All of lore.kernel.org
 help / color / mirror / Atom feed
From: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
To: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org,
	spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
	lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org,
	broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org,
	rpurdie@rpsys
Cc: dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org,
	Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>,
	akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org,
	alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org
Subject: [PATCH v7 11/12] davinci: add tnetv107x evm backlight device
Date: Tue,  7 Dec 2010 09:52:01 -0500	[thread overview]
Message-ID: <1291733522-3626-12-git-send-email-cyril@ti.com> (raw)
In-Reply-To: <1291733522-3626-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org>

The tnetv107x evm board has a backlight device that is connected on one of the
SSP ports.  This patch adds the board definitions necessary to plug the
backlight driver to the GPIO corresponding to this SSP pin.

Signed-off-by: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
---
 arch/arm/mach-davinci/board-tnetv107x-evm.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index e3863dd..ac62de2 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -44,6 +44,7 @@
 #define EVM_MMC_WP_GPIO		21
 #define EVM_MMC_CD_GPIO		24
 #define EVM_SPI_CS_GPIO		54
+#define EVM_BACKLIGHT_GPIO	(SSP_GPIO_START + 2)
 
 static int initialize_gpio(int gpio, char *desc)
 {
@@ -353,6 +354,12 @@ static struct spi_board_info spi_info[] __initconst = {
 	},
 };
 
+static struct platform_device backlight_device = {
+	.name		= "tps6116x",
+	.id		= -1,
+	.dev.platform_data = (void *)EVM_BACKLIGHT_GPIO,
+};
+
 static __init void tnetv107x_evm_board_init(void)
 {
 	davinci_cfg_reg_list(sdio1_pins);
@@ -364,6 +371,13 @@ static __init void tnetv107x_evm_board_init(void)
 	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
 }
 
+static int __init tnetv107x_evm_late_init(void)
+{
+	platform_device_register(&backlight_device);
+	return 0;
+}
+late_initcall(tnetv107x_evm_late_init);
+
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 static int __init tnetv107x_evm_console_init(void)
 {
-- 
1.7.1


------------------------------------------------------------------------------
What happens now with your Lotus Notes apps - do you make another costly 
upgrade, or settle for being marooned without product support? Time to move
off Lotus Notes and onto the cloud with Force.com, apps are easier to build,
use, and manage than apps on traditional platforms. Sign up for the Lotus 
Notes Migration Kit to learn more. http://p.sf.net/sfu/salesforce-d2d

WARNING: multiple messages have this Message-ID (diff)
From: cyril@ti.com (Cyril Chemparathy)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 11/12] davinci: add tnetv107x evm backlight device
Date: Tue,  7 Dec 2010 09:52:01 -0500	[thread overview]
Message-ID: <1291733522-3626-12-git-send-email-cyril@ti.com> (raw)
In-Reply-To: <1291733522-3626-1-git-send-email-cyril@ti.com>

The tnetv107x evm board has a backlight device that is connected on one of the
SSP ports.  This patch adds the board definitions necessary to plug the
backlight driver to the GPIO corresponding to this SSP pin.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
---
 arch/arm/mach-davinci/board-tnetv107x-evm.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index e3863dd..ac62de2 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -44,6 +44,7 @@
 #define EVM_MMC_WP_GPIO		21
 #define EVM_MMC_CD_GPIO		24
 #define EVM_SPI_CS_GPIO		54
+#define EVM_BACKLIGHT_GPIO	(SSP_GPIO_START + 2)
 
 static int initialize_gpio(int gpio, char *desc)
 {
@@ -353,6 +354,12 @@ static struct spi_board_info spi_info[] __initconst = {
 	},
 };
 
+static struct platform_device backlight_device = {
+	.name		= "tps6116x",
+	.id		= -1,
+	.dev.platform_data = (void *)EVM_BACKLIGHT_GPIO,
+};
+
 static __init void tnetv107x_evm_board_init(void)
 {
 	davinci_cfg_reg_list(sdio1_pins);
@@ -364,6 +371,13 @@ static __init void tnetv107x_evm_board_init(void)
 	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
 }
 
+static int __init tnetv107x_evm_late_init(void)
+{
+	platform_device_register(&backlight_device);
+	return 0;
+}
+late_initcall(tnetv107x_evm_late_init);
+
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 static int __init tnetv107x_evm_console_init(void)
 {
-- 
1.7.1

  parent reply	other threads:[~2010-12-07 14:52 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-07 14:51 [PATCH v7 00/12] tnetv107x ssp drivers Cyril Chemparathy
2010-12-07 14:51 ` Cyril Chemparathy
     [not found] ` <1291733522-3626-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-12-07 14:51   ` [PATCH v7 01/12] misc: add driver for sequencer serial port Cyril Chemparathy
2010-12-07 14:51     ` Cyril Chemparathy
     [not found]     ` <1291733522-3626-2-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-12-11  0:13       ` Kevin Hilman
2010-12-11  0:13         ` Kevin Hilman
2010-12-07 14:51   ` [PATCH v7 02/12] davinci: add tnetv107x ssp platform device Cyril Chemparathy
2010-12-07 14:51     ` Cyril Chemparathy
2010-12-07 14:51   ` [PATCH v7 03/12] davinci: add ssp config for tnetv107x evm board Cyril Chemparathy
2010-12-07 14:51     ` Cyril Chemparathy
2010-12-07 14:51   ` [PATCH v7 04/12] spi: add ti-ssp spi master driver Cyril Chemparathy
2010-12-07 14:51     ` Cyril Chemparathy
     [not found]     ` <1291733522-3626-5-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-12-31  6:26       ` Grant Likely
2010-12-31  6:26         ` Grant Likely
2010-12-07 14:51   ` [PATCH v7 05/12] davinci: add spi devices on tnetv107x evm Cyril Chemparathy
2010-12-07 14:51     ` Cyril Chemparathy
2010-12-07 14:51   ` [PATCH v7 06/12] regulator: add driver for tps6524x regulator Cyril Chemparathy
2010-12-07 14:51     ` Cyril Chemparathy
     [not found]     ` <1291733522-3626-7-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-12-07 15:22       ` Mark Brown
2010-12-07 15:22         ` Mark Brown
     [not found]         ` <20101207152222.GD9689-HF5t3jzXg/6ND3a5+9QAFujbO/Zr0HzV@public.gmane.org>
2010-12-07 16:46           ` Cyril Chemparathy
2010-12-07 16:46             ` Cyril Chemparathy
2010-12-07 14:51   ` [PATCH v7 07/12] davinci: add tnetv107x evm regulators Cyril Chemparathy
2010-12-07 14:51     ` Cyril Chemparathy
2010-12-07 14:51   ` [PATCH v7 08/12] gpio: add ti-ssp gpio driver Cyril Chemparathy
2010-12-07 14:51     ` Cyril Chemparathy
     [not found]     ` <1291733522-3626-9-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-12-31  6:16       ` Grant Likely
2010-12-31  6:16         ` Grant Likely
2010-12-07 14:51   ` [PATCH v7 09/12] davinci: add tnetv107x evm ti-ssp gpio device Cyril Chemparathy
2010-12-07 14:51     ` Cyril Chemparathy
2010-12-07 14:52   ` [PATCH v7 10/12] backlight: add support for tps6116x controller Cyril Chemparathy
2010-12-07 14:52     ` Cyril Chemparathy
2010-12-07 14:52   ` Cyril Chemparathy [this message]
2010-12-07 14:52     ` [PATCH v7 11/12] davinci: add tnetv107x evm backlight device Cyril Chemparathy
     [not found]     ` <1291733522-3626-12-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-12-09  8:55       ` Nori, Sekhar
2010-12-09  8:55     ` Nori, Sekhar
2010-12-09 11:00       ` Nori, Sekhar
     [not found]         ` <B85A65D85D7EB246BE421B3FB0FBB5930247CD84F4-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-12-09 14:58           ` Cyril Chemparathy
2010-12-09 14:58             ` Cyril Chemparathy
     [not found]             ` <4D00EEA1.8070201-l0cyMroinI0@public.gmane.org>
2010-12-10 16:01               ` Nori, Sekhar
2010-12-10 16:01                 ` Nori, Sekhar
     [not found]                 ` <B85A65D85D7EB246BE421B3FB0FBB5930247CD8CE8-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-12-10 16:56                   ` Kevin Hilman
2010-12-10 16:56                     ` Kevin Hilman
     [not found]       ` <B85A65D85D7EB246BE421B3FB0FBB5930247CD83E1-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-12-09 11:00         ` Nori, Sekhar
2010-12-07 14:52   ` [PATCH v7 12/12] davinci: add tnetv107x evm i2c eeprom device Cyril Chemparathy
2010-12-07 14:52     ` Cyril Chemparathy
2010-12-11  0:19 ` [PATCH v7 00/12] tnetv107x ssp drivers Kevin Hilman
2010-12-11  0:19   ` Kevin Hilman
     [not found]   ` <87r5dp6tzv.fsf-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-12-11 12:42     ` Mark Brown
2010-12-11 12:42       ` Mark Brown
     [not found]       ` <20101211124242.GE9380-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2010-12-30 21:05         ` Grant Likely
2010-12-30 21:05           ` Grant Likely

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1291733522-3626-12-git-send-email-cyril@ti.com \
    --to=cyril-l0cymroini0@public.gmane.org \
    --cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
    --cc=alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org \
    --cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
    --cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
    --cc=dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    --cc=khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org \
    --cc=lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \
    --cc=rpurdie@rpsys \
    --cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.