All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Brown <davidb@codeaurora.org>
To: David Brown <davidb@codeaurora.org>,
	Daniel Walker <dwalker@fifo99.com>,
	Bryan Huntsman <bryanh@codeaurora.org>,
	Russell King <linux@arm.linux.org.uk>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Nicolas Pitre <nicolas.pitre@linaro.org>
Subject: [PATCH 1/2] ARM: msm: Remove .boot_params from MSM boardfiles
Date: Thu, 28 Jul 2011 13:18:10 -0700	[thread overview]
Message-ID: <1311884291-5409-1-git-send-email-davidb@codeaurora.org> (raw)
In-Reply-To: <1311794355-26988-2-git-send-email-sboyd@codeaurora.org>

The bootloaders on MSM always pass the ATAGs address to the kernel in
r2.  It isn't necessary to set .boot_params in the machine
descriptors, and this unnecessarily hinders having a common kernel for
multiple targets, so remove them.

Signed-off-by: David Brown <davidb@codeaurora.org>

diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index c03f269..f7acdc5 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -130,7 +130,6 @@ static void __init msm7x2x_map_io(void)
 }
 
 MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
@@ -138,7 +137,6 @@ MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
@@ -146,7 +144,6 @@ MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
 MACHINE_END
 
 MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
@@ -154,7 +151,6 @@ MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index d1e4cc8..4d5065f 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -122,7 +122,6 @@ static void __init msm7x30_map_io(void)
 }
 
 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
 	.fixup = msm7x30_fixup,
 	.reserve = msm7x30_reserve,
 	.map_io = msm7x30_map_io,
@@ -132,7 +131,6 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
 	.fixup = msm7x30_fixup,
 	.reserve = msm7x30_reserve,
 	.map_io = msm7x30_map_io,
@@ -142,7 +140,6 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
 MACHINE_END
 
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
 	.fixup = msm7x30_fixup,
 	.reserve = msm7x30_reserve,
 	.map_io = msm7x30_map_io,
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 6a96911..94cca95 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -193,7 +193,6 @@ static void __init qsd8x50_init(void)
 }
 
 MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
 	.map_io = qsd8x50_map_io,
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
@@ -201,7 +200,6 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
 MACHINE_END
 
 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
 	.map_io = qsd8x50_map_io,
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 68f930f..950a27e 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -105,7 +105,6 @@ static void __init sapphire_map_io(void)
 
 MACHINE_START(SAPPHIRE, "sapphire")
 /* Maintainer: Brian Swetland <swetland@google.com> */
-	.boot_params    = PLAT_PHYS_OFFSET + 0x100,
 	.fixup          = sapphire_fixup,
 	.map_io         = sapphire_map_io,
 	.init_irq       = sapphire_init_irq,
-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

WARNING: multiple messages have this Message-ID (diff)
From: davidb@codeaurora.org (David Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: msm: Remove .boot_params from MSM boardfiles
Date: Thu, 28 Jul 2011 13:18:10 -0700	[thread overview]
Message-ID: <1311884291-5409-1-git-send-email-davidb@codeaurora.org> (raw)
In-Reply-To: <1311794355-26988-2-git-send-email-sboyd@codeaurora.org>

The bootloaders on MSM always pass the ATAGs address to the kernel in
r2.  It isn't necessary to set .boot_params in the machine
descriptors, and this unnecessarily hinders having a common kernel for
multiple targets, so remove them.

Signed-off-by: David Brown <davidb@codeaurora.org>

diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index c03f269..f7acdc5 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -130,7 +130,6 @@ static void __init msm7x2x_map_io(void)
 }
 
 MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
@@ -138,7 +137,6 @@ MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
@@ -146,7 +144,6 @@ MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
 MACHINE_END
 
 MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
@@ -154,7 +151,6 @@ MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index d1e4cc8..4d5065f 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -122,7 +122,6 @@ static void __init msm7x30_map_io(void)
 }
 
 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
 	.fixup = msm7x30_fixup,
 	.reserve = msm7x30_reserve,
 	.map_io = msm7x30_map_io,
@@ -132,7 +131,6 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
 	.fixup = msm7x30_fixup,
 	.reserve = msm7x30_reserve,
 	.map_io = msm7x30_map_io,
@@ -142,7 +140,6 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
 MACHINE_END
 
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
 	.fixup = msm7x30_fixup,
 	.reserve = msm7x30_reserve,
 	.map_io = msm7x30_map_io,
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 6a96911..94cca95 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -193,7 +193,6 @@ static void __init qsd8x50_init(void)
 }
 
 MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
 	.map_io = qsd8x50_map_io,
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
@@ -201,7 +200,6 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
 MACHINE_END
 
 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
 	.map_io = qsd8x50_map_io,
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 68f930f..950a27e 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -105,7 +105,6 @@ static void __init sapphire_map_io(void)
 
 MACHINE_START(SAPPHIRE, "sapphire")
 /* Maintainer: Brian Swetland <swetland@google.com> */
-	.boot_params    = PLAT_PHYS_OFFSET + 0x100,
 	.fixup          = sapphire_fixup,
 	.map_io         = sapphire_map_io,
 	.init_irq       = sapphire_init_irq,
-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

  reply	other threads:[~2011-07-28 20:18 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-27 19:19 [PATCHv4 1/2] ARM: Set proper TEXT_OFFSET for newer MSMs Stephen Boyd
2011-07-27 19:19 ` Stephen Boyd
2011-07-27 19:19 ` [PATCHv4 2/2] ARM: P2V: Remove ARM_PATCH_PHYS_VIRT_16BIT Stephen Boyd
2011-07-27 19:19   ` Stephen Boyd
2011-07-28 20:18   ` David Brown [this message]
2011-07-28 20:18     ` [PATCH 1/2] ARM: msm: Remove .boot_params from MSM boardfiles David Brown
2011-07-28 20:18     ` [PATCH 2/2] ARM: msm: Remove PLAT_PHYS_OFFSETS from MSM targets David Brown
2011-07-28 20:18       ` David Brown
2011-07-28 20:49       ` Nicolas Pitre
2011-07-28 20:49         ` Nicolas Pitre
2011-07-28 21:00         ` David Brown
2011-07-28 21:00           ` David Brown
2011-07-29 10:32       ` Russell King - ARM Linux
2011-07-29 10:32         ` Russell King - ARM Linux
2011-07-29 12:42         ` Nicolas Pitre
2011-07-29 12:42           ` Nicolas Pitre
2011-07-29 14:01           ` David Brown
2011-07-29 14:01             ` David Brown
2011-08-11  9:32   ` [PATCHv4 2/2] ARM: P2V: Remove ARM_PATCH_PHYS_VIRT_16BIT Russell King - ARM Linux
2011-08-11  9:32     ` Russell King - ARM Linux
2011-08-11 21:11 ` [PATCHv4 1/2] ARM: Set proper TEXT_OFFSET for newer MSMs David Brown
2011-08-11 21:11   ` David Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1311884291-5409-1-git-send-email-davidb@codeaurora.org \
    --to=davidb@codeaurora.org \
    --cc=bryanh@codeaurora.org \
    --cc=dwalker@fifo99.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=nicolas.pitre@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.