From: Kishon Vijay Abraham I <kishon@ti.com>
To: <grant.likely@secretlab.ca>, <rob.herring@calxeda.com>,
<rob@landley.net>, <b-cousson@ti.com>, <tony@atomide.com>,
<linux@arm.linux.org.uk>, <balbi@ti.com>,
<gregkh@linuxfoundation.org>, <kishon@ti.com>,
<devicetree-discuss@lists.ozlabs.org>,
<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-usb@vger.kernel.org>
Subject: [PATCH v3 2/3] ARM: dts: Add twl4030-usb data
Date: Wed, 19 Sep 2012 15:02:07 +0530 [thread overview]
Message-ID: <1348047128-25692-3-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1348047128-25692-1-git-send-email-kishon@ti.com>
Add twl4030-usb data node in twl4030 device tree file. twl4030-usb is the phy
driver for MUSB used in omap3 chipsets. The dt data is comprised of two
interrupts, one for ID and one for VBUS and three phandles to regulator.
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/twl4030.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ff00017..18fa7a4 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -37,6 +37,18 @@
regulator-max-microvolt = <3150000>;
};
+ vusb1v5: regulator-vusb1v5 {
+ compatible = "ti,twl4030-vusb1v5";
+ };
+
+ vusb1v8: regulator-vusb1v8 {
+ compatible = "ti,twl4030-vusb1v8";
+ };
+
+ vusb3v1: regulator-vusb3v1 {
+ compatible = "ti,twl4030-vusb3v1";
+ };
+
twl_gpio: gpio {
compatible = "ti,twl4030-gpio";
gpio-controller;
@@ -44,4 +56,13 @@
interrupt-controller;
#interrupt-cells = <1>;
};
+
+ twl4030-usb {
+ compatible = "ti,twl4030-usb";
+ interrupts = <10>, <4>;
+ usb1v5-supply = <&vusb1v5>;
+ usb1v8-supply = <&vusb1v8>;
+ usb3v1-supply = <&vusb3v1>;
+ usb_mode = <1>;
+ };
};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: grant.likely@secretlab.ca, rob.herring@calxeda.com,
rob@landley.net, b-cousson@ti.com, tony@atomide.com,
linux@arm.linux.org.uk, balbi@ti.com, gregkh@linuxfoundation.org,
kishon@ti.com, devicetree-discuss@lists.ozlabs.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org
Subject: [PATCH v3 2/3] ARM: dts: Add twl4030-usb data
Date: Wed, 19 Sep 2012 15:02:07 +0530 [thread overview]
Message-ID: <1348047128-25692-3-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1348047128-25692-1-git-send-email-kishon@ti.com>
Add twl4030-usb data node in twl4030 device tree file. twl4030-usb is the phy
driver for MUSB used in omap3 chipsets. The dt data is comprised of two
interrupts, one for ID and one for VBUS and three phandles to regulator.
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/twl4030.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ff00017..18fa7a4 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -37,6 +37,18 @@
regulator-max-microvolt = <3150000>;
};
+ vusb1v5: regulator-vusb1v5 {
+ compatible = "ti,twl4030-vusb1v5";
+ };
+
+ vusb1v8: regulator-vusb1v8 {
+ compatible = "ti,twl4030-vusb1v8";
+ };
+
+ vusb3v1: regulator-vusb3v1 {
+ compatible = "ti,twl4030-vusb3v1";
+ };
+
twl_gpio: gpio {
compatible = "ti,twl4030-gpio";
gpio-controller;
@@ -44,4 +56,13 @@
interrupt-controller;
#interrupt-cells = <1>;
};
+
+ twl4030-usb {
+ compatible = "ti,twl4030-usb";
+ interrupts = <10>, <4>;
+ usb1v5-supply = <&vusb1v5>;
+ usb1v8-supply = <&vusb1v8>;
+ usb3v1-supply = <&vusb3v1>;
+ usb_mode = <1>;
+ };
};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/3] ARM: dts: Add twl4030-usb data
Date: Wed, 19 Sep 2012 15:02:07 +0530 [thread overview]
Message-ID: <1348047128-25692-3-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1348047128-25692-1-git-send-email-kishon@ti.com>
Add twl4030-usb data node in twl4030 device tree file. twl4030-usb is the phy
driver for MUSB used in omap3 chipsets. The dt data is comprised of two
interrupts, one for ID and one for VBUS and three phandles to regulator.
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/twl4030.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ff00017..18fa7a4 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -37,6 +37,18 @@
regulator-max-microvolt = <3150000>;
};
+ vusb1v5: regulator-vusb1v5 {
+ compatible = "ti,twl4030-vusb1v5";
+ };
+
+ vusb1v8: regulator-vusb1v8 {
+ compatible = "ti,twl4030-vusb1v8";
+ };
+
+ vusb3v1: regulator-vusb3v1 {
+ compatible = "ti,twl4030-vusb3v1";
+ };
+
twl_gpio: gpio {
compatible = "ti,twl4030-gpio";
gpio-controller;
@@ -44,4 +56,13 @@
interrupt-controller;
#interrupt-cells = <1>;
};
+
+ twl4030-usb {
+ compatible = "ti,twl4030-usb";
+ interrupts = <10>, <4>;
+ usb1v5-supply = <&vusb1v5>;
+ usb1v8-supply = <&vusb1v8>;
+ usb3v1-supply = <&vusb3v1>;
+ usb_mode = <1>;
+ };
};
--
1.7.9.5
next prev parent reply other threads:[~2012-09-19 9:32 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-19 9:32 [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB Kishon Vijay Abraham I
2012-09-19 9:32 ` Kishon Vijay Abraham I
2012-09-19 9:32 ` Kishon Vijay Abraham I
2012-09-19 9:32 ` [PATCH v3 1/3] ARM: dts: Add twl6030-usb data Kishon Vijay Abraham I
2012-09-19 9:32 ` Kishon Vijay Abraham I
2012-09-19 9:32 ` Kishon Vijay Abraham I
2012-09-19 9:32 ` Kishon Vijay Abraham I [this message]
2012-09-19 9:32 ` [PATCH v3 2/3] ARM: dts: Add twl4030-usb data Kishon Vijay Abraham I
2012-09-19 9:32 ` Kishon Vijay Abraham I
2012-09-19 9:32 ` [PATCH v3 3/3] ARM: dts: omap: Add usb_otg and glue data Kishon Vijay Abraham I
2012-09-19 9:32 ` Kishon Vijay Abraham I
2012-09-19 9:32 ` Kishon Vijay Abraham I
2012-09-20 3:21 ` [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB Benoit Cousson
2012-09-20 3:21 ` Benoit Cousson
2012-09-20 3:21 ` Benoit Cousson
2012-12-27 18:35 ` Aaro Koskinen
2012-12-27 18:35 ` Aaro Koskinen
2013-01-10 6:19 ` kishon
2013-01-10 6:19 ` kishon
2013-01-10 6:19 ` kishon
2013-01-10 9:58 ` Benoit Cousson
2013-01-10 9:58 ` Benoit Cousson
2013-01-10 9:58 ` Benoit Cousson
2013-01-10 10:53 ` kishon
2013-01-10 10:53 ` kishon
2013-01-10 10:53 ` kishon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348047128-25692-3-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=b-cousson@ti.com \
--cc=balbi@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.