From: Tomi Valkeinen <tomi.valkeinen@ti.com> To: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Subject: [PATCH 11/19] OMAP: DSS2: DSI: add parameter to enter ulps on disable Date: Tue, 19 Apr 2011 09:22:14 +0000 [thread overview] Message-ID: <1303204942-25450-12-git-send-email-tomi.valkeinen@ti.com> (raw) In-Reply-To: <1303204942-25450-1-git-send-email-tomi.valkeinen@ti.com> Add parameter to omapdss_dsi_display_disable() which the panel driver can use to tell if the DSI lanes should be put to ULPS before disabling the interface. This can be used to skip ULPS entry in cases where the panel doesn't care about ULPS state, for example when the panel will be reset, or when the display interface will be enabled again right after the disable. This will speed up the operation considerably in cases where entering ULPS would fail with timeout, and the panel driver isn't even interested in entering ULPS. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- arch/arm/plat-omap/include/plat/display.h | 2 +- drivers/video/omap2/displays/panel-taal.c | 4 ++-- drivers/video/omap2/dss/dsi.c | 8 ++++---- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h index 205c6de..a65479c 100644 --- a/arch/arm/plat-omap/include/plat/display.h +++ b/arch/arm/plat-omap/include/plat/display.h @@ -592,7 +592,7 @@ void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel); int omapdss_dsi_display_enable(struct omap_dss_device *dssdev); void omapdss_dsi_display_disable(struct omap_dss_device *dssdev, - bool disconnect_lanes); + bool disconnect_lanes, bool enter_ulps); int omapdss_dpi_display_enable(struct omap_dss_device *dssdev); void omapdss_dpi_display_disable(struct omap_dss_device *dssdev); diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c index 74ce9f8..d68119e 100644 --- a/drivers/video/omap2/displays/panel-taal.c +++ b/drivers/video/omap2/displays/panel-taal.c @@ -932,7 +932,7 @@ err: taal_hw_reset(dssdev); - omapdss_dsi_display_disable(dssdev, true); + omapdss_dsi_display_disable(dssdev, true, false); err0: return r; } @@ -955,7 +955,7 @@ static void taal_power_off(struct omap_dss_device *dssdev) taal_hw_reset(dssdev); } - omapdss_dsi_display_disable(dssdev, true); + omapdss_dsi_display_disable(dssdev, true, false); td->enabled = 0; } diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 8d85635..d15014e 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -3763,9 +3763,9 @@ err0: } static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev, - bool disconnect_lanes) + bool disconnect_lanes, bool enter_ulps) { - if (!dsi.ulps_enabled) + if (enter_ulps && !dsi.ulps_enabled) dsi_enter_ulps(); /* disable interface */ @@ -3848,7 +3848,7 @@ err0: EXPORT_SYMBOL(omapdss_dsi_display_enable); void omapdss_dsi_display_disable(struct omap_dss_device *dssdev, - bool disconnect_lanes) + bool disconnect_lanes, bool enter_ulps) { DSSDBG("dsi_display_disable\n"); @@ -3858,7 +3858,7 @@ void omapdss_dsi_display_disable(struct omap_dss_device *dssdev, dsi_display_uninit_dispc(dssdev); - dsi_display_uninit_dsi(dssdev, disconnect_lanes); + dsi_display_uninit_dsi(dssdev, disconnect_lanes, enter_ulps); enable_clocks(0); dsi_enable_pll_clock(0); -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: Tomi Valkeinen <tomi.valkeinen@ti.com> To: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Subject: [PATCH 11/19] OMAP: DSS2: DSI: add parameter to enter ulps on disable Date: Tue, 19 Apr 2011 12:22:14 +0300 [thread overview] Message-ID: <1303204942-25450-12-git-send-email-tomi.valkeinen@ti.com> (raw) In-Reply-To: <1303204942-25450-1-git-send-email-tomi.valkeinen@ti.com> Add parameter to omapdss_dsi_display_disable() which the panel driver can use to tell if the DSI lanes should be put to ULPS before disabling the interface. This can be used to skip ULPS entry in cases where the panel doesn't care about ULPS state, for example when the panel will be reset, or when the display interface will be enabled again right after the disable. This will speed up the operation considerably in cases where entering ULPS would fail with timeout, and the panel driver isn't even interested in entering ULPS. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- arch/arm/plat-omap/include/plat/display.h | 2 +- drivers/video/omap2/displays/panel-taal.c | 4 ++-- drivers/video/omap2/dss/dsi.c | 8 ++++---- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h index 205c6de..a65479c 100644 --- a/arch/arm/plat-omap/include/plat/display.h +++ b/arch/arm/plat-omap/include/plat/display.h @@ -592,7 +592,7 @@ void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel); int omapdss_dsi_display_enable(struct omap_dss_device *dssdev); void omapdss_dsi_display_disable(struct omap_dss_device *dssdev, - bool disconnect_lanes); + bool disconnect_lanes, bool enter_ulps); int omapdss_dpi_display_enable(struct omap_dss_device *dssdev); void omapdss_dpi_display_disable(struct omap_dss_device *dssdev); diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c index 74ce9f8..d68119e 100644 --- a/drivers/video/omap2/displays/panel-taal.c +++ b/drivers/video/omap2/displays/panel-taal.c @@ -932,7 +932,7 @@ err: taal_hw_reset(dssdev); - omapdss_dsi_display_disable(dssdev, true); + omapdss_dsi_display_disable(dssdev, true, false); err0: return r; } @@ -955,7 +955,7 @@ static void taal_power_off(struct omap_dss_device *dssdev) taal_hw_reset(dssdev); } - omapdss_dsi_display_disable(dssdev, true); + omapdss_dsi_display_disable(dssdev, true, false); td->enabled = 0; } diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 8d85635..d15014e 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -3763,9 +3763,9 @@ err0: } static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev, - bool disconnect_lanes) + bool disconnect_lanes, bool enter_ulps) { - if (!dsi.ulps_enabled) + if (enter_ulps && !dsi.ulps_enabled) dsi_enter_ulps(); /* disable interface */ @@ -3848,7 +3848,7 @@ err0: EXPORT_SYMBOL(omapdss_dsi_display_enable); void omapdss_dsi_display_disable(struct omap_dss_device *dssdev, - bool disconnect_lanes) + bool disconnect_lanes, bool enter_ulps) { DSSDBG("dsi_display_disable\n"); @@ -3858,7 +3858,7 @@ void omapdss_dsi_display_disable(struct omap_dss_device *dssdev, dsi_display_uninit_dispc(dssdev); - dsi_display_uninit_dsi(dssdev, disconnect_lanes); + dsi_display_uninit_dsi(dssdev, disconnect_lanes, enter_ulps); enable_clocks(0); dsi_enable_pll_clock(0); -- 1.7.1
next prev parent reply other threads:[~2011-04-19 9:22 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-04-19 9:22 [PATCH 00/19] OMAP: DSS2: ULPS support Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 01/19] OMAP: DSS2: DSI: Add lane override functions Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 02/19] OMAP: DSS2: DSI: Remove CIO LDO status check Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 03/19] OMAP: DSS2: DSI: implement ULPS enter and exit Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 04/19] OMAP: DSS2: DSI: add option to leave DSI lanes powered on Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 05/19] OMAP: DSS2: DSI: rename complexio related functions Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 06/19] OMAP: DSS2: Add FEAT_DSI_REVERSE_TXCLKESC Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 07/19] OMAP: DSS2: DSI: fix _dsi_print_reset_status Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 08/19] OMAP: DSS2: DSI: implement enable/disable SCP clk Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 09/19] OMAP: DSS2: DSI: fix CIO init and uninit Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 10/19] OMAP: DSS2: DSI: wait for TXCLKESC domain to come out of reset Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen [this message] 2011-04-19 9:22 ` [PATCH 11/19] OMAP: DSS2: DSI: add parameter to enter ulps on disable Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 12/19] OMAP: DSS2: DSI: Add DSI pad muxing support Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 13/19] OMAP: DSS2: DSI: ensure VDDS_DSI is disabled on exit Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 14/19] OMAP: DSS2: Taal: Implement configurable ESD interval Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 15/19] OMAP: DSS2: Taal: Clean up ESD queueing Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 16/19] OMAP: DSS2: Taal: Add sysfs file for ESD interval Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 17/19] OMAP: DSS2: Taal: Separate panel reset Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 18/19] OMAP: DSS2: Taal: Rename esd_wq to workqueue Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-19 9:22 ` [PATCH 19/19] OMAP: DSS2: Taal: Implement ULPS functionality Tomi Valkeinen 2011-04-19 9:22 ` Tomi Valkeinen 2011-04-20 5:43 ` [PATCH 00/19] OMAP: DSS2: ULPS support Archit Taneja 2011-04-20 5:55 ` Archit Taneja 2011-04-20 6:08 ` Tomi Valkeinen 2011-04-20 6:08 ` Tomi Valkeinen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1303204942-25450-12-git-send-email-tomi.valkeinen@ti.com \ --to=tomi.valkeinen@ti.com \ --cc=linux-fbdev@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.