All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 1/2] drm/i915: introduce crtc->dspaddr_offset
Date: Thu,  5 Jul 2012 12:17:29 +0200	[thread overview]
Message-ID: <1341483450-6385-1-git-send-email-daniel.vetter@ffwll.ch> (raw)

To avoid recomputing the display framebuffer offset on gen2/3
pageflips. This is also prep work to do similar trickery on gen4+

Also:
- kill "Start", such upper-case remnants from the ddx must surely die.
- rename "Offset" to linear_offset, to make it clearer that on gen4+
  this is only used by the hw for linear buffers, for tiled buffers it
  uses the TILEOFF register.
- call DSAPADDR DSPLINOFF on gen4+ for the same reason (and because
  the documentation really renamed the register).

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_reg.h      |    1 +
 drivers/gpu/drm/i915/intel_display.c |   46 ++++++++++++++++------------------
 drivers/gpu/drm/i915/intel_drv.h     |    5 ++++
 3 files changed, 27 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 48d5e8e..871bedc 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2897,6 +2897,7 @@
 #define DSPSIZE(plane) _PIPE(plane, _DSPASIZE, _DSPBSIZE)
 #define DSPSURF(plane) _PIPE(plane, _DSPASURF, _DSPBSURF)
 #define DSPTILEOFF(plane) _PIPE(plane, _DSPATILEOFF, _DSPBTILEOFF)
+#define DSPLINOFF(plane) DSPADDR(plane)
 
 /* Display/Sprite base address macros */
 #define DISP_BASEADDR_MASK	(0xfffff000)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a8538ac..839633c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1833,7 +1833,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 	struct intel_framebuffer *intel_fb;
 	struct drm_i915_gem_object *obj;
 	int plane = intel_crtc->plane;
-	unsigned long Start, Offset;
+	unsigned long linear_offset;
 	u32 dspcntr;
 	u32 reg;
 
@@ -1880,18 +1880,22 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 
 	I915_WRITE(reg, dspcntr);
 
-	Start = obj->gtt_offset;
-	Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
+	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
 
-	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
-		      Start, Offset, x, y, fb->pitches[0]);
+	if (INTEL_INFO(dev)->gen >= 4)
+		intel_crtc->dspaddr_offset = 0;
+	else
+		intel_crtc->dspaddr_offset = linear_offset;
+
+	DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
+		      obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
 	I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
 	if (INTEL_INFO(dev)->gen >= 4) {
-		I915_MODIFY_DISPBASE(DSPSURF(plane), Start);
+		I915_MODIFY_DISPBASE(DSPSURF(plane), obj->gtt_offset);
 		I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
-		I915_WRITE(DSPADDR(plane), Offset);
+		I915_WRITE(DSPLINOFF(plane), linear_offset);
 	} else
-		I915_WRITE(DSPADDR(plane), Start + Offset);
+		I915_WRITE(DSPADDR(plane), obj->gtt_offset + linear_offset);
 	POSTING_READ(reg);
 
 	return 0;
@@ -1906,7 +1910,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
 	struct intel_framebuffer *intel_fb;
 	struct drm_i915_gem_object *obj;
 	int plane = intel_crtc->plane;
-	unsigned long Start, Offset;
+	unsigned long linear_offset;
 	u32 dspcntr;
 	u32 reg;
 
@@ -1961,15 +1965,15 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
 
 	I915_WRITE(reg, dspcntr);
 
-	Start = obj->gtt_offset;
-	Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
+	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
+	intel_crtc->dspaddr_offset = 0;
 
-	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
-		      Start, Offset, x, y, fb->pitches[0]);
+	DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
+		      obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
 	I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
-	I915_MODIFY_DISPBASE(DSPSURF(plane), Start);
+	I915_MODIFY_DISPBASE(DSPSURF(plane), obj->gtt_offset);
 	I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
-	I915_WRITE(DSPADDR(plane), Offset);
+	I915_WRITE(DSPLINOFF(plane), linear_offset);
 	POSTING_READ(reg);
 
 	return 0;
@@ -5975,7 +5979,6 @@ static int intel_gen2_queue_flip(struct drm_device *dev,
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	unsigned long offset;
 	u32 flip_mask;
 	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	int ret;
@@ -5984,9 +5987,6 @@ static int intel_gen2_queue_flip(struct drm_device *dev,
 	if (ret)
 		goto err;
 
-	/* Offset into the new buffer for cases of shared fbs between CRTCs */
-	offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
-
 	ret = intel_ring_begin(ring, 6);
 	if (ret)
 		goto err_unpin;
@@ -6003,7 +6003,7 @@ static int intel_gen2_queue_flip(struct drm_device *dev,
 	intel_ring_emit(ring, MI_DISPLAY_FLIP |
 			MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
 	intel_ring_emit(ring, fb->pitches[0]);
-	intel_ring_emit(ring, obj->gtt_offset + offset);
+	intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
 	intel_ring_emit(ring, 0); /* aux display base address, unused */
 	intel_ring_advance(ring);
 	return 0;
@@ -6021,7 +6021,6 @@ static int intel_gen3_queue_flip(struct drm_device *dev,
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	unsigned long offset;
 	u32 flip_mask;
 	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
 	int ret;
@@ -6030,9 +6029,6 @@ static int intel_gen3_queue_flip(struct drm_device *dev,
 	if (ret)
 		goto err;
 
-	/* Offset into the new buffer for cases of shared fbs between CRTCs */
-	offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
-
 	ret = intel_ring_begin(ring, 6);
 	if (ret)
 		goto err_unpin;
@@ -6046,7 +6042,7 @@ static int intel_gen3_queue_flip(struct drm_device *dev,
 	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
 			MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
 	intel_ring_emit(ring, fb->pitches[0]);
-	intel_ring_emit(ring, obj->gtt_offset + offset);
+	intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
 	intel_ring_emit(ring, MI_NOOP);
 
 	intel_ring_advance(ring);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 3e09188..9010e91 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -176,6 +176,11 @@ struct intel_crtc {
 	struct intel_unpin_work *unpin_work;
 	int fdi_lanes;
 
+	/* Display surface base address adjustement for pageflips. Note that on
+	 * gen4+ this only adjusts up to a tile, offsets within a tile are
+	 * handled in the hw itself (with the TILEOFF register). */
+	unsigned long dspaddr_offset;
+
 	struct drm_i915_gem_object *cursor_bo;
 	uint32_t cursor_addr;
 	int16_t cursor_x, cursor_y;
-- 
1.7.10.2

             reply	other threads:[~2012-07-05 10:17 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-05 10:17 Daniel Vetter [this message]
2012-07-05 10:17 ` [PATCH 2/2] drm/i915: adjust framebuffer base address on gen4+ Daniel Vetter
2012-07-05 10:29   ` Chris Wilson
2012-07-05 11:38     ` Daniel Vetter
2012-07-05 10:37   ` Chris Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1341483450-6385-1-git-send-email-daniel.vetter@ffwll.ch \
    --to=daniel.vetter@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.