All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ajay Kumar <ajaykumar.rs@samsung.com>
To: kgene.kim@samsung.com, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, jg1.han@samsung.com,
	m.szyprowski@samsung.com
Subject: [PATCH V2 4/7] ARM: S5P64X0: Add GPIO and SPCON settings for LCD
Date: Mon, 25 Jul 2011 16:00:22 -0400	[thread overview]
Message-ID: <1311624025-2643-5-git-send-email-ajaykumar.rs@samsung.com> (raw)
In-Reply-To: <1311624025-2643-1-git-send-email-ajaykumar.rs@samsung.com>

This patch adds:
	-- GPIO lines settings(HSYNC, VSYNC, VCLK and VD) for LCD.
	-- Function to select LCD interface (RGB/i80)

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
---
 arch/arm/mach-s5p64x0/Kconfig                  |    6 +++
 arch/arm/mach-s5p64x0/Makefile                 |    1 +
 arch/arm/mach-s5p64x0/include/mach/regs-gpio.h |    4 ++
 arch/arm/mach-s5p64x0/setup-fb.c               |   48 ++++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/fb.h        |   14 +++++++
 5 files changed, 73 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-s5p64x0/setup-fb.c

diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 65c7518..4fee745 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -21,6 +21,12 @@ config CPU_S5P6450
 	help
 	  Enable S5P6450 CPU support
 
+config S5P64X0_SETUP_FB
+	bool
+	help
+	  Common setup code for S5P64X0 based boards with a LCD display
+	  through RGB interface.
+
 config S5P64X0_SETUP_I2C1
 	bool
 	help
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index 5f6afdf..487d179 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -28,3 +28,4 @@ obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
 obj-$(CONFIG_S5P64X0_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5P64X0_SETUP_FB)		+= setup-fb.o
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
index 6ce2547..34d4412 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -44,4 +44,8 @@
 #define S5P64X0_EINT0MASK		(S5P_VA_GPIO + EINT0MASK_OFFSET)
 #define S5P64X0_EINT0PEND		(S5P_VA_GPIO + EINT0PEND_OFFSET)
 
+#define S5P64X0_SPCON0			(S5P_VA_GPIO + 0x1A0)
+#define S5P64X0_SPCON0_LCD_SEL_MASK	(0x3 << 0)
+#define S5P64X0_SPCON0_LCD_SEL_RGB	(0x1 << 0)
+
 #endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/setup-fb.c b/arch/arm/mach-s5p64x0/setup-fb.c
new file mode 100644
index 0000000..0d9903a
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-fb.c
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s5p64x0/setup-fb.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *         http://www.samsung.com/
+ *
+ * Base S5P64X0 GPIO setup information for LCD framebuffer
+ *
+ * GPIO settings for LCD on any other board based on s5p64x0
+ * should go in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+void s5p64x0_fb_init(int lcd_interface_type)
+{
+	unsigned int cfg;
+
+	/* select TFT LCD type (RGB I/F) */
+	cfg = __raw_readl(S5P64X0_SPCON0);
+	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+	cfg |= lcd_interface_type;
+	__raw_writel(cfg, S5P64X0_SPCON0);
+}
+
+void s5p64x0_fb_gpio_setup_24bpp(void)
+{
+	unsigned int chipid;
+
+	chipid = __raw_readl(S5P64X0_SYS_ID) & 0xf0000;
+	if (chipid == 0x40000) {
+		s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
+	} else if (chipid == 0x50000) {
+		s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
+	}
+}
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 01f10e4..bd79c0a 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -109,4 +109,18 @@ extern void s5pv210_fb_gpio_setup_24bpp(void);
  */
 extern void exynos4_fimd0_gpio_setup_24bpp(void);
 
+/**
+ * s5p64x0_fb_init() - Common setup function for LCD
+ *
+ * Select LCD I/F configuration-RGB style or i80 style
+ */
+extern void s5p64x0_fb_init(int lcd_interface_type);
+
+/**
+ * s5p64x0_fb_gpio_setup_24bpp() - Common GPIO setup function for LCD
+ *
+ * Initialise the GPIO for a LCD display on the RGB interface.
+ */
+extern void s5p64x0_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */
-- 
1.7.0.4

WARNING: multiple messages have this Message-ID (diff)
From: ajaykumar.rs@samsung.com (Ajay Kumar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 4/7] ARM: S5P64X0: Add GPIO and SPCON settings for LCD
Date: Mon, 25 Jul 2011 16:00:22 -0400	[thread overview]
Message-ID: <1311624025-2643-5-git-send-email-ajaykumar.rs@samsung.com> (raw)
In-Reply-To: <1311624025-2643-1-git-send-email-ajaykumar.rs@samsung.com>

This patch adds:
	-- GPIO lines settings(HSYNC, VSYNC, VCLK and VD) for LCD.
	-- Function to select LCD interface (RGB/i80)

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
---
 arch/arm/mach-s5p64x0/Kconfig                  |    6 +++
 arch/arm/mach-s5p64x0/Makefile                 |    1 +
 arch/arm/mach-s5p64x0/include/mach/regs-gpio.h |    4 ++
 arch/arm/mach-s5p64x0/setup-fb.c               |   48 ++++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/fb.h        |   14 +++++++
 5 files changed, 73 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-s5p64x0/setup-fb.c

diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 65c7518..4fee745 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -21,6 +21,12 @@ config CPU_S5P6450
 	help
 	  Enable S5P6450 CPU support
 
+config S5P64X0_SETUP_FB
+	bool
+	help
+	  Common setup code for S5P64X0 based boards with a LCD display
+	  through RGB interface.
+
 config S5P64X0_SETUP_I2C1
 	bool
 	help
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index 5f6afdf..487d179 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -28,3 +28,4 @@ obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
 obj-$(CONFIG_S5P64X0_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5P64X0_SETUP_FB)		+= setup-fb.o
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
index 6ce2547..34d4412 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -44,4 +44,8 @@
 #define S5P64X0_EINT0MASK		(S5P_VA_GPIO + EINT0MASK_OFFSET)
 #define S5P64X0_EINT0PEND		(S5P_VA_GPIO + EINT0PEND_OFFSET)
 
+#define S5P64X0_SPCON0			(S5P_VA_GPIO + 0x1A0)
+#define S5P64X0_SPCON0_LCD_SEL_MASK	(0x3 << 0)
+#define S5P64X0_SPCON0_LCD_SEL_RGB	(0x1 << 0)
+
 #endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/setup-fb.c b/arch/arm/mach-s5p64x0/setup-fb.c
new file mode 100644
index 0000000..0d9903a
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-fb.c
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s5p64x0/setup-fb.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *         http://www.samsung.com/
+ *
+ * Base S5P64X0 GPIO setup information for LCD framebuffer
+ *
+ * GPIO settings for LCD on any other board based on s5p64x0
+ * should go in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+void s5p64x0_fb_init(int lcd_interface_type)
+{
+	unsigned int cfg;
+
+	/* select TFT LCD type (RGB I/F) */
+	cfg = __raw_readl(S5P64X0_SPCON0);
+	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+	cfg |= lcd_interface_type;
+	__raw_writel(cfg, S5P64X0_SPCON0);
+}
+
+void s5p64x0_fb_gpio_setup_24bpp(void)
+{
+	unsigned int chipid;
+
+	chipid = __raw_readl(S5P64X0_SYS_ID) & 0xf0000;
+	if (chipid == 0x40000) {
+		s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
+	} else if (chipid == 0x50000) {
+		s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
+	}
+}
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 01f10e4..bd79c0a 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -109,4 +109,18 @@ extern void s5pv210_fb_gpio_setup_24bpp(void);
  */
 extern void exynos4_fimd0_gpio_setup_24bpp(void);
 
+/**
+ * s5p64x0_fb_init() - Common setup function for LCD
+ *
+ * Select LCD I/F configuration-RGB style or i80 style
+ */
+extern void s5p64x0_fb_init(int lcd_interface_type);
+
+/**
+ * s5p64x0_fb_gpio_setup_24bpp() - Common GPIO setup function for LCD
+ *
+ * Initialise the GPIO for a LCD display on the RGB interface.
+ */
+extern void s5p64x0_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */
-- 
1.7.0.4

  parent reply	other threads:[~2011-07-25 14:08 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-25 20:00 [PATCH V2 0/7] ARM: S5P64X0: Add Framebuffer support Ajay Kumar
2011-07-25 20:00 ` Ajay Kumar
2011-07-25 20:00 ` [PATCH RESEND 1/7] video: s3c-fb: Add S5P64X0 specific s3c_fb_driverdata Ajay Kumar
2011-07-25 20:00   ` Ajay Kumar
2011-07-25 20:00 ` [PATCH V2 2/7] ARM: S5P64X0: Add register base and IRQ for Framebuffer Ajay Kumar
2011-07-25 20:00   ` Ajay Kumar
2011-07-25 20:00 ` [PATCH RESEND 3/7] ARM: S5P64X0: Set s3c_device_fb name Ajay Kumar
2011-07-25 20:00   ` Ajay Kumar
2011-07-25 20:00 ` Ajay Kumar [this message]
2011-07-25 20:00   ` [PATCH V2 4/7] ARM: S5P64X0: Add GPIO and SPCON settings for LCD Ajay Kumar
2011-07-25 20:00 ` [PATCH V2 5/7] ARM: S5P64X0: Add file to hold common Framebuffer and LCD code Ajay Kumar
2011-07-25 20:00   ` Ajay Kumar
2011-07-26  8:00   ` Russell King - ARM Linux
2011-07-26  8:00     ` Russell King - ARM Linux
2011-07-25 20:00 ` [PATCH V2 6/7] ARM: S5P6440: Enable LCD-LTE480 and Framebuffer support Ajay Kumar
2011-07-25 20:00   ` Ajay Kumar
2011-07-25 20:00 ` [PATCH V2 7/7] ARM: S5P6450: " Ajay Kumar
2011-07-25 20:00   ` Ajay Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1311624025-2643-5-git-send-email-ajaykumar.rs@samsung.com \
    --to=ajaykumar.rs@samsung.com \
    --cc=jg1.han@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.