From: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
To: kgene.kim@samsung.com
Cc: ben-linux@fluff.org, linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sylwester Nawrocki <sylvester.nawrocki@gmail.com>,
Nelson Castillo <arhuaco@freaks-unidos.net>
Subject: [PATCH 08/10] ARM: S3C24XX: Remove unused GPIO definitions for Openmoko GTA02 board
Date: Sat, 30 Jun 2012 14:09:00 +0200 [thread overview]
Message-ID: <1341058142-30438-9-git-send-email-sylvester.nawrocki@gmail.com> (raw)
In-Reply-To: <1341058142-30438-1-git-send-email-sylvester.nawrocki@gmail.com>
mach-s3c24xx/include/mach/gta02.h header file contains defines
which are now not used anywhere, remove them.
Cc: Nelson Castillo <arhuaco@freaks-unidos.net>
Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
---
arch/arm/mach-s3c24xx/include/mach/gta02.h | 69 ----------------------------
1 files changed, 0 insertions(+), 69 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h
index 3a56a22..2173934 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gta02.h
+++ b/arch/arm/mach-s3c24xx/include/mach/gta02.h
@@ -3,82 +3,13 @@
#include <mach/regs-gpio.h>
-/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
-#define GTA02v1_SYSTEM_REV 0x00000310
-#define GTA02v2_SYSTEM_REV 0x00000320
-#define GTA02v3_SYSTEM_REV 0x00000330
-#define GTA02v4_SYSTEM_REV 0x00000340
-#define GTA02v5_SYSTEM_REV 0x00000350
-/* since A7 is basically same as A6, we use A6 PCB ID */
-#define GTA02v6_SYSTEM_REV 0x00000360
-
-#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */
-
-#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0)
-#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1)
#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
-#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3)
-#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5)
-#define GTA02_GPIO_BT_EN S3C2410_GPB(6)
-#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7)
-#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8)
#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
-
-#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */
-
-#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */
-#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */
-#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */
-
-#define GTA02_GPIO_nG1_INT S3C2410_GPF(0)
-#define GTA02_GPIO_IO1 S3C2410_GPF(1)
-#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4)
-#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */
#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
-
-#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4)
-#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
-#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
-
#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2)
#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4)
-#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5)
-#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7)
-#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8)
-#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8)
-#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10)
-#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */
-#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
-#define GTA02_IRQ_MODEM IRQ_EINT1
-#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */
-#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4
-#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5
-#define GTA02_IRQ_AUX IRQ_EINT6
-#define GTA02_IRQ_nHOLD IRQ_EINT7
#define GTA02_IRQ_PCF50633 IRQ_EINT9
-#define GTA02_IRQ_3D IRQ_EINT12
-#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */
-#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */
-
-/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
-#define GTA02_PCB_ID1_0 S3C2410_GPC(13)
-#define GTA02_PCB_ID1_1 S3C2410_GPC(15)
-#define GTA02_PCB_ID1_2 S3C2410_GPD(0)
-#define GTA02_PCB_ID2_0 S3C2410_GPD(3)
-#define GTA02_PCB_ID2_1 S3C2410_GPD(4)
-
-int gta02_get_pcb_revision(void);
#endif /* _GTA02_H */
--
1.7.4.1
WARNING: multiple messages have this Message-ID (diff)
From: sylvester.nawrocki@gmail.com (Sylwester Nawrocki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/10] ARM: S3C24XX: Remove unused GPIO definitions for Openmoko GTA02 board
Date: Sat, 30 Jun 2012 14:09:00 +0200 [thread overview]
Message-ID: <1341058142-30438-9-git-send-email-sylvester.nawrocki@gmail.com> (raw)
In-Reply-To: <1341058142-30438-1-git-send-email-sylvester.nawrocki@gmail.com>
mach-s3c24xx/include/mach/gta02.h header file contains defines
which are now not used anywhere, remove them.
Cc: Nelson Castillo <arhuaco@freaks-unidos.net>
Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
---
arch/arm/mach-s3c24xx/include/mach/gta02.h | 69 ----------------------------
1 files changed, 0 insertions(+), 69 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h
index 3a56a22..2173934 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gta02.h
+++ b/arch/arm/mach-s3c24xx/include/mach/gta02.h
@@ -3,82 +3,13 @@
#include <mach/regs-gpio.h>
-/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
-#define GTA02v1_SYSTEM_REV 0x00000310
-#define GTA02v2_SYSTEM_REV 0x00000320
-#define GTA02v3_SYSTEM_REV 0x00000330
-#define GTA02v4_SYSTEM_REV 0x00000340
-#define GTA02v5_SYSTEM_REV 0x00000350
-/* since A7 is basically same as A6, we use A6 PCB ID */
-#define GTA02v6_SYSTEM_REV 0x00000360
-
-#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */
-
-#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0)
-#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1)
#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
-#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3)
-#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5)
-#define GTA02_GPIO_BT_EN S3C2410_GPB(6)
-#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7)
-#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8)
#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
-
-#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */
-
-#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */
-#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */
-#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */
-
-#define GTA02_GPIO_nG1_INT S3C2410_GPF(0)
-#define GTA02_GPIO_IO1 S3C2410_GPF(1)
-#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4)
-#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */
#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
-
-#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4)
-#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
-#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
-
#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2)
#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4)
-#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5)
-#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7)
-#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8)
-#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8)
-#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10)
-#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */
-#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
-#define GTA02_IRQ_MODEM IRQ_EINT1
-#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */
-#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4
-#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5
-#define GTA02_IRQ_AUX IRQ_EINT6
-#define GTA02_IRQ_nHOLD IRQ_EINT7
#define GTA02_IRQ_PCF50633 IRQ_EINT9
-#define GTA02_IRQ_3D IRQ_EINT12
-#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */
-#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */
-
-/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
-#define GTA02_PCB_ID1_0 S3C2410_GPC(13)
-#define GTA02_PCB_ID1_1 S3C2410_GPC(15)
-#define GTA02_PCB_ID1_2 S3C2410_GPD(0)
-#define GTA02_PCB_ID2_0 S3C2410_GPD(3)
-#define GTA02_PCB_ID2_1 S3C2410_GPD(4)
-
-int gta02_get_pcb_revision(void);
#endif /* _GTA02_H */
--
1.7.4.1
next prev parent reply other threads:[~2012-06-30 12:09 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-30 12:08 [PATCH 00/10] ARM: S3C24XX gpio cleanups and fixes Sylwester Nawrocki
2012-06-30 12:08 ` Sylwester Nawrocki
2012-06-30 12:08 ` [PATCH 01/10] ARM: S3C24XX: Free the backlight gpio requested in Mini2440 board code Sylwester Nawrocki
2012-06-30 12:08 ` Sylwester Nawrocki
2012-07-01 17:36 ` Juergen Beisert
2012-07-01 17:36 ` Juergen Beisert
2012-06-30 12:08 ` [PATCH 02/10] ARM: S3C24XX: Convert SMDK board file to the gpiolib API Sylwester Nawrocki
2012-06-30 12:08 ` Sylwester Nawrocki
2012-06-30 12:08 ` [PATCH 03/10] ARM: S3C24XX: Convert QT2410 " Sylwester Nawrocki
2012-06-30 12:08 ` Sylwester Nawrocki
2012-07-01 5:46 ` Harald Welte
2012-07-01 5:46 ` Harald Welte
2012-06-30 12:08 ` [PATCH 04/10] ARM: S3C24XX: Convert the PM code to " Sylwester Nawrocki
2012-06-30 12:08 ` Sylwester Nawrocki
2012-06-30 12:08 ` [PATCH 05/10] ARM: S3C24XX: Convert the touchscreen setup code to common GPIO API Sylwester Nawrocki
2012-06-30 12:08 ` Sylwester Nawrocki
2012-06-30 12:08 ` [PATCH 06/10] ARM: S3C24XX: Remove unused GPA, GPE, GPH bank GPIO aliases Sylwester Nawrocki
2012-06-30 12:08 ` Sylwester Nawrocki
2012-06-30 12:08 ` [PATCH 07/10] ARM: S3C24XX: Remove unused GPIO definitions for port J Sylwester Nawrocki
2012-06-30 12:08 ` Sylwester Nawrocki
2012-06-30 12:09 ` Sylwester Nawrocki [this message]
2012-06-30 12:09 ` [PATCH 08/10] ARM: S3C24XX: Remove unused GPIO definitions for Openmoko GTA02 board Sylwester Nawrocki
2012-06-30 12:09 ` [PATCH 09/10] ARM: S3C24XX: Correct AC97 clock control bit for S3C2440 Sylwester Nawrocki
2012-06-30 12:09 ` Sylwester Nawrocki
2012-06-30 12:09 ` [PATCH 10/10] ARM: S3C24XX: Correct CAMIF interrupt definitions Sylwester Nawrocki
2012-06-30 12:09 ` Sylwester Nawrocki
2012-07-12 9:19 ` [PATCH 00/10] ARM: S3C24XX gpio cleanups and fixes Kukjin Kim
2012-07-12 9:19 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341058142-30438-9-git-send-email-sylvester.nawrocki@gmail.com \
--to=sylvester.nawrocki@gmail.com \
--cc=arhuaco@freaks-unidos.net \
--cc=ben-linux@fluff.org \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.