All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mayuresh Janorkar <mayur@ti.com>
To: linux-omap@vger.kernel.org
Cc: tomi.valkeinen@ti.com, Mythri P K <mythripk@ti.com>,
	Mayuresh Janorkar <mayur@ti.com>
Subject: [PATCH v2 3/7] OMAP: DSS: Adding a picodlp panel driver
Date: Mon,  2 May 2011 20:22:47 +0530	[thread overview]
Message-ID: <1304347971-1504-4-git-send-email-mayur@ti.com> (raw)
In-Reply-To: <1304347971-1504-1-git-send-email-mayur@ti.com>

From: Mythri P K <mythripk@ti.com>

A projector panel named picodlp is supported by OMAP.
panel driver is required to be added with the name picodlp_panel.

It is a WVGA panel with resolution 864 X 480 and panel timing data
is defined in the panel driver.

picodlp makes use of parallel (DPI) interface multiplexed with secondary lcd
in case of OMAP4.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Mayuresh Janorkar <mayur@ti.com>
---
Changes since v1:
	1. Removed msleep
	
 drivers/video/omap2/displays/panel-picodlp.c |  226 ++++++++++++++++++++++++++
 1 files changed, 226 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/omap2/displays/panel-picodlp.c

diff --git a/drivers/video/omap2/displays/panel-picodlp.c b/drivers/video/omap2/displays/panel-picodlp.c
new file mode 100644
index 0000000..e83e399
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-picodlp.c
@@ -0,0 +1,226 @@
+/*
+ * picodlp panel driver
+ *
+ * Copyright (C) 2009-2011 Texas Instruments
+ * Author: Mythri P K <mythripk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#include <plat/display.h>
+#include <plat/panel-picodlp.h>
+
+struct picodlp_data {
+	struct mutex lock;
+};
+
+static struct omap_video_timings pico_ls_timings = {
+	.x_res		= 864,
+	.y_res		= 480,
+	.hsw		= 7,
+	.hfp		= 11,
+	.hbp		= 7,
+
+	.pixel_clock	= 19200,
+
+	.vsw		= 2,
+	.vfp		= 3,
+	.vbp		= 14,
+};
+
+static int picodlp_panel_power_on(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			return r;
+	}
+
+	r = omapdss_dpi_display_enable(dssdev);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to enable DPI\n");
+		goto err;
+	}
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+
+err:
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	return r;
+}
+
+static void picodlp_panel_power_off(struct omap_dss_device *dssdev)
+{
+	omapdss_dpi_display_disable(dssdev);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+}
+
+static int picodlp_panel_probe(struct omap_dss_device *dssdev)
+{
+	struct picodlp_data *picod;
+
+	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_ONOFF |
+				OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IVS;
+	dssdev->panel.acb = 0x0;
+	dssdev->panel.timings = pico_ls_timings;
+
+	picod =  kzalloc(sizeof(struct picodlp_data), GFP_KERNEL);
+	if (!picod)
+		return -ENOMEM;
+
+	mutex_init(&picod->lock);
+	dev_set_drvdata(&dssdev->dev, picod);
+	return 0;
+}
+
+static void picodlp_panel_remove(struct omap_dss_device *dssdev)
+{
+	struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+
+	dev_set_drvdata(&dssdev->dev, NULL);
+	dev_dbg(&dssdev->dev, " removing picodlp panel\n");
+	kfree(picod);
+}
+
+static int picodlp_panel_enable(struct omap_dss_device *dssdev)
+{
+	struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	dev_dbg(&dssdev->dev, "enabling picodlp panel\n");
+
+	mutex_lock(&picod->lock);
+	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
+		mutex_unlock(&picod->lock);
+		return -EINVAL;
+	}
+
+	r = picodlp_panel_power_on(dssdev);
+	mutex_unlock(&picod->lock);
+
+	return r;
+}
+
+static void picodlp_panel_disable(struct omap_dss_device *dssdev)
+{
+	struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&picod->lock);
+	/* Turn off DLP Power */
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+		picodlp_panel_power_off(dssdev);
+
+	dev_dbg(&dssdev->dev, " disabling picodlp panel\n");
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+	mutex_unlock(&picod->lock);
+}
+
+static int picodlp_panel_suspend(struct omap_dss_device *dssdev)
+{
+	struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&picod->lock);
+	/* Turn off DLP Power */
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
+		dev_dbg(&dssdev->dev, " unable to suspend picodlp panel,"\
+						" panel is not ACTIVE\n");
+		mutex_unlock(&picod->lock);
+		return -EINVAL;
+	}
+
+	picodlp_panel_power_off(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+	dev_dbg(&dssdev->dev, " suspending picodlp panel\n");
+
+	mutex_unlock(&picod->lock);
+	return 0;
+}
+
+static int picodlp_panel_resume(struct omap_dss_device *dssdev)
+{
+	struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	mutex_lock(&picod->lock);
+	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
+		dev_dbg(&dssdev->dev, " unable to resume picodlp panel,"
+					" panel is not ACTIVE\n");
+		mutex_unlock(&picod->lock);
+		return -EINVAL;
+	}
+
+	dev_dbg(&dssdev->dev, " resuming picodlp panel\n");
+	r = picodlp_panel_power_on(dssdev);
+	mutex_unlock(&picod->lock);
+
+	return r;
+}
+
+static void picodlp_get_resolution(struct omap_dss_device *dssdev,
+					u16 *xres, u16 *yres)
+{
+	*xres = dssdev->panel.timings.x_res;
+	*yres = dssdev->panel.timings.y_res;
+}
+
+static struct omap_dss_driver picodlp_driver = {
+	.probe		= picodlp_panel_probe,
+	.remove		= picodlp_panel_remove,
+
+	.enable		= picodlp_panel_enable,
+	.disable	= picodlp_panel_disable,
+
+	.get_resolution	= picodlp_get_resolution,
+
+	.suspend	= picodlp_panel_suspend,
+	.resume		= picodlp_panel_resume,
+
+	.driver		= {
+		.name	= "picodlp_panel",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init picodlp_init(void)
+{
+	return omap_dss_register_driver(&picodlp_driver);
+}
+
+static void __exit picodlp_exit(void)
+{
+	omap_dss_unregister_driver(&picodlp_driver);
+}
+
+module_init(picodlp_init);
+module_exit(picodlp_exit);
+
+MODULE_AUTHOR("Mythri P K <mythripk@ti.com>");
+MODULE_DESCRIPTION("picodlp driver");
+MODULE_LICENSE("GPL");
-- 
1.7.1


  parent reply	other threads:[~2011-05-02 14:39 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-02 14:52 [PATCH v2 0/7] picodlp projector driver Mayuresh Janorkar
2011-05-02 14:52 ` [PATCH v2 1/7] OMAP: DSS: Adding a header file for picodlp panel data Mayuresh Janorkar
2011-05-03 18:33   ` Tomi Valkeinen
2011-05-02 14:52 ` [PATCH v2 2/7] OMAP: DSS: Adding a picodlp panel header file Mayuresh Janorkar
2011-05-02 14:52 ` Mayuresh Janorkar [this message]
2011-05-03 18:26   ` [PATCH v2 3/7] OMAP: DSS: Adding a picodlp panel driver Tomi Valkeinen
2011-05-04  9:24     ` Janorkar, Mayuresh
2011-05-02 14:52 ` [PATCH v2 4/7] OMAP: DSS: Add i2c client driver for picodlp Mayuresh Janorkar
2011-05-03 18:44   ` Tomi Valkeinen
2011-05-04 10:01     ` Janorkar, Mayuresh
2011-05-04 11:05       ` Tomi Valkeinen
2011-05-04 14:29         ` Janorkar, Mayuresh
2011-05-02 14:52 ` [PATCH v2 5/7] OMAP: DSS: Adding initialization routine to picodlp panel Mayuresh Janorkar
2011-05-03 18:58   ` Tomi Valkeinen
2011-05-04 14:31     ` Janorkar, Mayuresh
2011-05-05  9:35       ` Tomi Valkeinen
2011-05-02 14:52 ` [PATCH v2 6/7] OMAP4: DSS: Adding a picodlp in OMAP4430 SDP board file Mayuresh Janorkar
2011-05-02 14:52 ` [PATCH v2 7/7] OMAP4: DSS: Adding picodlp panel entry in Kconfig and Makefile Mayuresh Janorkar
2011-05-03 19:06 ` [PATCH v2 0/7] picodlp projector driver Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1304347971-1504-4-git-send-email-mayur@ti.com \
    --to=mayur@ti.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=mythripk@ti.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.