From: Deepthy Ravi <deepthy.ravi@ti.com>
To: <linux-omap@vger.kernel.org>
Cc: <tony@atomide.com>, <linux@arm.linux.org.uk>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <mchehab@infradead.org>,
<linux-media@vger.kernel.org>,
<laurent.pinchart@ideasonboard.com>, <g.liakhovetski@gmx.de>,
Vaibhav Hiremath <hvaibhav@ti.com>,
Deepthy Ravi <deepthy.ravi@ti.com>
Subject: [PATCH 1/8] omap3evm: Enable regulators for camera interface
Date: Thu, 8 Sep 2011 19:03:51 +0530 [thread overview]
Message-ID: <1315488831-15998-1-git-send-email-deepthy.ravi@ti.com> (raw)
From: Vaibhav Hiremath <hvaibhav@ti.com>
Enabled 1v8 and 2v8 regulator output, which is being used by
camera module.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Deepthy Ravi <deepthy.ravi@ti.com>
---
arch/arm/mach-omap2/board-omap3evm.c | 40 ++++++++++++++++++++++++++++++++++
1 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index a1184b3..8333ee4 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -273,6 +273,44 @@ static struct omap_dss_board_info omap3_evm_dss_data = {
.default_device = &omap3_evm_lcd_device,
};
+static struct regulator_consumer_supply omap3evm_vaux3_supply = {
+ .supply = "cam_1v8",
+};
+
+static struct regulator_consumer_supply omap3evm_vaux4_supply = {
+ .supply = "cam_2v8",
+};
+
+/* VAUX3 for CAM_1V8 */
+static struct regulator_init_data omap3evm_vaux3 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3evm_vaux3_supply,
+};
+
+/* VAUX4 for CAM_2V8 */
+static struct regulator_init_data omap3evm_vaux4 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3evm_vaux4_supply,
+};
+
static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -499,6 +537,8 @@ static struct twl4030_platform_data omap3evm_twldata = {
.vio = &omap3evm_vio,
.vmmc1 = &omap3evm_vmmc1,
.vsim = &omap3evm_vsim,
+ .vaux3 = &omap3evm_vaux3,
+ .vaux4 = &omap3evm_vaux4,
};
static int __init omap3_evm_i2c_init(void)
--
1.7.0.4
WARNING: multiple messages have this Message-ID (diff)
From: Deepthy Ravi <deepthy.ravi@ti.com>
To: linux-omap@vger.kernel.org
Cc: Deepthy Ravi <deepthy.ravi@ti.com>,
linux@arm.linux.org.uk, tony@atomide.com,
linux-kernel@vger.kernel.org, Vaibhav Hiremath <hvaibhav@ti.com>,
mchehab@infradead.org, laurent.pinchart@ideasonboard.com,
g.liakhovetski@gmx.de, linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: [PATCH 1/8] omap3evm: Enable regulators for camera interface
Date: Thu, 8 Sep 2011 19:03:51 +0530 [thread overview]
Message-ID: <1315488831-15998-1-git-send-email-deepthy.ravi@ti.com> (raw)
From: Vaibhav Hiremath <hvaibhav@ti.com>
Enabled 1v8 and 2v8 regulator output, which is being used by
camera module.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Deepthy Ravi <deepthy.ravi@ti.com>
---
arch/arm/mach-omap2/board-omap3evm.c | 40 ++++++++++++++++++++++++++++++++++
1 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index a1184b3..8333ee4 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -273,6 +273,44 @@ static struct omap_dss_board_info omap3_evm_dss_data = {
.default_device = &omap3_evm_lcd_device,
};
+static struct regulator_consumer_supply omap3evm_vaux3_supply = {
+ .supply = "cam_1v8",
+};
+
+static struct regulator_consumer_supply omap3evm_vaux4_supply = {
+ .supply = "cam_2v8",
+};
+
+/* VAUX3 for CAM_1V8 */
+static struct regulator_init_data omap3evm_vaux3 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3evm_vaux3_supply,
+};
+
+/* VAUX4 for CAM_2V8 */
+static struct regulator_init_data omap3evm_vaux4 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3evm_vaux4_supply,
+};
+
static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -499,6 +537,8 @@ static struct twl4030_platform_data omap3evm_twldata = {
.vio = &omap3evm_vio,
.vmmc1 = &omap3evm_vmmc1,
.vsim = &omap3evm_vsim,
+ .vaux3 = &omap3evm_vaux3,
+ .vaux4 = &omap3evm_vaux4,
};
static int __init omap3_evm_i2c_init(void)
--
1.7.0.4
WARNING: multiple messages have this Message-ID (diff)
From: deepthy.ravi@ti.com (Deepthy Ravi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/8] omap3evm: Enable regulators for camera interface
Date: Thu, 8 Sep 2011 19:03:51 +0530 [thread overview]
Message-ID: <1315488831-15998-1-git-send-email-deepthy.ravi@ti.com> (raw)
From: Vaibhav Hiremath <hvaibhav@ti.com>
Enabled 1v8 and 2v8 regulator output, which is being used by
camera module.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Deepthy Ravi <deepthy.ravi@ti.com>
---
arch/arm/mach-omap2/board-omap3evm.c | 40 ++++++++++++++++++++++++++++++++++
1 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index a1184b3..8333ee4 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -273,6 +273,44 @@ static struct omap_dss_board_info omap3_evm_dss_data = {
.default_device = &omap3_evm_lcd_device,
};
+static struct regulator_consumer_supply omap3evm_vaux3_supply = {
+ .supply = "cam_1v8",
+};
+
+static struct regulator_consumer_supply omap3evm_vaux4_supply = {
+ .supply = "cam_2v8",
+};
+
+/* VAUX3 for CAM_1V8 */
+static struct regulator_init_data omap3evm_vaux3 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3evm_vaux3_supply,
+};
+
+/* VAUX4 for CAM_2V8 */
+static struct regulator_init_data omap3evm_vaux4 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3evm_vaux4_supply,
+};
+
static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -499,6 +537,8 @@ static struct twl4030_platform_data omap3evm_twldata = {
.vio = &omap3evm_vio,
.vmmc1 = &omap3evm_vmmc1,
.vsim = &omap3evm_vsim,
+ .vaux3 = &omap3evm_vaux3,
+ .vaux4 = &omap3evm_vaux4,
};
static int __init omap3_evm_i2c_init(void)
--
1.7.0.4
next reply other threads:[~2011-09-08 13:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-08 13:33 Deepthy Ravi [this message]
2011-09-08 13:33 ` [PATCH 1/8] omap3evm: Enable regulators for camera interface Deepthy Ravi
2011-09-08 13:33 ` Deepthy Ravi
2011-09-08 16:51 ` Laurent Pinchart
2011-09-08 16:51 ` Laurent Pinchart
2011-09-08 16:51 ` Laurent Pinchart
2011-09-13 7:06 ` Ravi, Deepthy
2011-09-13 7:06 ` Ravi, Deepthy
2011-09-13 7:06 ` Ravi, Deepthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1315488831-15998-1-git-send-email-deepthy.ravi@ti.com \
--to=deepthy.ravi@ti.com \
--cc=g.liakhovetski@gmx.de \
--cc=hvaibhav@ti.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mchehab@infradead.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.