From: Tarun Kanti DebBarma <tarun.kanti@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@ti.com, santosh.shilimkar@ti.com, tony@atomide.com,
linux-arm-kernel@lists.infradead.org, Charulatha V <charu@ti.com>
Subject: [PATCH v4 05/20] gpio/omap: handle save/restore ctx in GPIO driver
Date: Wed, 13 Jul 2011 19:24:04 +0530 [thread overview]
Message-ID: <1310565259-31267-6-git-send-email-tarun.kanti@ti.com> (raw)
In-Reply-To: <1310565259-31267-1-git-send-email-tarun.kanti@ti.com>
From: Charulatha V <charu@ti.com>
Modify omap_gpio_prepare_for_idle() & omap_gpio_resume_after_idle() functions
to handle save context & restore context respectively in the OMAP GPIO driver
itself instead of calling these functions from pm specific files.
For this, in gpio_prepare_for_idle(), call *_get_context_loss_count() and in
gpio_resume_after_idle() call it again. If the count is different, do restore
context. The workaround_enabled flag is no more required and is removed.
Signed-off-by: Charulatha V <charu@ti.com>
---
arch/arm/mach-omap2/gpio.c | 12 +++
arch/arm/mach-omap2/pm34xx.c | 14 ----
arch/arm/plat-omap/include/plat/gpio.h | 5 +-
drivers/gpio/gpio-omap.c | 131 ++++++++++++++------------------
4 files changed, 73 insertions(+), 89 deletions(-)
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 95195a8..2e65377 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -23,6 +23,7 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
#include "powerdomain.h"
@@ -34,6 +35,16 @@ static struct omap_device_pm_latency omap_gpio_latency[] = {
},
};
+#ifdef CONFIG_PM
+static int omap_gpio_get_context_loss(struct device *dev)
+{
+ return omap_pm_get_dev_context_loss_count(dev);
+}
+
+#else
+#define omap_gpio_get_context_loss NULL
+#endif
+
static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
{
struct omap_device *od;
@@ -63,6 +74,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
pdata->bank_width = dev_attr->bank_width;
pdata->dbck_flag = dev_attr->dbck_flag;
pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
+ pdata->get_context_loss_count = omap_gpio_get_context_loss;
pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
if (!pdata) {
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 51d5a5c..0aaa32c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -91,16 +91,6 @@ static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
static struct powerdomain *core_pwrdm, *per_pwrdm;
static struct powerdomain *cam_pwrdm;
-static inline void omap3_per_save_context(void)
-{
- omap_gpio_save_context();
-}
-
-static inline void omap3_per_restore_context(void)
-{
- omap_gpio_restore_context();
-}
-
static void omap3_enable_io_chain(void)
{
int timeout = 0;
@@ -405,8 +395,6 @@ void omap_sram_idle(void)
omap_uart_prepare_idle(2);
omap_uart_prepare_idle(3);
omap2_gpio_prepare_for_idle(per_going_off);
- if (per_next_state == PWRDM_POWER_OFF)
- omap3_per_save_context();
}
/* CORE */
@@ -474,8 +462,6 @@ void omap_sram_idle(void)
if (per_next_state < PWRDM_POWER_ON) {
per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
omap2_gpio_resume_after_idle();
- if (per_prev_state == PWRDM_POWER_OFF)
- omap3_per_restore_context();
omap_uart_resume_idle(2);
omap_uart_resume_idle(3);
}
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 58d0bf2..f7798b5 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -201,14 +201,15 @@ struct omap_gpio_platform_data {
bool loses_context; /* whether the bank would ever lose context */
struct omap_gpio_reg_offs *regs;
+
+ /* Return context loss count due to PM states changing */
+ int (*get_context_loss_count)(struct device *dev);
};
extern void omap2_gpio_prepare_for_idle(int off_mode);
extern void omap2_gpio_resume_after_idle(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
-extern void omap_gpio_save_context(void);
-extern void omap_gpio_restore_context(void);
/*-------------------------------------------------------------------------*/
/* Wrappers for "new style" GPIO calls, using the new infrastructure
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 322ef22..412a2cb 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -72,9 +72,11 @@ struct gpio_bank {
bool loses_context;
int stride;
u32 width;
+ u32 ctx_loss_count;
u16 id;
void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable);
+ int (*get_context_loss_count)(struct device *dev);
struct omap_gpio_reg_offs *regs;
};
@@ -1173,6 +1175,7 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
bank->stride = pdata->bank_stride;
bank->width = pdata->bank_width;
bank->loses_context = pdata->loses_context;
+ bank->get_context_loss_count = pdata->get_context_loss_count;
bank->regs = pdata->regs;
if (bank->regs->set_dataout && bank->regs->clr_dataout)
@@ -1317,11 +1320,11 @@ static struct syscore_ops omap_gpio_syscore_ops = {
#ifdef CONFIG_ARCH_OMAP2PLUS
-static int workaround_enabled;
+static void omap_gpio_save_context(struct gpio_bank *bank);
+static void omap_gpio_restore_context(struct gpio_bank *bank);
void omap2_gpio_prepare_for_idle(int off_mode)
{
- int c = 0;
struct gpio_bank *bank;
list_for_each_entry(bank, &omap_gpio_list, node) {
@@ -1341,7 +1344,7 @@ void omap2_gpio_prepare_for_idle(int off_mode)
* non-wakeup GPIOs. Otherwise spurious IRQs will be
* generated. See OMAP2420 Errata item 1.101. */
if (!(bank->enabled_non_wakeup_gpios))
- continue;
+ goto save_gpio_ctx;
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
bank->saved_datain = __raw_readl(bank->base +
@@ -1378,13 +1381,13 @@ void omap2_gpio_prepare_for_idle(int off_mode)
__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
}
- c++;
- }
- if (!c) {
- workaround_enabled = 0;
- return;
+save_gpio_ctx:
+ if (bank->get_context_loss_count)
+ bank->ctx_loss_count =
+ bank->get_context_loss_count(bank->dev);
+
+ omap_gpio_save_context(bank);
}
- workaround_enabled = 1;
}
void omap2_gpio_resume_after_idle(void)
@@ -1392,6 +1395,7 @@ void omap2_gpio_resume_after_idle(void)
struct gpio_bank *bank;
list_for_each_entry(bank, &omap_gpio_list, node) {
+ u32 ctx_lost_cnt_after;
u32 l = 0, gen, gen0, gen1;
int j;
@@ -1401,8 +1405,13 @@ void omap2_gpio_resume_after_idle(void)
for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
clk_enable(bank->dbck);
- if (!workaround_enabled)
- continue;
+ if (bank->get_context_loss_count) {
+ ctx_lost_cnt_after =
+ bank->get_context_loss_count(bank->dev);
+ if (ctx_lost_cnt_after != bank->ctx_loss_count ||
+ !ctx_lost_cnt_after)
+ omap_gpio_restore_context(bank);
+ }
if (!(bank->enabled_non_wakeup_gpios))
continue;
@@ -1480,74 +1489,50 @@ void omap2_gpio_resume_after_idle(void)
}
}
}
-
}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-void omap_gpio_save_context(void)
+static void omap_gpio_save_context(struct gpio_bank *bank)
{
- struct gpio_bank *bank;
-
- list_for_each_entry(bank, &omap_gpio_list, node) {
-
- if (!bank->loses_context)
- continue;
-
- bank->context.irqenable1 =
- __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
- bank->context.irqenable2 =
- __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
- bank->context.wake_en =
- __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
- bank->context.ctrl =
- __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
- bank->context.oe =
- __raw_readl(bank->base + OMAP24XX_GPIO_OE);
- bank->context.leveldetect0 =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- bank->context.leveldetect1 =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- bank->context.risingdetect =
- __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
- bank->context.fallingdetect =
- __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- bank->context.dataout =
- __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
- }
+ bank->context.irqenable1 =
+ __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
+ bank->context.irqenable2 =
+ __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
+ bank->context.wake_en =
+ __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
+ bank->context.ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+ bank->context.oe = __raw_readl(bank->base + OMAP24XX_GPIO_OE);
+ bank->context.leveldetect0 =
+ __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+ bank->context.leveldetect1 =
+ __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ bank->context.risingdetect =
+ __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+ bank->context.fallingdetect =
+ __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+ bank->context.dataout =
+ __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
}
-void omap_gpio_restore_context(void)
+static void omap_gpio_restore_context(struct gpio_bank *bank)
{
- struct gpio_bank *bank;
-
- list_for_each_entry(bank, &omap_gpio_list, node) {
-
- if (!bank->loses_context)
- continue;
-
- __raw_writel(bank->context.irqenable1,
- bank->base + OMAP24XX_GPIO_IRQENABLE1);
- __raw_writel(bank->context.irqenable2,
- bank->base + OMAP24XX_GPIO_IRQENABLE2);
- __raw_writel(bank->context.wake_en,
- bank->base + OMAP24XX_GPIO_WAKE_EN);
- __raw_writel(bank->context.ctrl,
- bank->base + OMAP24XX_GPIO_CTRL);
- __raw_writel(bank->context.oe,
- bank->base + OMAP24XX_GPIO_OE);
- __raw_writel(bank->context.leveldetect0,
- bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(bank->context.leveldetect1,
- bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(bank->context.risingdetect,
- bank->base + OMAP24XX_GPIO_RISINGDETECT);
- __raw_writel(bank->context.fallingdetect,
- bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(bank->context.dataout,
- bank->base + OMAP24XX_GPIO_DATAOUT);
- }
+ __raw_writel(bank->context.irqenable1,
+ bank->base + OMAP24XX_GPIO_IRQENABLE1);
+ __raw_writel(bank->context.irqenable2,
+ bank->base + OMAP24XX_GPIO_IRQENABLE2);
+ __raw_writel(bank->context.wake_en,
+ bank->base + OMAP24XX_GPIO_WAKE_EN);
+ __raw_writel(bank->context.ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+ __raw_writel(bank->context.oe, bank->base + OMAP24XX_GPIO_OE);
+ __raw_writel(bank->context.leveldetect0,
+ bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+ __raw_writel(bank->context.leveldetect1,
+ bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ __raw_writel(bank->context.risingdetect,
+ bank->base + OMAP24XX_GPIO_RISINGDETECT);
+ __raw_writel(bank->context.fallingdetect,
+ bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+ __raw_writel(bank->context.dataout,
+ bank->base + OMAP24XX_GPIO_DATAOUT);
}
#endif
--
1.6.0.4
WARNING: multiple messages have this Message-ID (diff)
From: tarun.kanti@ti.com (Tarun Kanti DebBarma)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 05/20] gpio/omap: handle save/restore ctx in GPIO driver
Date: Wed, 13 Jul 2011 19:24:04 +0530 [thread overview]
Message-ID: <1310565259-31267-6-git-send-email-tarun.kanti@ti.com> (raw)
In-Reply-To: <1310565259-31267-1-git-send-email-tarun.kanti@ti.com>
From: Charulatha V <charu@ti.com>
Modify omap_gpio_prepare_for_idle() & omap_gpio_resume_after_idle() functions
to handle save context & restore context respectively in the OMAP GPIO driver
itself instead of calling these functions from pm specific files.
For this, in gpio_prepare_for_idle(), call *_get_context_loss_count() and in
gpio_resume_after_idle() call it again. If the count is different, do restore
context. The workaround_enabled flag is no more required and is removed.
Signed-off-by: Charulatha V <charu@ti.com>
---
arch/arm/mach-omap2/gpio.c | 12 +++
arch/arm/mach-omap2/pm34xx.c | 14 ----
arch/arm/plat-omap/include/plat/gpio.h | 5 +-
drivers/gpio/gpio-omap.c | 131 ++++++++++++++------------------
4 files changed, 73 insertions(+), 89 deletions(-)
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 95195a8..2e65377 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -23,6 +23,7 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
#include "powerdomain.h"
@@ -34,6 +35,16 @@ static struct omap_device_pm_latency omap_gpio_latency[] = {
},
};
+#ifdef CONFIG_PM
+static int omap_gpio_get_context_loss(struct device *dev)
+{
+ return omap_pm_get_dev_context_loss_count(dev);
+}
+
+#else
+#define omap_gpio_get_context_loss NULL
+#endif
+
static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
{
struct omap_device *od;
@@ -63,6 +74,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
pdata->bank_width = dev_attr->bank_width;
pdata->dbck_flag = dev_attr->dbck_flag;
pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
+ pdata->get_context_loss_count = omap_gpio_get_context_loss;
pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
if (!pdata) {
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 51d5a5c..0aaa32c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -91,16 +91,6 @@ static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
static struct powerdomain *core_pwrdm, *per_pwrdm;
static struct powerdomain *cam_pwrdm;
-static inline void omap3_per_save_context(void)
-{
- omap_gpio_save_context();
-}
-
-static inline void omap3_per_restore_context(void)
-{
- omap_gpio_restore_context();
-}
-
static void omap3_enable_io_chain(void)
{
int timeout = 0;
@@ -405,8 +395,6 @@ void omap_sram_idle(void)
omap_uart_prepare_idle(2);
omap_uart_prepare_idle(3);
omap2_gpio_prepare_for_idle(per_going_off);
- if (per_next_state == PWRDM_POWER_OFF)
- omap3_per_save_context();
}
/* CORE */
@@ -474,8 +462,6 @@ void omap_sram_idle(void)
if (per_next_state < PWRDM_POWER_ON) {
per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
omap2_gpio_resume_after_idle();
- if (per_prev_state == PWRDM_POWER_OFF)
- omap3_per_restore_context();
omap_uart_resume_idle(2);
omap_uart_resume_idle(3);
}
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 58d0bf2..f7798b5 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -201,14 +201,15 @@ struct omap_gpio_platform_data {
bool loses_context; /* whether the bank would ever lose context */
struct omap_gpio_reg_offs *regs;
+
+ /* Return context loss count due to PM states changing */
+ int (*get_context_loss_count)(struct device *dev);
};
extern void omap2_gpio_prepare_for_idle(int off_mode);
extern void omap2_gpio_resume_after_idle(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
-extern void omap_gpio_save_context(void);
-extern void omap_gpio_restore_context(void);
/*-------------------------------------------------------------------------*/
/* Wrappers for "new style" GPIO calls, using the new infrastructure
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 322ef22..412a2cb 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -72,9 +72,11 @@ struct gpio_bank {
bool loses_context;
int stride;
u32 width;
+ u32 ctx_loss_count;
u16 id;
void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable);
+ int (*get_context_loss_count)(struct device *dev);
struct omap_gpio_reg_offs *regs;
};
@@ -1173,6 +1175,7 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
bank->stride = pdata->bank_stride;
bank->width = pdata->bank_width;
bank->loses_context = pdata->loses_context;
+ bank->get_context_loss_count = pdata->get_context_loss_count;
bank->regs = pdata->regs;
if (bank->regs->set_dataout && bank->regs->clr_dataout)
@@ -1317,11 +1320,11 @@ static struct syscore_ops omap_gpio_syscore_ops = {
#ifdef CONFIG_ARCH_OMAP2PLUS
-static int workaround_enabled;
+static void omap_gpio_save_context(struct gpio_bank *bank);
+static void omap_gpio_restore_context(struct gpio_bank *bank);
void omap2_gpio_prepare_for_idle(int off_mode)
{
- int c = 0;
struct gpio_bank *bank;
list_for_each_entry(bank, &omap_gpio_list, node) {
@@ -1341,7 +1344,7 @@ void omap2_gpio_prepare_for_idle(int off_mode)
* non-wakeup GPIOs. Otherwise spurious IRQs will be
* generated. See OMAP2420 Errata item 1.101. */
if (!(bank->enabled_non_wakeup_gpios))
- continue;
+ goto save_gpio_ctx;
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
bank->saved_datain = __raw_readl(bank->base +
@@ -1378,13 +1381,13 @@ void omap2_gpio_prepare_for_idle(int off_mode)
__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
}
- c++;
- }
- if (!c) {
- workaround_enabled = 0;
- return;
+save_gpio_ctx:
+ if (bank->get_context_loss_count)
+ bank->ctx_loss_count =
+ bank->get_context_loss_count(bank->dev);
+
+ omap_gpio_save_context(bank);
}
- workaround_enabled = 1;
}
void omap2_gpio_resume_after_idle(void)
@@ -1392,6 +1395,7 @@ void omap2_gpio_resume_after_idle(void)
struct gpio_bank *bank;
list_for_each_entry(bank, &omap_gpio_list, node) {
+ u32 ctx_lost_cnt_after;
u32 l = 0, gen, gen0, gen1;
int j;
@@ -1401,8 +1405,13 @@ void omap2_gpio_resume_after_idle(void)
for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
clk_enable(bank->dbck);
- if (!workaround_enabled)
- continue;
+ if (bank->get_context_loss_count) {
+ ctx_lost_cnt_after =
+ bank->get_context_loss_count(bank->dev);
+ if (ctx_lost_cnt_after != bank->ctx_loss_count ||
+ !ctx_lost_cnt_after)
+ omap_gpio_restore_context(bank);
+ }
if (!(bank->enabled_non_wakeup_gpios))
continue;
@@ -1480,74 +1489,50 @@ void omap2_gpio_resume_after_idle(void)
}
}
}
-
}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-void omap_gpio_save_context(void)
+static void omap_gpio_save_context(struct gpio_bank *bank)
{
- struct gpio_bank *bank;
-
- list_for_each_entry(bank, &omap_gpio_list, node) {
-
- if (!bank->loses_context)
- continue;
-
- bank->context.irqenable1 =
- __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
- bank->context.irqenable2 =
- __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
- bank->context.wake_en =
- __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
- bank->context.ctrl =
- __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
- bank->context.oe =
- __raw_readl(bank->base + OMAP24XX_GPIO_OE);
- bank->context.leveldetect0 =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- bank->context.leveldetect1 =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- bank->context.risingdetect =
- __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
- bank->context.fallingdetect =
- __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- bank->context.dataout =
- __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
- }
+ bank->context.irqenable1 =
+ __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
+ bank->context.irqenable2 =
+ __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
+ bank->context.wake_en =
+ __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
+ bank->context.ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+ bank->context.oe = __raw_readl(bank->base + OMAP24XX_GPIO_OE);
+ bank->context.leveldetect0 =
+ __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+ bank->context.leveldetect1 =
+ __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ bank->context.risingdetect =
+ __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+ bank->context.fallingdetect =
+ __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+ bank->context.dataout =
+ __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
}
-void omap_gpio_restore_context(void)
+static void omap_gpio_restore_context(struct gpio_bank *bank)
{
- struct gpio_bank *bank;
-
- list_for_each_entry(bank, &omap_gpio_list, node) {
-
- if (!bank->loses_context)
- continue;
-
- __raw_writel(bank->context.irqenable1,
- bank->base + OMAP24XX_GPIO_IRQENABLE1);
- __raw_writel(bank->context.irqenable2,
- bank->base + OMAP24XX_GPIO_IRQENABLE2);
- __raw_writel(bank->context.wake_en,
- bank->base + OMAP24XX_GPIO_WAKE_EN);
- __raw_writel(bank->context.ctrl,
- bank->base + OMAP24XX_GPIO_CTRL);
- __raw_writel(bank->context.oe,
- bank->base + OMAP24XX_GPIO_OE);
- __raw_writel(bank->context.leveldetect0,
- bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(bank->context.leveldetect1,
- bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(bank->context.risingdetect,
- bank->base + OMAP24XX_GPIO_RISINGDETECT);
- __raw_writel(bank->context.fallingdetect,
- bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(bank->context.dataout,
- bank->base + OMAP24XX_GPIO_DATAOUT);
- }
+ __raw_writel(bank->context.irqenable1,
+ bank->base + OMAP24XX_GPIO_IRQENABLE1);
+ __raw_writel(bank->context.irqenable2,
+ bank->base + OMAP24XX_GPIO_IRQENABLE2);
+ __raw_writel(bank->context.wake_en,
+ bank->base + OMAP24XX_GPIO_WAKE_EN);
+ __raw_writel(bank->context.ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+ __raw_writel(bank->context.oe, bank->base + OMAP24XX_GPIO_OE);
+ __raw_writel(bank->context.leveldetect0,
+ bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+ __raw_writel(bank->context.leveldetect1,
+ bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ __raw_writel(bank->context.risingdetect,
+ bank->base + OMAP24XX_GPIO_RISINGDETECT);
+ __raw_writel(bank->context.fallingdetect,
+ bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+ __raw_writel(bank->context.dataout,
+ bank->base + OMAP24XX_GPIO_DATAOUT);
}
#endif
--
1.6.0.4
next prev parent reply other threads:[~2011-07-13 13:54 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-13 13:53 [PATCH v4 00/20] gpio/omap: driver cleanup and fixes Tarun Kanti DebBarma
2011-07-13 13:53 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 01/20] gpio/omap: remove dependency on gpio_bank_count Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 02/20] gpio/omap: use flag to identify wakeup domain Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 03/20] gpio/omap: make gpio_context part of gpio_bank structure Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 04/20] gpio/omap: fix pwrdm_post_transition call sequence Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma [this message]
2011-07-13 13:54 ` [PATCH v4 05/20] gpio/omap: handle save/restore ctx in GPIO driver Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 06/20] gpio/omap: make non-wakeup GPIO part of pdata Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 07/20] gpio/omap: avoid cpu checks during module ena/disable Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 08/20] gpio/omap: further cleanup using wakeup_status register Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 09/20] gpio/omap: cleanup omap1 related macros Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 10/20] gpio/omap: use level/edge detect reg offsets Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 11/20] gpio/omap: remove hardcoded offsets in ctxt save/restore Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 12/20] gpio/omap: cleanup set_gpio_triggering function Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 13/20] gpio/omap: cleanup omap_gpio_mod_init function Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-14 5:56 ` Todd Poynor
2011-07-14 5:56 ` Todd Poynor
2011-07-14 5:57 ` DebBarma, Tarun Kanti
2011-07-14 5:57 ` DebBarma, Tarun Kanti
2011-07-13 13:54 ` [PATCH v4 14/20] gpio/omap: use pinctrl offset instead of macro Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 15/20] gpio/omap: use readl in irq_handler for all access Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 16/20] gpio/omap: remove bank->method & METHOD_* macros Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 17/20] gpio/omap: fix bankwidth for OMAP7xx MPUIO Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 18/20] gpio/omap: use pm-runtime framework Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-14 6:09 ` Todd Poynor
2011-07-14 6:09 ` Todd Poynor
2011-07-14 7:22 ` DebBarma, Tarun Kanti
2011-07-14 7:22 ` DebBarma, Tarun Kanti
2011-07-13 13:54 ` [PATCH v4 19/20] gpio/omap: optimize suspend and resume functions Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
2011-07-13 13:54 ` [PATCH v4 20/20] gpio/omap: cleanup prepare_for_idle and resume_after_idle Tarun Kanti DebBarma
2011-07-13 13:54 ` Tarun Kanti DebBarma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310565259-31267-6-git-send-email-tarun.kanti@ti.com \
--to=tarun.kanti@ti.com \
--cc=charu@ti.com \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.