All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthew Garrett <mjg@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: rpurdie@rpsys.net, akpm@linux-foundation.org,
	nouveau@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	intel-gfx@lists.freedesktop.org, linux-acpi@vger.kernel.org,
	lenb@kernel.org, Matthew Garrett <mjg@redhat.com>
Subject: [PATCH 4/5] nouveau: Change the backlight parent device to the connector, not the PCI dev
Date: Fri, 19 Nov 2010 10:53:55 -0500	[thread overview]
Message-ID: <1290182036-30484-4-git-send-email-mjg@redhat.com> (raw)
In-Reply-To: <1290182036-30484-1-git-send-email-mjg@redhat.com>

We may eventually end up with per-connector backlights, especially with
ddcci devices. Make sure that the parent node for the backlight device is
the connector rather than the PCI device.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_backlight.c |   21 ++++++++++++---------
 drivers/gpu/drm/nouveau/nouveau_connector.c |    9 +++++++++
 drivers/gpu/drm/nouveau/nouveau_drv.h       |    4 ++--
 3 files changed, 23 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c
index 9485af3..7e8a448 100644
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -87,10 +87,11 @@ static struct backlight_ops nv50_bl_ops = {
 	.update_status = nv50_set_intensity,
 };
 
-static int nouveau_nv40_backlight_init(struct drm_device *dev)
+static int nouveau_nv40_backlight_init(struct drm_connector *connector)
 {
-	struct backlight_properties props;
+	struct drm_device *dev = connector->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct backlight_properties props;
 	struct backlight_device *bd;
 
 	if (!(nv_rd32(dev, NV40_PMC_BACKLIGHT) & NV40_PMC_BACKLIGHT_MASK))
@@ -99,7 +100,7 @@ static int nouveau_nv40_backlight_init(struct drm_device *dev)
 	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
 	props.max_brightness = 31;
-	bd = backlight_device_register("nv_backlight", &dev->pdev->dev, dev,
+	bd = backlight_device_register("nv_backlight", &connector->kdev, dev,
 				       &nv40_bl_ops, &props);
 	if (IS_ERR(bd))
 		return PTR_ERR(bd);
@@ -111,10 +112,11 @@ static int nouveau_nv40_backlight_init(struct drm_device *dev)
 	return 0;
 }
 
-static int nouveau_nv50_backlight_init(struct drm_device *dev)
+static int nouveau_nv50_backlight_init(struct drm_connector *connector)
 {
-	struct backlight_properties props;
+	struct drm_device *dev = connector->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct backlight_properties props;
 	struct backlight_device *bd;
 
 	if (!nv_rd32(dev, NV50_PDISPLAY_SOR_BACKLIGHT))
@@ -123,7 +125,7 @@ static int nouveau_nv50_backlight_init(struct drm_device *dev)
 	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
 	props.max_brightness = 1025;
-	bd = backlight_device_register("nv_backlight", &dev->pdev->dev, dev,
+	bd = backlight_device_register("nv_backlight", &connector->kdev, dev,
 				       &nv50_bl_ops, &props);
 	if (IS_ERR(bd))
 		return PTR_ERR(bd);
@@ -134,15 +136,16 @@ static int nouveau_nv50_backlight_init(struct drm_device *dev)
 	return 0;
 }
 
-int nouveau_backlight_init(struct drm_device *dev)
+int nouveau_backlight_init(struct drm_connector *connector)
 {
+	struct drm_device *dev = connector->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 
 	switch (dev_priv->card_type) {
 	case NV_40:
-		return nouveau_nv40_backlight_init(dev);
+		return nouveau_nv40_backlight_init(connector);
 	case NV_50:
-		return nouveau_nv50_backlight_init(dev);
+		return nouveau_nv50_backlight_init(connector);
 	default:
 		break;
 	}
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 0871495..914058d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -106,6 +106,10 @@ nouveau_connector_destroy(struct drm_connector *drm_connector)
 	dev = nv_connector->base.dev;
 	NV_DEBUG_KMS(dev, "\n");
 
+	if (drm_connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
+	    drm_connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+		nouveau_backlight_exit(dev);
+
 	kfree(nv_connector->edid);
 	drm_sysfs_connector_remove(drm_connector);
 	drm_connector_cleanup(drm_connector);
@@ -894,6 +898,11 @@ nouveau_connector_create(struct drm_device *dev, int index)
 	nouveau_connector_set_polling(connector);
 
 	drm_sysfs_connector_add(connector);
+
+	if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
+	    connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+		nouveau_backlight_init(connector);
+
 	dcb->drm = connector;
 	return dcb->drm;
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 3a07e58..3c65b77 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -933,10 +933,10 @@ static inline int nouveau_acpi_edid(struct drm_device *dev, struct drm_connector
 
 /* nouveau_backlight.c */
 #ifdef CONFIG_DRM_NOUVEAU_BACKLIGHT
-extern int nouveau_backlight_init(struct drm_device *);
+extern int nouveau_backlight_init(struct drm_connector *);
 extern void nouveau_backlight_exit(struct drm_device *);
 #else
-static inline int nouveau_backlight_init(struct drm_device *dev)
+static inline int nouveau_backlight_init(struct drm_connector *dev)
 {
 	return 0;
 }
-- 
1.7.3.2


  parent reply	other threads:[~2010-11-19 15:55 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-19 15:53 [PATCH 1/5] Backlight: Add backlight type Matthew Garrett
2010-11-19 15:53 ` [PATCH 2/5] i915: Add native backlight control Matthew Garrett
2010-11-19 15:53   ` Matthew Garrett
2010-11-19 15:53 ` [PATCH 3/5] radeon: Expose backlight class device for legacy LVDS encoder Matthew Garrett
2010-11-19 15:53 ` Matthew Garrett [this message]
2010-11-19 15:53 ` [PATCH 5/5] ACPI: Tie ACPI backlight devices to PCI devices if possible Matthew Garrett
2010-11-19 20:05 ` [PATCH 1/5] Backlight: Add backlight type Andrew Morton
2010-11-19 20:05   ` Andrew Morton
2010-11-19 20:25   ` Matthew Garrett
2010-11-19 20:35     ` Andrew Morton
2010-11-22 10:17     ` Richard Purdie
2010-11-22 12:30       ` Matthew Garrett
2010-11-22 13:35         ` Richard Purdie
2010-11-22 13:40           ` Matthew Garrett
2011-01-14 19:24 Matthew Garrett
2011-01-14 19:24 ` [PATCH 4/5] nouveau: Change the backlight parent device to the connector, not the PCI dev Matthew Garrett
2011-01-14 19:30   ` Anca Emanuel
2011-01-14 19:30     ` Anca Emanuel
2011-01-14 20:20     ` Matthew Garrett
2011-01-15  9:49   ` Ben Skeggs

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1290182036-30484-4-git-send-email-mjg@redhat.com \
    --to=mjg@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nouveau@lists.freedesktop.org \
    --cc=rpurdie@rpsys.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.