Driver][Qualcomm 1070][CLOCK] Modify the AXI bus speed" Wayne Lin
2010-07-26 8:46 ` Dmitry Torokhov
2010-07-26 8:30 ` [RFC 22/36] [Driver][Qualcomm 1070][CLOCK] Modify the AXI bus maximum speed Wayne Lin
2010-07-26 8:30 ` [RFC 23/36] [Driver][Qualcomm 1065][AT_COMMAND]retrieve message Wayne Lin
2010-07-26 8:30 ` [RFC 24/36] [Driver][Qualcomm 1070][CLOCK] Modify the AXI clock for 1.2Ghz Wayne Lin
2010-07-26 8:30 ` [RFC 25/36] [Driver][Qualcomm 1070][EC_BRG] Adding new EC bridge driver Wayne Lin
2010-07-26 8:30 ` [RFC 26/36] [Driver][Qualcomm 1070][EC_BL] New EC backlight driver porting Wayne Lin
2010-07-26 8:30 ` [RFC 27/36] [Driver][Qualcomm 1070][EC_BRG] Enable NuvoTon WPCE775X driver and disable WinBond WPCE775X driver Wayne Lin
2010-07-26 8:30 ` [RFC 28/36] [Driver][Qualcomm 1070][EC_BL] Enable QCI backlight driver Wayne Lin
2010-07-26 8:30 ` [RFC 29/36] [Driver][Qualcomm 1070][EC_BRG] Correct new EC bridge driver Makefile and Kconfig Wayne Lin
2010-07-26 8:30 ` [RFC 30/36] [Driver][Qualcomm 1070][EC_G_SENSOR] Enable EC gravitation sensor Wayne Lin
2010-07-26 8:30 ` [RFC 31/36] [Driver][Qualcomm 1070][VERSION] 0.1.1 Wayne Lin
2010-07-26 8:30 ` [RFC 32/36] [Driver][Qualcomm 1070][MMC] Enable MMC1 HW detection Wayne Lin
2010-07-26 8:30 ` [RFC 33/36] [Driver][Qualcomm 1070][VERSION] 0.1.2 Wayne Lin
2010-07-26 8:30 ` [RFC 34/36] [Driver][Qualcomm 1070][EC_BAT] Adding newer version battery driver Wayne Lin
2010-07-26 8:30 ` [RFC 35/36] [Driver][Qualcomm 1070][EC_BAT] Enable EC battery Wayne Lin
2010-07-26 8:30 ` [RFC 36/36] [Driver][Qualcomm 1070][VERSION] 0.2.0 Wayne Lin
2010-07-26 8:40 ` Premi, Sanjeev
2010-07-26 8:47 ` Premi, Sanjeev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280133045-25945-19-git-send-email-wayne.lin@quantatw.com \
--to=00601wayne@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=wayne.lin@quantatw.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.