All of lore.kernel.org
 help / color / mirror / Atom feed
From: AnilKumar Ch <anilkumar@ti.com>
To: linux-omap@vger.kernel.org
Cc: tony@atomide.com, b-cousson@ti.com,
	linux-arm-kernel@lists.infradead.org,
	devicetree-discuss@lists.ozlabs.org, grant.likely@secretlab.ca,
	AnilKumar Ch <anilkumar@ti.com>
Subject: [PATCH v3 2/2] arm/dts: Configure pinmuxs for user leds control on Bone
Date: Tue, 24 Jul 2012 21:15:19 +0530	[thread overview]
Message-ID: <1343144719-26352-3-git-send-email-anilkumar@ti.com> (raw)
In-Reply-To: <1343144719-26352-1-git-send-email-anilkumar@ti.com>

Adds GPIO pinctrl nodes to am3358_pinmux master node to control
user leds (USR0, USR1, USR2 and USR3) present on BeagleBone.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
 arch/arm/boot/dts/am335x-bone.dts |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 8fdf43a..b0c98cd 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -46,3 +46,18 @@
 	regulator-boot-on;
 	regulator-always-on;
 };
+
+&am3358_pinmux {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&userled_pins>;
+
+	userled_pins: pinmux_userled_pins {
+		pinctrl-single,pins = <
+			0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+			0x58 0x17	/* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+			0x5C 0x7	/* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+			0x60 0x17	/* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+		>;
+	};
+};
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: anilkumar@ti.com (AnilKumar Ch)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/2] arm/dts: Configure pinmuxs for user leds control on Bone
Date: Tue, 24 Jul 2012 21:15:19 +0530	[thread overview]
Message-ID: <1343144719-26352-3-git-send-email-anilkumar@ti.com> (raw)
In-Reply-To: <1343144719-26352-1-git-send-email-anilkumar@ti.com>

Adds GPIO pinctrl nodes to am3358_pinmux master node to control
user leds (USR0, USR1, USR2 and USR3) present on BeagleBone.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
 arch/arm/boot/dts/am335x-bone.dts |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 8fdf43a..b0c98cd 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -46,3 +46,18 @@
 	regulator-boot-on;
 	regulator-always-on;
 };
+
+&am3358_pinmux {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&userled_pins>;
+
+	userled_pins: pinmux_userled_pins {
+		pinctrl-single,pins = <
+			0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+			0x58 0x17	/* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+			0x5C 0x7	/* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+			0x60 0x17	/* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+		>;
+	};
+};
-- 
1.7.9.5

  parent reply	other threads:[~2012-07-24 15:45 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-24 15:45 [PATCH v3 0/2] Add pinctrl support to AM33XX family of devices AnilKumar Ch
2012-07-24 15:45 ` AnilKumar Ch
2012-07-24 15:45 ` [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support AnilKumar Ch
2012-07-24 15:45   ` AnilKumar Ch
2012-07-27  9:10   ` Peter Ujfalusi
2012-07-27  9:10     ` Peter Ujfalusi
2012-07-31 13:37     ` AnilKumar, Chimata
2012-07-31 13:37       ` AnilKumar, Chimata
2012-08-07  7:43       ` Tony Lindgren
2012-08-07  7:43         ` Tony Lindgren
2012-08-07  8:50         ` AnilKumar, Chimata
2012-08-07  8:50           ` AnilKumar, Chimata
2012-08-08 12:05       ` Peter Ujfalusi
2012-08-08 12:05         ` Peter Ujfalusi
2012-08-13  4:33         ` AnilKumar, Chimata
2012-08-13  4:33           ` AnilKumar, Chimata
2012-07-24 15:45 ` AnilKumar Ch [this message]
2012-07-24 15:45   ` [PATCH v3 2/2] arm/dts: Configure pinmuxs for user leds control on Bone AnilKumar Ch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1343144719-26352-3-git-send-email-anilkumar@ti.com \
    --to=anilkumar@ti.com \
    --cc=b-cousson@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.