All of lore.kernel.org
 help / color / mirror / Atom feed
From: jooaun <jasaw81@gmail.com>
To: dmitry.torokhov@gmail.com
Cc: linux-input@vger.kernel.org, raphaelpereira@gmail.com,
	jooaun <jasaw81@gmail.com>
Subject: [PATCH 2/8] qt2160: configurable key sensitivity
Date: Tue,  9 Nov 2010 13:15:05 +1100	[thread overview]
Message-ID: <1289268911-32322-2-git-send-email-jasaw81@gmail.com> (raw)
In-Reply-To: <1289268911-32322-1-git-send-email-jasaw81@gmail.com>

Add configurable key sensitivity, disable unused keys.
Configurable key sensitivity to compensate for different touch sensor circuits.
Disable unused keys to reduce power consumption.
Signed-off-by: Joo Aun Saw <jasaw81@gmail.com>

Conflicts:

	include/linux/input/qt2160.h
---
 drivers/input/keyboard/qt2160.c |   38 ++++++++++++++++++++++++++++++++++++++
 include/linux/input/qt2160.h    |    2 ++
 2 files changed, 40 insertions(+), 0 deletions(-)

diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c
index 7ec256c..dcd05cd 100755
--- a/drivers/input/keyboard/qt2160.c
+++ b/drivers/input/keyboard/qt2160.c
@@ -43,9 +43,26 @@
 #define QT2160_CMD_SUBVER     7
 #define QT2160_CMD_CALIBRATE  10
 #define QT2160_CMD_RESET      11
+#define QT2160_CMD_BURST_REP  13
+#define QT2160_CMD_NEG_DRIFT  15
+#define QT2160_CMD_POS_DRIFT  16
+#define QT2160_CMD_DI_LIMIT   17
+#define QT2160_CMD_NEG_RECAL  18
+#define QT2160_CMD_DHTA       19
 #define QT2160_CMD_SLIDE_CTRL 20
 #define QT2160_CMD_SLIDE_OPT  21
 #define QT2160_CMD_KEY0_AKS   22
+#define QT2160_CMD_KEY0_NEGT  38
+#define QT2160_CMD_KEY0_BURST 54
+#define QT2160_CMD_GPIO_DRV1  70
+#define QT2160_CMD_GPIO_DRV2  71
+#define QT2160_CMD_GPIO_DIR   73
+#define QT2160_CMD_GPIO_PWM1  74
+#define QT2160_CMD_GPIO_PWM2  75
+#define QT2160_CMD_PWM_LEVEL  76
+#define QT2160_CMD_GPIO_WAKE  77
+#define QT2160_CMD_CC_KEYS1   78
+#define QT2160_CMD_CC_KEYS2   79
 
 #define QT2160_CYCLE_INTERVAL	(2*HZ)
 
@@ -297,6 +314,27 @@ static int __devinit qt2160_configure_device(struct i2c_client *client,
 	}
 
 	for (i = 0; i < QT2160_MAXKEYS; i++) {
+		/* setup burst length and disable unused keys */
+		if (i < pdata->slider_length) {
+			if (pdata->key_burst_length[i])
+				error |= i2c_smbus_write_byte_data(
+						client,
+						QT2160_CMD_KEY0_BURST + i,
+						pdata->key_burst_length[i]);
+		} else {
+			if (pdata->keycodes[i]) {
+				if (pdata->key_burst_length[i])
+					error |= i2c_smbus_write_byte_data(
+						client,
+						QT2160_CMD_KEY0_BURST + i,
+						pdata->key_burst_length[i]);
+			} else {
+				error |= i2c_smbus_write_byte_data(
+						client,
+						QT2160_CMD_KEY0_BURST + i,
+						0);
+			}
+		}
 		/* set AKS */
 		error |= i2c_smbus_write_byte_data(client,
 						   QT2160_CMD_KEY0_AKS + i,
diff --git a/include/linux/input/qt2160.h b/include/linux/input/qt2160.h
index 9d1252e..748c86e 100755
--- a/include/linux/input/qt2160.h
+++ b/include/linux/input/qt2160.h
@@ -15,12 +15,14 @@
  * @key_aks: adjacent key suppression; keys that form a slider must be in the
  *  same aks group; keys in the same aks group will only report 1 active key at
  *  any time; value 0 disables aks group; valid aks groups are 1, 2, 3
+ * @key_burst_length: key sensitivity; 0 use default
  */
 struct qt2160_info {
 	unsigned char slider_length;
 	unsigned int slider_axis;
 	unsigned short keycodes[QT2160_MAXKEYS];
 	unsigned char key_aks[QT2160_MAXKEYS];
+	unsigned char key_burst_length[QT2160_MAXKEYS];
 };
 
 #endif /* __QT2160_H__ */
-- 
1.7.0.4


  reply	other threads:[~2010-11-09  2:15 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-09  2:15 [PATCH 1/8] qt2160: add slider support jooaun
2010-11-09  2:15 ` jooaun [this message]
2010-11-09  2:43   ` [PATCH 2/8] qt2160: configurable key sensitivity jooaun
2010-11-09  2:15 ` [PATCH 3/8] qt2160: add PM support jooaun
2010-11-09  2:15 ` [PATCH 4/8] qt2160: add configurable power mode jooaun
2010-11-09  2:15 ` [PATCH 5/8] qt2160: fix starting of device calibration jooaun
2010-11-09  2:15 ` [PATCH 6/8] qt2160: only read device when Change pin is active jooaun
2010-11-09  2:45   ` jooaun
2010-11-09  2:15 ` [PATCH 7/8] qt2160: optional interrupt flag jooaun
2010-11-09  2:46   ` jooaun
2010-11-09  2:15 ` [PATCH 8/8] qt2160: add hardware reset jooaun
2010-11-09  2:47   ` jooaun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1289268911-32322-2-git-send-email-jasaw81@gmail.com \
    --to=jasaw81@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=raphaelpereira@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.