From: Wei Ni <wni@nvidia.com>
To: <swarren@wwwdotorg.org>, <brudley@broadcom.com>, <rvossen@broadcom.com>
Cc: <krakesh@nvidia.com>, <ldewangan@nvidia.com>,
<linux-tegra@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-wireless@vger.kernel.org>,
<brcm80211-dev-list@broadcom.com>, Wei Ni <wni@nvidia.com>
Subject: [PATCH 4/6] ARM: dt: t20 ventana: set pinmux and power for wlan
Date: Mon, 27 Aug 2012 18:25:12 +0800 [thread overview]
Message-ID: <1346063114-30361-5-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1346063114-30361-1-git-send-email-wni@nvidia.com>
Configure pinmux as required for WiFi.
Enable the SDHCI1 controller, which is connectted to the WiFi module.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm/boot/dts/tegra20-ventana.dts | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 4ec6b4c..3cbe54c 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -237,6 +237,16 @@
"ld23_22";
nvidia,pull = <1>;
};
+ drive_sdio1 {
+ nvidia,pins = "drive_sdio1";
+ nvidia,high-speed-mode = <0>;
+ nvidia,schmitt = <1>;
+ nvidia,low-power-mode = <3>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <3>;
+ nvidia,slew-rate-falling = <3>;
+ };
};
};
@@ -454,6 +464,11 @@
status = "okay";
};
+ sdhci@c8000000 {
+ status = "okay";
+ power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ };
+
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
--
1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: Wei Ni <wni@nvidia.com>
To: swarren@wwwdotorg.org, brudley@broadcom.com, rvossen@broadcom.com
Cc: krakesh@nvidia.com, ldewangan@nvidia.com,
linux-tegra@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org,
brcm80211-dev-list@broadcom.com, Wei Ni <wni@nvidia.com>
Subject: [PATCH 4/6] ARM: dt: t20 ventana: set pinmux and power for wlan
Date: Mon, 27 Aug 2012 18:25:12 +0800 [thread overview]
Message-ID: <1346063114-30361-5-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1346063114-30361-1-git-send-email-wni@nvidia.com>
Configure pinmux as required for WiFi.
Enable the SDHCI1 controller, which is connectted to the WiFi module.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm/boot/dts/tegra20-ventana.dts | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 4ec6b4c..3cbe54c 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -237,6 +237,16 @@
"ld23_22";
nvidia,pull = <1>;
};
+ drive_sdio1 {
+ nvidia,pins = "drive_sdio1";
+ nvidia,high-speed-mode = <0>;
+ nvidia,schmitt = <1>;
+ nvidia,low-power-mode = <3>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <3>;
+ nvidia,slew-rate-falling = <3>;
+ };
};
};
@@ -454,6 +464,11 @@
status = "okay";
};
+ sdhci@c8000000 {
+ status = "okay";
+ power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ };
+
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
--
1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: wni@nvidia.com (Wei Ni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/6] ARM: dt: t20 ventana: set pinmux and power for wlan
Date: Mon, 27 Aug 2012 18:25:12 +0800 [thread overview]
Message-ID: <1346063114-30361-5-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1346063114-30361-1-git-send-email-wni@nvidia.com>
Configure pinmux as required for WiFi.
Enable the SDHCI1 controller, which is connectted to the WiFi module.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm/boot/dts/tegra20-ventana.dts | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 4ec6b4c..3cbe54c 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -237,6 +237,16 @@
"ld23_22";
nvidia,pull = <1>;
};
+ drive_sdio1 {
+ nvidia,pins = "drive_sdio1";
+ nvidia,high-speed-mode = <0>;
+ nvidia,schmitt = <1>;
+ nvidia,low-power-mode = <3>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <3>;
+ nvidia,slew-rate-falling = <3>;
+ };
};
};
@@ -454,6 +464,11 @@
status = "okay";
};
+ sdhci at c8000000 {
+ status = "okay";
+ power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ };
+
sdhci at c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
--
1.7.1
next prev parent reply other threads:[~2012-08-27 10:26 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-27 10:25 [PATCH 0/6] ARM: tegra: enable wlan for t20 and t30 Wei Ni
2012-08-27 10:25 ` Wei Ni
2012-08-27 10:25 ` Wei Ni
2012-08-27 10:25 ` [PATCH 1/6] ARM: tegra: set up wlan clocks for tegra dt Wei Ni
2012-08-27 10:25 ` Wei Ni
2012-08-27 10:25 ` Wei Ni
2012-08-27 10:25 ` [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB Wei Ni
2012-08-27 10:25 ` Wei Ni
2012-08-27 10:25 ` Wei Ni
2012-08-27 16:24 ` Arend van Spriel
2012-08-27 16:24 ` Arend van Spriel
2012-08-27 16:24 ` Arend van Spriel
2012-08-27 20:06 ` Stephen Warren
2012-08-27 20:06 ` Stephen Warren
2012-08-28 11:13 ` Wei Ni
2012-08-28 11:13 ` Wei Ni
2012-08-28 11:13 ` Wei Ni
2012-08-28 11:13 ` Wei Ni
2012-08-28 16:45 ` Franky Lin
2012-08-28 16:45 ` Franky Lin
2012-08-28 16:45 ` Franky Lin
2012-08-28 16:45 ` Franky Lin
2012-08-28 22:39 ` Stephen Warren
2012-08-28 22:39 ` Stephen Warren
2012-08-28 22:39 ` Stephen Warren
2012-08-28 22:39 ` Stephen Warren
2012-08-28 23:01 ` Franky Lin
2012-08-28 23:01 ` Franky Lin
2012-08-28 23:01 ` Franky Lin
2012-08-28 23:04 ` Stephen Warren
2012-08-28 23:04 ` Stephen Warren
2012-08-28 23:04 ` Stephen Warren
2012-08-28 23:04 ` Stephen Warren
2012-08-28 23:10 ` Franky Lin
2012-08-28 23:10 ` Franky Lin
2012-08-28 23:10 ` Franky Lin
2012-08-28 23:10 ` Franky Lin
2012-08-28 6:08 ` Wei Ni
2012-08-28 6:08 ` Wei Ni
2012-08-28 6:08 ` Wei Ni
2012-08-28 6:08 ` Wei Ni
2012-08-27 10:25 ` [PATCH 3/6] ARM: dt: t20 seaboard: turn on the power for wlan Wei Ni
2012-08-27 10:25 ` Wei Ni
2012-08-27 10:25 ` Wei Ni
2012-08-27 10:25 ` Wei Ni [this message]
2012-08-27 10:25 ` [PATCH 4/6] ARM: dt: t20 ventana: set pinmux and " Wei Ni
2012-08-27 10:25 ` Wei Ni
2012-08-27 10:25 ` [PATCH 5/6] ARM: dt: t30 cardhu: " Wei Ni
2012-08-27 10:25 ` Wei Ni
2012-08-27 10:25 ` Wei Ni
2012-08-27 10:25 ` [PATCH 6/6] ARM: tegra: enable wireless in defconfig Wei Ni
2012-08-27 10:25 ` Wei Ni
2012-08-27 10:25 ` Wei Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346063114-30361-5-git-send-email-wni@nvidia.com \
--to=wni@nvidia.com \
--cc=brcm80211-dev-list@broadcom.com \
--cc=brudley@broadcom.com \
--cc=krakesh@nvidia.com \
--cc=ldewangan@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=rvossen@broadcom.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.