From: tony.lin@freescale.com (Tony Lin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/7] enable usb1 phy power supply
Date: Wed, 20 Jul 2011 19:08:21 +0800 [thread overview]
Message-ID: <1311160106-4898-3-git-send-email-tony.lin@freescale.com> (raw)
In-Reply-To: <1311160106-4898-1-git-send-email-tony.lin@freescale.com>
configure usb1 phy power enable gpio and enable usb1 phy power
Signed-off-by: Tony Lin <tony.lin@freescale.com>
---
arch/arm/mach-mxs/mach-mx28evk.c | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index eaaf6ff..6934867 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -34,6 +34,7 @@
#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30)
#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
+#define MX28EVK_USB1_PWR_EN MXS_GPIO_NR(3, 8)
#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12)
#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28)
@@ -183,6 +184,8 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = {
/* led */
MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
+ /* usb1 */
+ MX28_PAD_AUART2_RX__GPIO_3_8 | MXS_PAD_CTRL,
};
/* led */
@@ -405,6 +408,12 @@ static void __init mx28evk_init(void)
pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+ ret = gpio_request_one(MX28EVK_USB1_PWR_EN, GPIOF_DIR_OUT,
+ "usb1-power-en");
+ if (ret)
+ pr_warn("failed to request gpio usb1-power-en %d\n", ret);
+ else
+ gpio_set_value(MX28EVK_USB1_PWR_EN, 1);
gpio_led_register_device(0, &mx28evk_led_data);
}
--
1.7.0.4
next prev parent reply other threads:[~2011-07-20 11:08 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-20 11:08 [PATCH 0/7] ARM: mx28: add usb host function Tony Lin
2011-07-20 10:57 ` Felipe Balbi
2011-07-20 11:08 ` [PATCH 1/7] consolidate definitions and structures to share among platforms Tony Lin
2011-07-20 10:59 ` Felipe Balbi
2011-07-20 11:03 ` Lin Tony-B19295
2011-07-20 11:16 ` Felipe Balbi
2011-07-20 11:21 ` Lin Tony-B19295
2011-07-20 11:08 ` Tony Lin [this message]
2011-07-20 11:01 ` [PATCH 2/7] enable usb1 phy power supply Felipe Balbi
2011-07-20 11:41 ` Wolfram Sang
2011-07-22 2:16 ` Lin Tony-B19295
2011-07-20 19:08 ` Sascha Hauer
2011-07-22 2:20 ` Lin Tony-B19295
2011-07-20 11:08 ` [PATCH 3/7] add usb phy clocks to clock tree Tony Lin
2011-07-20 11:02 ` Felipe Balbi
2011-07-20 11:05 ` Lin Tony-B19295
2011-07-20 19:10 ` Sascha Hauer
2011-07-22 6:02 ` Lin Tony-B19295
2011-07-22 9:18 ` Sascha Hauer
2011-07-20 11:08 ` [PATCH 4/7] mx28: add usb host phy functions Tony Lin
2011-07-20 11:12 ` Felipe Balbi
2011-07-20 19:26 ` Sascha Hauer
2011-07-22 2:23 ` Lin Tony-B19295
2011-07-21 6:04 ` Lothar Waßmann
2011-07-20 11:08 ` [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28 Tony Lin
2011-07-20 11:05 ` Arnaud Patard (Rtp)
2011-07-20 11:08 ` Lin Tony-B19295
2011-07-20 11:45 ` Wolfram Sang
2011-07-20 11:14 ` Felipe Balbi
2011-07-20 11:21 ` Lin Tony-B19295
2011-07-20 11:23 ` Felipe Balbi
2011-07-20 11:25 ` Lin Tony-B19295
2011-07-20 11:27 ` Felipe Balbi
2011-07-20 13:59 ` Alan Stern
2011-07-22 5:18 ` Lin Tony-B19295
2011-07-20 19:41 ` Sascha Hauer
2011-07-20 11:08 ` [PATCH 6/7] add macro definitions according to ehci-mxc driver change Tony Lin
2011-07-20 19:43 ` Sascha Hauer
2011-07-21 6:06 ` Lothar Waßmann
2011-07-20 11:08 ` [PATCH 7/7] add usb host function to default config Tony Lin
2011-07-20 20:07 ` [PATCH 0/7] ARM: mx28: add usb host function Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311160106-4898-3-git-send-email-tony.lin@freescale.com \
--to=tony.lin@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.