From: srinath@mistralsolutions.com To: linux-omap@vger.kernel.org Cc: jdk@ti.com, tony@atomide.com, linux-kernel@vger.kernel.org, linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org, khilman@deeprootsystems.com, nm@ti.com, nagendra@mistralsolutions.com, umeshk@mistralsolutions.com, Srinath <srinath@mistralsolutions.com> Subject: [Patch v5] OMAP: AM3517/05: Add craneboard support Date: Tue, 9 Nov 2010 19:43:52 +0530 [thread overview] Message-ID: <1289312032-16574-1-git-send-email-srinath@mistralsolutions.com> (raw) In-Reply-To: <[PATCH] OMAP: AM3517/05: Add craneboard support> From: Srinath <srinath@mistralsolutions.com> Craneboard is a hardware development platform based on the Sitara AM3517 ARM Cortex - A8 microprocessor device. This is a low cost reference design. This patch adds basic board file. Detailed support will follow in subsequent patches. [1] http://www.ti.com/arm [2] http://www.mistralsolutions.com/products/craneboard.php Signed-off-by: Srinath <srinath@mistralsolutions.com> --- arch/arm/mach-omap2/Kconfig | 5 ++ arch/arm/mach-omap2/Makefile | 2 + arch/arm/mach-omap2/board-am3517crane.c | 69 ++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/uncompress.h | 1 + 4 files changed, 77 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/board-am3517crane.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index ab784bf..3688515 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -174,6 +174,11 @@ config MACH_OMAP3517EVM default y select OMAP_PACKAGE_CBB +config MACH_CRANEBOARD + bool "AM3517/05 CRANE board" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CBB + config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b0810b9..d43bd33 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -174,6 +174,8 @@ obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \ obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o +obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o + obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \ hsmmc.o # Platform specific device init code diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c new file mode 100644 index 0000000..13ead33 --- /dev/null +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -0,0 +1,69 @@ +/* + * Support for AM3517/05 Craneboard + * http://www.mistralsolutions.com/products/craneboard.php + * + * Copyright (C) 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com> + * Author: R.Srinath <srinath@mistralsolutions.com> + * + * Based on mach-omap2/board-am3517evm.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/board.h> +#include <plat/common.h> + +#include "mux.h" + +/* Board initialization */ +static struct omap_board_config_kernel am3517_crane_config[] __initdata = { +}; + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + +static void __init am3517_crane_init_irq(void) +{ + omap_board_config = am3517_crane_config; + omap_board_config_size = ARRAY_SIZE(am3517_crane_config); + + omap2_init_common_hw(NULL, NULL); + omap_init_irq(); + omap_gpio_init(); +} + +static void __init am3517_crane_init(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_serial_init(); +} + +MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") + .boot_params = 0x80000100, + .map_io = omap3_map_io, + .reserve = omap_reserve, + .init_irq = am3517_crane_init_irq, + .init_machine = am3517_crane_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 9036e37..229fbf2 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -145,6 +145,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* omap3 based boards using UART3 */ DEBUG_LL_OMAP3(3, cm_t35); DEBUG_LL_OMAP3(3, cm_t3517); + DEBUG_LL_OMAP3(3, craneboard); DEBUG_LL_OMAP3(3, igep0020); DEBUG_LL_OMAP3(3, igep0030); DEBUG_LL_OMAP3(3, nokia_rx51); -- 1.7.1.226.g770c5
WARNING: multiple messages have this Message-ID (diff)
From: srinath@mistralsolutions.com (srinath at mistralsolutions.com) To: linux-arm-kernel@lists.infradead.org Subject: [Patch v5] OMAP: AM3517/05: Add craneboard support Date: Tue, 9 Nov 2010 19:43:52 +0530 [thread overview] Message-ID: <1289312032-16574-1-git-send-email-srinath@mistralsolutions.com> (raw) In-Reply-To: <[PATCH] OMAP: AM3517/05: Add craneboard support> From: Srinath <srinath@mistralsolutions.com> Craneboard is a hardware development platform based on the Sitara AM3517 ARM Cortex - A8 microprocessor device. This is a low cost reference design. This patch adds basic board file. Detailed support will follow in subsequent patches. [1] http://www.ti.com/arm [2] http://www.mistralsolutions.com/products/craneboard.php Signed-off-by: Srinath <srinath@mistralsolutions.com> --- arch/arm/mach-omap2/Kconfig | 5 ++ arch/arm/mach-omap2/Makefile | 2 + arch/arm/mach-omap2/board-am3517crane.c | 69 ++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/uncompress.h | 1 + 4 files changed, 77 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/board-am3517crane.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index ab784bf..3688515 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -174,6 +174,11 @@ config MACH_OMAP3517EVM default y select OMAP_PACKAGE_CBB +config MACH_CRANEBOARD + bool "AM3517/05 CRANE board" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CBB + config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b0810b9..d43bd33 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -174,6 +174,8 @@ obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \ obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o +obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o + obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \ hsmmc.o # Platform specific device init code diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c new file mode 100644 index 0000000..13ead33 --- /dev/null +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -0,0 +1,69 @@ +/* + * Support for AM3517/05 Craneboard + * http://www.mistralsolutions.com/products/craneboard.php + * + * Copyright (C) 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com> + * Author: R.Srinath <srinath@mistralsolutions.com> + * + * Based on mach-omap2/board-am3517evm.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/board.h> +#include <plat/common.h> + +#include "mux.h" + +/* Board initialization */ +static struct omap_board_config_kernel am3517_crane_config[] __initdata = { +}; + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + +static void __init am3517_crane_init_irq(void) +{ + omap_board_config = am3517_crane_config; + omap_board_config_size = ARRAY_SIZE(am3517_crane_config); + + omap2_init_common_hw(NULL, NULL); + omap_init_irq(); + omap_gpio_init(); +} + +static void __init am3517_crane_init(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_serial_init(); +} + +MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") + .boot_params = 0x80000100, + .map_io = omap3_map_io, + .reserve = omap_reserve, + .init_irq = am3517_crane_init_irq, + .init_machine = am3517_crane_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 9036e37..229fbf2 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -145,6 +145,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* omap3 based boards using UART3 */ DEBUG_LL_OMAP3(3, cm_t35); DEBUG_LL_OMAP3(3, cm_t3517); + DEBUG_LL_OMAP3(3, craneboard); DEBUG_LL_OMAP3(3, igep0020); DEBUG_LL_OMAP3(3, igep0030); DEBUG_LL_OMAP3(3, nokia_rx51); -- 1.7.1.226.g770c5
next prev parent reply other threads:[~2010-11-09 14:32 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <[PATCH] OMAP: AM3517/05: Add craneboard support> 2010-10-28 13:29 ` [Patch v3] OMAP: AM3517/05: Add craneboard support srinath 2010-10-28 14:16 ` Premi, Sanjeev 2010-10-29 5:02 ` Srinath R 2010-10-29 7:13 ` [Patch v4] " srinath 2010-10-29 9:32 ` Premi, Sanjeev 2010-11-05 21:54 ` Tony Lindgren 2010-11-09 14:13 ` srinath [this message] 2010-11-09 14:13 ` [Patch v5] " srinath at mistralsolutions.com 2010-11-16 21:19 ` Tony Lindgren 2010-11-16 21:19 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1289312032-16574-1-git-send-email-srinath@mistralsolutions.com \ --to=srinath@mistralsolutions.com \ --cc=jdk@ti.com \ --cc=khilman@deeprootsystems.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=nagendra@mistralsolutions.com \ --cc=nm@ti.com \ --cc=tony@atomide.com \ --cc=umeshk@mistralsolutions.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.