From: Vaibhav Hiremath <hvaibhav@ti.com>
To: <linux-omap@vger.kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree-discuss@lists.ozlabs.org>,
<linux-kernel@vger.kernel.org>,
Vaibhav Hiremath <hvaibhav@ti.com>,
Tony Lindgren <tony@atomide.com>
Subject: [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case
Date: Mon, 27 Aug 2012 18:01:53 +0530 [thread overview]
Message-ID: <1346070714-6122-2-git-send-email-hvaibhav@ti.com> (raw)
In-Reply-To: <1346070714-6122-1-git-send-email-hvaibhav@ti.com>
To make it consistent, convert all hex number presentation
to lower-case from all am33xx specific nodes.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/am335x-bone.dts | 2 +-
arch/arm/boot/dts/am335x-evm.dts | 2 +-
arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++----------
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a7906cb..c64f7fa 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -19,7 +19,7 @@
};
ocp {
- uart1: serial@44E09000 {
+ uart1: serial@44e09000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 5dd8a6b..8963f20 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -19,7 +19,7 @@
};
ocp {
- uart1: serial@44E09000 {
+ uart1: serial@44e09000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index dde76f7..be43511 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -71,7 +71,7 @@
#interrupt-cells = <1>;
};
- gpio2: gpio@4804C000 {
+ gpio2: gpio@4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
@@ -80,7 +80,7 @@
#interrupt-cells = <1>;
};
- gpio3: gpio@481AC000 {
+ gpio3: gpio@481ac000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
@@ -89,7 +89,7 @@
#interrupt-cells = <1>;
};
- gpio4: gpio@481AE000 {
+ gpio4: gpio@481ae000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
@@ -98,7 +98,7 @@
#interrupt-cells = <1>;
};
- uart1: serial@44E09000 {
+ uart1: serial@44e09000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
@@ -119,28 +119,28 @@
status = "disabled";
};
- uart4: serial@481A6000 {
+ uart4: serial@481a6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
};
- uart5: serial@481A8000 {
+ uart5: serial@481a8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
};
- uart6: serial@481AA000 {
+ uart6: serial@481aa000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
};
- i2c1: i2c@44E0B000 {
+ i2c1: i2c@44e0b000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -148,7 +148,7 @@
status = "disabled";
};
- i2c2: i2c@4802A000 {
+ i2c2: i2c@4802a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -156,7 +156,7 @@
status = "disabled";
};
- i2c3: i2c@4819C000 {
+ i2c3: i2c@4819c000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
--
1.7.0.4
WARNING: multiple messages have this Message-ID (diff)
From: Vaibhav Hiremath <hvaibhav-l0cyMroinI0@public.gmane.org>
To: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case
Date: Mon, 27 Aug 2012 18:01:53 +0530 [thread overview]
Message-ID: <1346070714-6122-2-git-send-email-hvaibhav@ti.com> (raw)
In-Reply-To: <1346070714-6122-1-git-send-email-hvaibhav-l0cyMroinI0@public.gmane.org>
To make it consistent, convert all hex number presentation
to lower-case from all am33xx specific nodes.
Signed-off-by: Vaibhav Hiremath <hvaibhav-l0cyMroinI0@public.gmane.org>
Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/am335x-bone.dts | 2 +-
arch/arm/boot/dts/am335x-evm.dts | 2 +-
arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++----------
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a7906cb..c64f7fa 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -19,7 +19,7 @@
};
ocp {
- uart1: serial@44E09000 {
+ uart1: serial@44e09000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 5dd8a6b..8963f20 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -19,7 +19,7 @@
};
ocp {
- uart1: serial@44E09000 {
+ uart1: serial@44e09000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index dde76f7..be43511 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -71,7 +71,7 @@
#interrupt-cells = <1>;
};
- gpio2: gpio@4804C000 {
+ gpio2: gpio@4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
@@ -80,7 +80,7 @@
#interrupt-cells = <1>;
};
- gpio3: gpio@481AC000 {
+ gpio3: gpio@481ac000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
@@ -89,7 +89,7 @@
#interrupt-cells = <1>;
};
- gpio4: gpio@481AE000 {
+ gpio4: gpio@481ae000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
@@ -98,7 +98,7 @@
#interrupt-cells = <1>;
};
- uart1: serial@44E09000 {
+ uart1: serial@44e09000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
@@ -119,28 +119,28 @@
status = "disabled";
};
- uart4: serial@481A6000 {
+ uart4: serial@481a6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
};
- uart5: serial@481A8000 {
+ uart5: serial@481a8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
};
- uart6: serial@481AA000 {
+ uart6: serial@481aa000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
};
- i2c1: i2c@44E0B000 {
+ i2c1: i2c@44e0b000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -148,7 +148,7 @@
status = "disabled";
};
- i2c2: i2c@4802A000 {
+ i2c2: i2c@4802a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -156,7 +156,7 @@
status = "disabled";
};
- i2c3: i2c@4819C000 {
+ i2c3: i2c@4819c000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
--
1.7.0.4
WARNING: multiple messages have this Message-ID (diff)
From: hvaibhav@ti.com (Vaibhav Hiremath)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case
Date: Mon, 27 Aug 2012 18:01:53 +0530 [thread overview]
Message-ID: <1346070714-6122-2-git-send-email-hvaibhav@ti.com> (raw)
In-Reply-To: <1346070714-6122-1-git-send-email-hvaibhav@ti.com>
To make it consistent, convert all hex number presentation
to lower-case from all am33xx specific nodes.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/am335x-bone.dts | 2 +-
arch/arm/boot/dts/am335x-evm.dts | 2 +-
arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++----------
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a7906cb..c64f7fa 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -19,7 +19,7 @@
};
ocp {
- uart1: serial at 44E09000 {
+ uart1: serial at 44e09000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 5dd8a6b..8963f20 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -19,7 +19,7 @@
};
ocp {
- uart1: serial at 44E09000 {
+ uart1: serial at 44e09000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index dde76f7..be43511 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -71,7 +71,7 @@
#interrupt-cells = <1>;
};
- gpio2: gpio at 4804C000 {
+ gpio2: gpio at 4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
@@ -80,7 +80,7 @@
#interrupt-cells = <1>;
};
- gpio3: gpio at 481AC000 {
+ gpio3: gpio at 481ac000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
@@ -89,7 +89,7 @@
#interrupt-cells = <1>;
};
- gpio4: gpio at 481AE000 {
+ gpio4: gpio at 481ae000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
@@ -98,7 +98,7 @@
#interrupt-cells = <1>;
};
- uart1: serial at 44E09000 {
+ uart1: serial at 44e09000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
@@ -119,28 +119,28 @@
status = "disabled";
};
- uart4: serial at 481A6000 {
+ uart4: serial at 481a6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
};
- uart5: serial at 481A8000 {
+ uart5: serial at 481a8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
};
- uart6: serial at 481AA000 {
+ uart6: serial at 481aa000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
};
- i2c1: i2c at 44E0B000 {
+ i2c1: i2c at 44e0b000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -148,7 +148,7 @@
status = "disabled";
};
- i2c2: i2c at 4802A000 {
+ i2c2: i2c at 4802a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -156,7 +156,7 @@
status = "disabled";
};
- i2c3: i2c at 4819C000 {
+ i2c3: i2c at 4819c000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
--
1.7.0.4
next prev parent reply other threads:[~2012-08-27 12:33 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-27 12:31 [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes Vaibhav Hiremath
2012-08-27 12:31 ` Vaibhav Hiremath
2012-08-27 12:31 ` Vaibhav Hiremath
2012-08-27 12:31 ` Vaibhav Hiremath [this message]
2012-08-27 12:31 ` [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case Vaibhav Hiremath
2012-08-27 12:31 ` Vaibhav Hiremath
2012-08-27 12:31 ` [PATCH 2/2] arm/dts: AM33XX: Specify reg and interrupt property for all nodes Vaibhav Hiremath
2012-08-27 12:31 ` Vaibhav Hiremath
2012-08-27 12:31 ` Vaibhav Hiremath
2012-09-06 13:57 ` [PATCH 0/2] arm/dts: AM33XX: Add " Benoit Cousson
2012-09-06 13:57 ` Benoit Cousson
2012-09-06 13:57 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346070714-6122-2-git-send-email-hvaibhav@ti.com \
--to=hvaibhav@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.