From: Tomi Valkeinen <tomi.valkeinen@ti.com> To: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org, Tony Lindgren <tony@atomide.com> Cc: Archit Taneja <archit@ti.com>, Tomi Valkeinen <tomi.valkeinen@ti.com> Subject: [PATCHv2 3/3] OMAP: SDRC: remove VRFB code Date: Tue, 09 Oct 2012 12:30:26 +0000 [thread overview] Message-ID: <1349785827-27055-4-git-send-email-tomi.valkeinen@ti.com> (raw) In-Reply-To: <1349785827-27055-1-git-send-email-tomi.valkeinen@ti.com> Now that VRFB driver handles its registers independently, we can remove the VRFB related code from OMAP's sdrc. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/sdrc.c | 16 ---------------- arch/arm/plat-omap/include/plat/sdrc.h | 7 ------- 2 files changed, 23 deletions(-) diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index e3d345f..4282e6e 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -160,19 +160,3 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, sdrc_write_reg(l, SDRC_POWER); omap2_sms_save_context(); } - -void omap2_sms_write_rot_control(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_CONTROL(ctx)); -} - -void omap2_sms_write_rot_size(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_SIZE(ctx)); -} - -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx)); -} - diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 36d6a76..c68bab2 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -94,9 +94,6 @@ /* SMS register offsets - read/write with sms_{read,write}_reg() */ #define SMS_SYSCONFIG 0x010 -#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) -#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) -#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) /* REVISIT: fill in other SMS registers here */ @@ -137,10 +134,6 @@ int omap2_sdrc_get_params(unsigned long r, void omap2_sms_save_context(void); void omap2_sms_restore_context(void); -void omap2_sms_write_rot_control(u32 val, unsigned ctx); -void omap2_sms_write_rot_size(u32 val, unsigned ctx); -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); - #ifdef CONFIG_ARCH_OMAP2 struct memory_timings { -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Tomi Valkeinen <tomi.valkeinen@ti.com> To: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org, Tony Lindgren <tony@atomide.com> Cc: Archit Taneja <archit@ti.com>, Tomi Valkeinen <tomi.valkeinen@ti.com> Subject: [PATCHv2 3/3] OMAP: SDRC: remove VRFB code Date: Tue, 9 Oct 2012 15:30:26 +0300 [thread overview] Message-ID: <1349785827-27055-4-git-send-email-tomi.valkeinen@ti.com> (raw) In-Reply-To: <1349785827-27055-1-git-send-email-tomi.valkeinen@ti.com> Now that VRFB driver handles its registers independently, we can remove the VRFB related code from OMAP's sdrc. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/sdrc.c | 16 ---------------- arch/arm/plat-omap/include/plat/sdrc.h | 7 ------- 2 files changed, 23 deletions(-) diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index e3d345f..4282e6e 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -160,19 +160,3 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, sdrc_write_reg(l, SDRC_POWER); omap2_sms_save_context(); } - -void omap2_sms_write_rot_control(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_CONTROL(ctx)); -} - -void omap2_sms_write_rot_size(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_SIZE(ctx)); -} - -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx)); -} - diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 36d6a76..c68bab2 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -94,9 +94,6 @@ /* SMS register offsets - read/write with sms_{read,write}_reg() */ #define SMS_SYSCONFIG 0x010 -#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) -#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) -#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) /* REVISIT: fill in other SMS registers here */ @@ -137,10 +134,6 @@ int omap2_sdrc_get_params(unsigned long r, void omap2_sms_save_context(void); void omap2_sms_restore_context(void); -void omap2_sms_write_rot_control(u32 val, unsigned ctx); -void omap2_sms_write_rot_size(u32 val, unsigned ctx); -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); - #ifdef CONFIG_ARCH_OMAP2 struct memory_timings { -- 1.7.9.5
next prev parent reply other threads:[~2012-10-09 12:30 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-10-09 12:30 [PATCHv2 0/3] OMAP: VRFB: convert to platform device Tomi Valkeinen 2012-10-09 12:30 ` Tomi Valkeinen 2012-10-09 12:30 ` [PATCHv2 1/3] OMAP: VRFB: convert vrfb " Tomi Valkeinen 2012-10-09 12:30 ` Tomi Valkeinen 2012-10-09 20:37 ` Kevin Hilman 2012-10-09 20:37 ` Kevin Hilman 2012-10-10 4:07 ` Tomi Valkeinen 2012-10-10 4:07 ` Tomi Valkeinen 2012-10-10 18:12 ` Kevin Hilman 2012-10-10 18:12 ` Kevin Hilman 2012-10-09 12:30 ` [PATCHv2 2/3] OMAP: move arch/arm/plat-omap/include/plat/vrfb.h Tomi Valkeinen 2012-10-09 12:30 ` Tomi Valkeinen 2012-10-09 12:54 ` Hiremath, Vaibhav 2012-10-09 12:54 ` Hiremath, Vaibhav 2012-10-09 12:57 ` Tomi Valkeinen 2012-10-09 12:57 ` Tomi Valkeinen 2012-10-09 12:30 ` Tomi Valkeinen [this message] 2012-10-09 12:30 ` [PATCHv2 3/3] OMAP: SDRC: remove VRFB code Tomi Valkeinen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1349785827-27055-4-git-send-email-tomi.valkeinen@ti.com \ --to=tomi.valkeinen@ti.com \ --cc=archit@ti.com \ --cc=linux-fbdev@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.