[PATCH 56/81] drm/i915: push crtc->fb update into pipe_set_base

[Daniel Vetter <daniel.vetter@ffwll.ch>]

Passing in the old fb, having overwritten the current fb, leads to
some neatly convoluted code. It's much simpler if we defer the
crtc->fb update to the place that updates the hw, in pipe_set_base.
This way we also don't need to restore anything in case something
fails - we only update crtc->fb once things have succeeded.

The real reason for this change is that now we keep the old fb
assigned to crtc->fb, which allows us to finally move the crtc disable
case into the common low-level set_mode function in the next patch.

Also don't clobber crtc->x and crtc->y, we neatly pass these down the
callchain already. Unfortunately we can't do the same with crtc->mode,
because that one is being used in the mode_set callbacks.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c |   84 ++++++++++++++--------------------
 1 files changed, 34 insertions(+), 50 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c5bf814..19ef083 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2198,16 +2198,17 @@ intel_finish_fb(struct drm_framebuffer *old_fb)
 
 static int
 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
-		    struct drm_framebuffer *old_fb)
+		    struct drm_framebuffer *fb)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_master_private *master_priv;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_framebuffer *old_fb;
 	int ret;
 
 	/* no fb bound */
-	if (!crtc->fb) {
+	if (!fb) {
 		DRM_ERROR("No FB bound\n");
 		return 0;
 	}
@@ -2221,7 +2222,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 
 	mutex_lock(&dev->struct_mutex);
 	ret = intel_pin_and_fence_fb_obj(dev,
-					 to_intel_framebuffer(crtc->fb)->obj,
+					 to_intel_framebuffer(fb)->obj,
 					 NULL);
 	if (ret != 0) {
 		mutex_unlock(&dev->struct_mutex);
@@ -2229,17 +2230,20 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		return ret;
 	}
 
-	if (old_fb)
-		intel_finish_fb(old_fb);
+	if (crtc->fb)
+		intel_finish_fb(crtc->fb);
 
-	ret = dev_priv->display.update_plane(crtc, crtc->fb, x, y);
+	ret = dev_priv->display.update_plane(crtc, fb, x, y);
 	if (ret) {
-		intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
+		intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj);
 		mutex_unlock(&dev->struct_mutex);
 		DRM_ERROR("failed to update base address\n");
 		return ret;
 	}
 
+	old_fb = crtc->fb;
+	crtc->fb = fb;
+
 	if (old_fb) {
 		intel_wait_for_vblank(dev, intel_crtc->pipe);
 		intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
@@ -3765,6 +3769,7 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
  * true if they don't match).
  */
 static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
+					 struct drm_framebuffer *fb,
 					 unsigned int *pipe_bpp,
 					 struct drm_display_mode *mode)
 {
@@ -3845,7 +3850,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
 	 * also stays within the max display bpc discovered above.
 	 */
 
-	switch (crtc->fb->depth) {
+	switch (fb->depth) {
 	case 8:
 		bpc = 8; /* since we go through a colormap */
 		break;
@@ -4264,7 +4269,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 			      struct drm_display_mode *mode,
 			      struct drm_display_mode *adjusted_mode,
 			      int x, int y,
-			      struct drm_framebuffer *old_fb)
+			      struct drm_framebuffer *fb)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4454,7 +4459,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 	I915_WRITE(DSPCNTR(plane), dspcntr);
 	POSTING_READ(DSPCNTR(plane));
 
-	ret = intel_pipe_set_base(crtc, x, y, old_fb);
+	ret = intel_pipe_set_base(crtc, x, y, fb);
 
 	intel_update_watermarks(dev);
 
@@ -4612,7 +4617,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 				  struct drm_display_mode *mode,
 				  struct drm_display_mode *adjusted_mode,
 				  int x, int y,
-				  struct drm_framebuffer *old_fb)
+				  struct drm_framebuffer *fb)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4732,7 +4737,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	/* determine panel color depth */
 	temp = I915_READ(PIPECONF(pipe));
 	temp &= ~PIPE_BPC_MASK;
-	dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode);
+	dither = intel_choose_pipe_bpp_dither(crtc, fb, &pipe_bpp, mode);
 	switch (pipe_bpp) {
 	case 18:
 		temp |= PIPE_6BPC;
@@ -5001,7 +5006,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	I915_WRITE(DSPCNTR(plane), dspcntr);
 	POSTING_READ(DSPCNTR(plane));
 
-	ret = intel_pipe_set_base(crtc, x, y, old_fb);
+	ret = intel_pipe_set_base(crtc, x, y, fb);
 
 	intel_update_watermarks(dev);
 
@@ -5014,7 +5019,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			       struct drm_display_mode *mode,
 			       struct drm_display_mode *adjusted_mode,
 			       int x, int y,
-			       struct drm_framebuffer *old_fb)
+			       struct drm_framebuffer *fb)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5025,7 +5030,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	drm_vblank_pre_modeset(dev, pipe);
 
 	ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
-					      x, y, old_fb);
+					      x, y, fb);
 	drm_vblank_post_modeset(dev, pipe);
 
 	return ret;
@@ -5635,7 +5640,7 @@ bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
 	struct drm_encoder *encoder = &intel_encoder->base;
 	struct drm_crtc *crtc = NULL;
 	struct drm_device *dev = encoder->dev;
-	struct drm_framebuffer *old_fb;
+	struct drm_framebuffer *fb;
 	int i = -1;
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
@@ -5696,8 +5701,6 @@ bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
 	if (!mode)
 		mode = &load_detect_mode;
 
-	old_fb = crtc->fb;
-
 	/* We need a framebuffer large enough to accommodate all accesses
 	 * that the plane may generate whilst we perform load detection.
 	 * We can not rely on the fbcon either being present (we get called
@@ -5705,19 +5708,19 @@ bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
 	 * not even exist) or that it is large enough to satisfy the
 	 * requested mode.
 	 */
-	crtc->fb = mode_fits_in_fbdev(dev, mode);
-	if (crtc->fb == NULL) {
+	fb = mode_fits_in_fbdev(dev, mode);
+	if (fb == NULL) {
 		DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
-		crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
-		old->release_fb = crtc->fb;
+		fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
+		old->release_fb = fb;
 	} else
 		DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
-	if (IS_ERR(crtc->fb)) {
+	if (IS_ERR(fb)) {
 		DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
 		goto fail;
 	}
 
-	if (!intel_crtc_set_mode(crtc, mode, 0, 0, old_fb)) {
+	if (!intel_crtc_set_mode(crtc, mode, 0, 0, fb)) {
 		DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
 		if (old->release_fb)
 			old->release_fb->funcs->destroy(old->release_fb);
@@ -5731,7 +5734,6 @@ bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
 fail:
 	connector->encoder = NULL;
 	encoder->crtc = NULL;
-	crtc->fb = old_fb;
 	return false;
 }
 
@@ -6667,13 +6669,12 @@ static void intel_modeset_commit_output_state(struct drm_device *dev)
 bool intel_crtc_set_mode(struct drm_crtc *crtc,
 			 struct drm_display_mode *mode,
 			 int x, int y,
-			 struct drm_framebuffer *old_fb)
+			 struct drm_framebuffer *fb)
 {
 	struct drm_device *dev = crtc->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode;
 	struct drm_encoder_helper_funcs *encoder_funcs;
-	int saved_x, saved_y;
 	struct drm_encoder *encoder;
 	bool ret = true;
 
@@ -6687,15 +6688,11 @@ bool intel_crtc_set_mode(struct drm_crtc *crtc,
 
 	saved_hwmode = crtc->hwmode;
 	saved_mode = crtc->mode;
-	saved_x = crtc->x;
-	saved_y = crtc->y;
 
 	/* Update crtc values up front so the driver can rely on them for mode
 	 * setting.
 	 */
 	crtc->mode = *mode;
-	crtc->x = x;
-	crtc->y = y;
 
 	/* Pass our mode to the connectors and the CRTC to give them a chance to
 	 * adjust it according to limitations or connector properties, and also
@@ -6726,7 +6723,7 @@ bool intel_crtc_set_mode(struct drm_crtc *crtc,
 	/* Set up the DPLL and any encoders state that needs to adjust or depend
 	 * on the DPLL.
 	 */
-	ret = !intel_crtc_mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+	ret = !intel_crtc_mode_set(crtc, mode, adjusted_mode, x, y, fb);
 	if (!ret)
 	    goto done;
 
@@ -6742,6 +6739,9 @@ bool intel_crtc_set_mode(struct drm_crtc *crtc,
 		encoder_funcs->mode_set(encoder, mode, adjusted_mode);
 	}
 
+	crtc->x = x;
+	crtc->y = y;
+
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
 	dev_priv->display.crtc_enable(crtc);
 
@@ -6760,8 +6760,6 @@ done:
 	if (!ret) {
 		crtc->hwmode = saved_hwmode;
 		crtc->mode = saved_mode;
-		crtc->x = saved_x;
-		crtc->y = saved_y;
 	}
 
 	return ret;
@@ -6990,7 +6988,6 @@ next_encoder:
 static int intel_crtc_set_config(struct drm_mode_set *set)
 {
 	struct drm_device *dev;
-	struct drm_framebuffer *old_fb = NULL;
 	struct drm_mode_set save_set;
 	struct intel_set_config *config;
 	int ret;
@@ -7053,14 +7050,11 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 			DRM_DEBUG_KMS("attempting to set mode from"
 					" userspace\n");
 			drm_mode_debug_printmodeline(set->mode);
-			old_fb = set->crtc->fb;
-			set->crtc->fb = set->fb;
 			if (!intel_crtc_set_mode(set->crtc, set->mode,
 						      set->x, set->y,
-						      old_fb)) {
+						      set->fb)) {
 				DRM_ERROR("failed to set mode on [CRTC:%d]\n",
 					  set->crtc->base.id);
-				set->crtc->fb = old_fb;
 				ret = -EINVAL;
 				goto fail;
 			}
@@ -7073,18 +7067,8 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 		}
 		drm_helper_disable_unused_functions(dev);
 	} else if (config->fb_changed) {
-		set->crtc->x = set->x;
-		set->crtc->y = set->y;
-
-		old_fb = set->crtc->fb;
-		if (set->crtc->fb != set->fb)
-			set->crtc->fb = set->fb;
 		ret = intel_pipe_set_base(set->crtc,
-					  set->x, set->y, old_fb);
-		if (ret != 0) {
-			set->crtc->fb = old_fb;
-			goto fail;
-		}
+					  set->x, set->y, set->fb);
 	}
 
 	intel_set_config_free(config);
-- 
1.7.7.6