From: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org> To: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, khilman-l0cyMroinI0@public.gmane.org, rnayak-l0cyMroinI0@public.gmane.org, balajitk-l0cyMroinI0@public.gmane.org, santosh.shilimkar-l0cyMroinI0@public.gmane.org, Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org> Subject: [PATCHv6 3/3] OMAP: I2C: Remove the SYSC register definition Date: Fri, 5 Aug 2011 11:30:35 +0530 [thread overview] Message-ID: <1312524035-5549-3-git-send-email-shubhrajyoti@ti.com> (raw) In-Reply-To: <1312524035-5549-1-git-send-email-shubhrajyoti-l0cyMroinI0@public.gmane.org> The SYSC register should not accessed in the driver removing the define from the driver. Also clean up the syscstate from the omap_i2c_dev struct. Acked-by: Santosh Shilimkar <santosh.shilimkar-l0cyMroinI0@public.gmane.org> Signed-off-by: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org> --- drivers/i2c/busses/i2c-omap.c | 5 ----- 1 files changed, 0 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index d8f4470..d05efe7 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -63,7 +63,6 @@ enum { OMAP_I2C_BUF_REG, OMAP_I2C_CNT_REG, OMAP_I2C_DATA_REG, - OMAP_I2C_SYSC_REG, OMAP_I2C_CON_REG, OMAP_I2C_OA_REG, OMAP_I2C_SA_REG, @@ -187,7 +186,6 @@ struct omap_i2c_dev { u16 scllstate; u16 sclhstate; u16 bufstate; - u16 syscstate; u16 westate; u16 errata; }; @@ -202,7 +200,6 @@ const static u8 reg_map_ip_v1[] = { [OMAP_I2C_BUF_REG] = 0x05, [OMAP_I2C_CNT_REG] = 0x06, [OMAP_I2C_DATA_REG] = 0x07, - [OMAP_I2C_SYSC_REG] = 0x08, [OMAP_I2C_CON_REG] = 0x09, [OMAP_I2C_OA_REG] = 0x0a, [OMAP_I2C_SA_REG] = 0x0b, @@ -223,7 +220,6 @@ const static u8 reg_map_ip_v2[] = { [OMAP_I2C_BUF_REG] = 0x94, [OMAP_I2C_CNT_REG] = 0x98, [OMAP_I2C_DATA_REG] = 0x9c, - [OMAP_I2C_SYSC_REG] = 0x20, [OMAP_I2C_CON_REG] = 0xa4, [OMAP_I2C_OA_REG] = 0xa8, [OMAP_I2C_SA_REG] = 0xac, @@ -264,7 +260,6 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev) omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate); omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate); omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate); - omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, dev->syscstate); omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate); omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); } -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: shubhrajyoti@ti.com (Shubhrajyoti D) To: linux-arm-kernel@lists.infradead.org Subject: [PATCHv6 3/3] OMAP: I2C: Remove the SYSC register definition Date: Fri, 5 Aug 2011 11:30:35 +0530 [thread overview] Message-ID: <1312524035-5549-3-git-send-email-shubhrajyoti@ti.com> (raw) In-Reply-To: <1312524035-5549-1-git-send-email-shubhrajyoti@ti.com> The SYSC register should not accessed in the driver removing the define from the driver. Also clean up the syscstate from the omap_i2c_dev struct. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> --- drivers/i2c/busses/i2c-omap.c | 5 ----- 1 files changed, 0 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index d8f4470..d05efe7 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -63,7 +63,6 @@ enum { OMAP_I2C_BUF_REG, OMAP_I2C_CNT_REG, OMAP_I2C_DATA_REG, - OMAP_I2C_SYSC_REG, OMAP_I2C_CON_REG, OMAP_I2C_OA_REG, OMAP_I2C_SA_REG, @@ -187,7 +186,6 @@ struct omap_i2c_dev { u16 scllstate; u16 sclhstate; u16 bufstate; - u16 syscstate; u16 westate; u16 errata; }; @@ -202,7 +200,6 @@ const static u8 reg_map_ip_v1[] = { [OMAP_I2C_BUF_REG] = 0x05, [OMAP_I2C_CNT_REG] = 0x06, [OMAP_I2C_DATA_REG] = 0x07, - [OMAP_I2C_SYSC_REG] = 0x08, [OMAP_I2C_CON_REG] = 0x09, [OMAP_I2C_OA_REG] = 0x0a, [OMAP_I2C_SA_REG] = 0x0b, @@ -223,7 +220,6 @@ const static u8 reg_map_ip_v2[] = { [OMAP_I2C_BUF_REG] = 0x94, [OMAP_I2C_CNT_REG] = 0x98, [OMAP_I2C_DATA_REG] = 0x9c, - [OMAP_I2C_SYSC_REG] = 0x20, [OMAP_I2C_CON_REG] = 0xa4, [OMAP_I2C_OA_REG] = 0xa8, [OMAP_I2C_SA_REG] = 0xac, @@ -264,7 +260,6 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev) omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate); omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate); omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate); - omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, dev->syscstate); omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate); omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); } -- 1.7.1
next prev parent reply other threads:[~2011-08-05 6:00 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-08-05 6:00 [PATCHv6 1/3] OMAP: I2C: Reset support Shubhrajyoti D 2011-08-05 6:00 ` Shubhrajyoti D [not found] ` <1312524035-5549-1-git-send-email-shubhrajyoti-l0cyMroinI0@public.gmane.org> 2011-08-05 6:00 ` [PATCHv6 2/3] OMAP: I2C: Remove the reset in the init path Shubhrajyoti D 2011-08-05 6:00 ` Shubhrajyoti D [not found] ` <1312524035-5549-2-git-send-email-shubhrajyoti-l0cyMroinI0@public.gmane.org> 2011-08-26 23:11 ` Kevin Hilman 2011-08-26 23:11 ` Kevin Hilman [not found] ` <87pqjrydih.fsf-l0cyMroinI0@public.gmane.org> 2011-08-29 9:34 ` Shubhrajyoti 2011-08-29 9:34 ` Shubhrajyoti 2011-08-05 6:00 ` Shubhrajyoti D [this message] 2011-08-05 6:00 ` [PATCHv6 3/3] OMAP: I2C: Remove the SYSC register definition Shubhrajyoti D 2011-08-26 23:06 ` [PATCHv6 1/3] OMAP: I2C: Reset support Kevin Hilman 2011-08-26 23:06 ` Kevin Hilman 2011-08-29 9:31 ` Shubhrajyoti 2011-08-29 9:31 ` Shubhrajyoti
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1312524035-5549-3-git-send-email-shubhrajyoti@ti.com \ --to=shubhrajyoti-l0cymroini0@public.gmane.org \ --cc=balajitk-l0cyMroinI0@public.gmane.org \ --cc=khilman-l0cyMroinI0@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=rnayak-l0cyMroinI0@public.gmane.org \ --cc=santosh.shilimkar-l0cyMroinI0@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.