All of lore.kernel.org
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@stericsson.com>
To: Grant Likely <grant.likely@secretlab.ca>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Cc: Lee Jones <lee.jones@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 3/3] gpio/nomadik: use genirq core to track enablement
Date: Tue, 9 Aug 2011 20:04:00 +0200	[thread overview]
Message-ID: <1312913040-7574-1-git-send-email-linus.walleij@stericsson.com> (raw)

From: Linus Walleij <linus.walleij@linaro.org>

Currently the Nomadik GPIO driver tracks enabled/disabled interrupt
status with a local variable, switch to using the interrupt core.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpio/gpio-nomadik.c |   11 ++---------
 1 files changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 97e9be9..0b7ec12 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -58,7 +58,6 @@ struct nmk_gpio_chip {
 	u32 rwimsc;
 	u32 fwimsc;
 	u32 slpm;
-	u32 enabled;
 	u32 pull_up;
 };
 
@@ -605,11 +604,6 @@ static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable)
 	if (!nmk_chip)
 		return -EINVAL;
 
-	if (enable)
-		nmk_chip->enabled |= bitmask;
-	else
-		nmk_chip->enabled &= ~bitmask;
-
 	clk_enable(nmk_chip->clk);
 	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
 	spin_lock(&nmk_chip->lock);
@@ -653,7 +647,7 @@ static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
 	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
 	spin_lock(&nmk_chip->lock);
 
-	if (!(nmk_chip->enabled & bitmask))
+	if (irqd_irq_disabled(d))
 		__nmk_gpio_set_wake(nmk_chip, gpio, on);
 
 	if (on)
@@ -670,7 +664,7 @@ static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
 
 static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 {
-	bool enabled;
+	bool enabled = !irqd_irq_disabled(d);
 	bool wake = irqd_is_wakeup_set(d);
 	int gpio;
 	struct nmk_gpio_chip *nmk_chip;
@@ -691,7 +685,6 @@ static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	clk_enable(nmk_chip->clk);
 	spin_lock_irqsave(&nmk_chip->lock, flags);
 
-	enabled = !!(nmk_chip->enabled & bitmask);
 	if (enabled)
 		__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false);
 
-- 
1.7.3.2


WARNING: multiple messages have this Message-ID (diff)
From: linus.walleij@stericsson.com (Linus Walleij)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] gpio/nomadik: use genirq core to track enablement
Date: Tue, 9 Aug 2011 20:04:00 +0200	[thread overview]
Message-ID: <1312913040-7574-1-git-send-email-linus.walleij@stericsson.com> (raw)

From: Linus Walleij <linus.walleij@linaro.org>

Currently the Nomadik GPIO driver tracks enabled/disabled interrupt
status with a local variable, switch to using the interrupt core.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpio/gpio-nomadik.c |   11 ++---------
 1 files changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 97e9be9..0b7ec12 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -58,7 +58,6 @@ struct nmk_gpio_chip {
 	u32 rwimsc;
 	u32 fwimsc;
 	u32 slpm;
-	u32 enabled;
 	u32 pull_up;
 };
 
@@ -605,11 +604,6 @@ static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable)
 	if (!nmk_chip)
 		return -EINVAL;
 
-	if (enable)
-		nmk_chip->enabled |= bitmask;
-	else
-		nmk_chip->enabled &= ~bitmask;
-
 	clk_enable(nmk_chip->clk);
 	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
 	spin_lock(&nmk_chip->lock);
@@ -653,7 +647,7 @@ static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
 	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
 	spin_lock(&nmk_chip->lock);
 
-	if (!(nmk_chip->enabled & bitmask))
+	if (irqd_irq_disabled(d))
 		__nmk_gpio_set_wake(nmk_chip, gpio, on);
 
 	if (on)
@@ -670,7 +664,7 @@ static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
 
 static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 {
-	bool enabled;
+	bool enabled = !irqd_irq_disabled(d);
 	bool wake = irqd_is_wakeup_set(d);
 	int gpio;
 	struct nmk_gpio_chip *nmk_chip;
@@ -691,7 +685,6 @@ static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	clk_enable(nmk_chip->clk);
 	spin_lock_irqsave(&nmk_chip->lock, flags);
 
-	enabled = !!(nmk_chip->enabled & bitmask);
 	if (enabled)
 		__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false);
 
-- 
1.7.3.2

             reply	other threads:[~2011-08-09 18:04 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-09 18:04 Linus Walleij [this message]
2011-08-09 18:04 ` [PATCH 3/3] gpio/nomadik: use genirq core to track enablement Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1312913040-7574-1-git-send-email-linus.walleij@stericsson.com \
    --to=linus.walleij@stericsson.com \
    --cc=grant.likely@secretlab.ca \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.