All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH] drm/i915: make DP training try a little harder
Date: Wed,  5 Jan 2011 14:45:24 -0800	[thread overview]
Message-ID: <1294267524-24062-1-git-send-email-jbarnes@virtuousgeek.org> (raw)

When trying to do channel equalization, we need to make sure we still
have clock recovery on all lanes while training.  We also need to try
clock recovery again if we lose the clock or if channel eq fails 5
times.  We'll try clock recovery up to 5 more times before giving up
entirely.

Gets suspend/resume working on my Vaio again and brings us back into
compliance with the DP training sequence spec.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_dp.c |   27 +++++++++++++++++++++++----
 1 files changed, 23 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1dc6040..c768e30 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1334,17 +1334,24 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dp->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	bool channel_eq = false;
-	int tries;
+	int tries, cr_tries;
 	u32 reg;
 	uint32_t DP = intel_dp->DP;
 
 	/* channel equalization */
 	tries = 0;
+	cr_tries = 0;
 	channel_eq = false;
 	for (;;) {
 		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
 		uint32_t    signal_levels;
 
+		if (cr_tries > 5) {
+			DRM_ERROR("failed to train DP, aborting\n");
+			intel_dp_link_down(intel_dp);
+			break;
+		}
+
 		if (IS_GEN6(dev) && is_edp(intel_dp)) {
 			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
@@ -1367,14 +1374,26 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 		if (!intel_dp_get_link_status(intel_dp))
 			break;
 
+		/* Make sure clock is still ok */
+		if (!intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+			intel_dp_start_link_train(intel_dp);
+			cr_tries++;
+			continue;
+		}
+
 		if (intel_channel_eq_ok(intel_dp)) {
 			channel_eq = true;
 			break;
 		}
 
-		/* Try 5 times */
-		if (tries > 5)
-			break;
+		/* Try 5 times, then try clock recovery if that fails */
+		if (tries > 5) {
+			intel_dp_link_down(intel_dp);
+			intel_dp_start_link_train(intel_dp);
+			tries = 0;
+			cr_tries++;
+			continue;
+		}
 
 		/* Compute new intel_dp->train_set as requested by target */
 		intel_get_adjust_train(intel_dp);
-- 
1.7.0.4

             reply	other threads:[~2011-01-05 22:45 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-05 22:45 Jesse Barnes [this message]
2011-01-06  1:56 ` [PATCH] drm/i915: make DP training try a little harder Yuanhan Liu
2011-01-06 12:18 ` Chris Wilson
  -- strict thread matches above, loose matches on Subject: below --
2011-01-04 19:53 Jesse Barnes
2011-01-05  7:52 ` Yuanhan Liu
2011-01-05 17:19   ` Jesse Barnes
2011-01-06  0:42     ` Yuanhan Liu
2011-01-05 10:43 ` Chris Wilson
2011-01-05 16:40   ` Jesse Barnes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1294267524-24062-1-git-send-email-jbarnes@virtuousgeek.org \
    --to=jbarnes@virtuousgeek.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.