From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> To: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Russell King <linux@arm.linux.org.uk>, Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Rabeeh Khoury <rabeeh@solid-run.com>, Ian Molton <ian.molton@codethink.co.uk>, Maen Suleiman <maen@marvell.com>, Olof Johansson <olof@lixom.net> Subject: [PATCH v3 6/6] ARM: dove: SolidRun CuBox DT Date: Wed, 15 Aug 2012 19:07:35 +0200 [thread overview] Message-ID: <1345050455-32643-7-git-send-email-sebastian.hesselbarth@gmail.com> (raw) In-Reply-To: <1345050455-32643-1-git-send-email-sebastian.hesselbarth@gmail.com> This patch adds basic support for the SolidRun CuBox to DT based mach-dove. There are still some issues related to ongoing orion/mvebu development, e.g. gpio-led will not work as there is no DT pinctrl for dove yet and we don't have board specific setup code. Nevertheless, the DT description is already introduced here. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Ian Molton <ian.molton@codethink.co.uk> Cc: Maen Suleiman <maen@marvell.com> Cc: Olof Johansson <olof@lixom.net> --- arch/arm/boot/dts/dove-cubox.dts | 42 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-dove/Makefile.boot | 1 + 2 files changed, 43 insertions(+) create mode 100644 arch/arm/boot/dts/dove-cubox.dts diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts new file mode 100644 index 0000000..0adbd5a --- /dev/null +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -0,0 +1,42 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "SolidRun CuBox"; + compatible = "solidrun,cubox", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpio0 18 1>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&uart0 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&i2c0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot index 94ab6b3..cfac9c5 100644 --- a/arch/arm/mach-dove/Makefile.boot +++ b/arch/arm/mach-dove/Makefile.boot @@ -4,3 +4,4 @@ initrd_phys-y := 0x00800000 dtb-$(CONFIG_MACH_DOVE_DT) += dove-dove-db.dtb dtb-$(CONFIG_MACH_DOVE_DT) += dove-cm-a510.dtb +dtb-$(CONFIG_MACH_DOVE_DT) += dove-cubox.dtb -- 1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 6/6] ARM: dove: SolidRun CuBox DT Date: Wed, 15 Aug 2012 19:07:35 +0200 [thread overview] Message-ID: <1345050455-32643-7-git-send-email-sebastian.hesselbarth@gmail.com> (raw) In-Reply-To: <1345050455-32643-1-git-send-email-sebastian.hesselbarth@gmail.com> This patch adds basic support for the SolidRun CuBox to DT based mach-dove. There are still some issues related to ongoing orion/mvebu development, e.g. gpio-led will not work as there is no DT pinctrl for dove yet and we don't have board specific setup code. Nevertheless, the DT description is already introduced here. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: linux-arm-kernel at lists.infradead.org Cc: linux-kernel at vger.kernel.org Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Ian Molton <ian.molton@codethink.co.uk> Cc: Maen Suleiman <maen@marvell.com> Cc: Olof Johansson <olof@lixom.net> --- arch/arm/boot/dts/dove-cubox.dts | 42 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-dove/Makefile.boot | 1 + 2 files changed, 43 insertions(+) create mode 100644 arch/arm/boot/dts/dove-cubox.dts diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts new file mode 100644 index 0000000..0adbd5a --- /dev/null +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -0,0 +1,42 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "SolidRun CuBox"; + compatible = "solidrun,cubox", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpio0 18 1>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&uart0 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&i2c0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash at 0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot index 94ab6b3..cfac9c5 100644 --- a/arch/arm/mach-dove/Makefile.boot +++ b/arch/arm/mach-dove/Makefile.boot @@ -4,3 +4,4 @@ initrd_phys-y := 0x00800000 dtb-$(CONFIG_MACH_DOVE_DT) += dove-dove-db.dtb dtb-$(CONFIG_MACH_DOVE_DT) += dove-cm-a510.dtb +dtb-$(CONFIG_MACH_DOVE_DT) += dove-cubox.dtb -- 1.7.10.4
next prev parent reply other threads:[~2012-08-15 17:08 UTC|newest] Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-08-06 12:23 [PATCH 0/6] ARM: dove: DT support for Marvell Dove Sebastian Hesselbarth 2012-08-06 12:23 ` Sebastian Hesselbarth 2012-08-06 12:23 ` [PATCH 1/6] ARM: dove: unify clock setup Sebastian Hesselbarth 2012-08-06 12:23 ` Sebastian Hesselbarth 2012-08-11 9:12 ` Andrew Lunn 2012-08-11 9:12 ` Andrew Lunn 2012-08-11 9:38 ` Sebastian Hesselbarth 2012-08-11 9:38 ` Sebastian Hesselbarth 2012-08-06 12:23 ` [PATCH 2/6] ARM: dove: add clock gating control Sebastian Hesselbarth 2012-08-06 12:23 ` Sebastian Hesselbarth 2012-08-06 12:23 ` [PATCH 3/6] ARM: dove: add crypto engine Sebastian Hesselbarth 2012-08-06 12:23 ` Sebastian Hesselbarth 2012-08-06 12:23 ` [PATCH 4/6] ARM: dove: add device tree based machine descriptor Sebastian Hesselbarth 2012-08-06 12:23 ` Sebastian Hesselbarth 2012-08-06 12:23 ` [PATCH 5/6] ARM: dove: add device tree descriptors Sebastian Hesselbarth 2012-08-06 12:23 ` Sebastian Hesselbarth 2012-08-06 12:23 ` [PATCH 6/6] ARM: dove: SolidRun CuBox DT Sebastian Hesselbarth 2012-08-06 12:23 ` Sebastian Hesselbarth 2012-08-06 14:02 ` [PATCH 0/6] ARM: dove: DT support for Marvell Dove Arnd Bergmann 2012-08-06 14:02 ` Arnd Bergmann 2012-08-06 14:16 ` Sebastian Hesselbarth 2012-08-06 14:16 ` Sebastian Hesselbarth 2012-08-06 14:23 ` Arnd Bergmann 2012-08-06 14:23 ` Arnd Bergmann 2012-08-07 16:53 ` Russell King - ARM Linux 2012-08-07 16:53 ` Russell King - ARM Linux 2012-08-07 19:32 ` Sebastian Hesselbarth 2012-08-07 19:32 ` Sebastian Hesselbarth 2012-08-11 10:35 ` [PATCH v2 " Sebastian Hesselbarth 2012-08-11 10:35 ` Sebastian Hesselbarth 2012-08-11 10:35 ` [PATCH v2 1/6] ARM: dove: unify clock setup Sebastian Hesselbarth 2012-08-11 10:35 ` Sebastian Hesselbarth 2012-08-11 10:35 ` [PATCH v2 2/6] ARM: dove: add clock gating control Sebastian Hesselbarth 2012-08-11 10:35 ` Sebastian Hesselbarth 2012-08-12 15:22 ` Andrew Lunn 2012-08-12 15:22 ` Andrew Lunn 2012-08-11 10:35 ` [PATCH v2 3/6] ARM: dove: add crypto engine Sebastian Hesselbarth 2012-08-11 10:35 ` Sebastian Hesselbarth 2012-08-11 10:35 ` [PATCH v2 4/6] ARM: dove: add device tree based machine descriptor Sebastian Hesselbarth 2012-08-11 10:35 ` Sebastian Hesselbarth 2012-08-11 10:35 ` [PATCH v2 5/6] ARM: dove: add device tree descriptors Sebastian Hesselbarth 2012-08-11 10:35 ` Sebastian Hesselbarth 2012-08-11 10:35 ` [PATCH v2 6/6] ARM: dove: SolidRun CuBox DT Sebastian Hesselbarth 2012-08-11 10:35 ` Sebastian Hesselbarth 2012-08-15 17:07 ` [PATCH v3 0/6] ARM: dove: DT support for Marvell Dove Sebastian Hesselbarth 2012-08-15 17:07 ` Sebastian Hesselbarth 2012-08-15 17:07 ` [PATCH v3 1/6] ARM: dove: unify clock setup Sebastian Hesselbarth 2012-08-15 17:07 ` Sebastian Hesselbarth 2012-08-15 17:07 ` [PATCH v3 2/6] ARM: dove: add clock gating control Sebastian Hesselbarth 2012-08-15 17:07 ` Sebastian Hesselbarth 2012-08-15 17:07 ` [PATCH v3 3/6] ARM: dove: add crypto engine Sebastian Hesselbarth 2012-08-15 17:07 ` Sebastian Hesselbarth 2012-08-15 17:07 ` [PATCH v3 4/6] ARM: dove: add device tree based machine descriptor Sebastian Hesselbarth 2012-08-15 17:07 ` Sebastian Hesselbarth 2012-08-15 17:07 ` [PATCH v3 5/6] ARM: dove: add device tree descriptors Sebastian Hesselbarth 2012-08-15 17:07 ` Sebastian Hesselbarth 2012-08-15 17:07 ` Sebastian Hesselbarth [this message] 2012-08-15 17:07 ` [PATCH v3 6/6] ARM: dove: SolidRun CuBox DT Sebastian Hesselbarth 2012-09-10 2:41 ` [PATCH v3 0/6] ARM: dove: DT support for Marvell Dove Jason Cooper 2012-09-10 2:41 ` Jason Cooper
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1345050455-32643-7-git-send-email-sebastian.hesselbarth@gmail.com \ --to=sebastian.hesselbarth@gmail.com \ --cc=andrew@lunn.ch \ --cc=ian.molton@codethink.co.uk \ --cc=jason@lakedaemon.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=maen@marvell.com \ --cc=olof@lixom.net \ --cc=rabeeh@solid-run.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.