From: Simon Horman <horms@verge.net.au> To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 09/10] ARM: shmobile: r8a7779: add I2C driver support Date: Wed, 17 Oct 2012 04:39:20 +0000 [thread overview] Message-ID: <1350448761-27346-10-git-send-email-horms@verge.net.au> (raw) In-Reply-To: <1350448761-27346-1-git-send-email-horms@verge.net.au> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> This patch enable R-Car I2C driver Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au> --- arch/arm/configs/marzen_defconfig | 2 + arch/arm/mach-shmobile/setup-r8a7779.c | 77 ++++++++++++++++++++++++++++++++ 2 files changed, 79 insertions(+) diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 53382b6..f79b55c 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -69,6 +69,8 @@ CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_RCAR=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_THERMAL=y diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 2917668..63de5cb 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -229,6 +229,79 @@ static struct platform_device tmu01_device = { .num_resources = ARRAY_SIZE(tmu01_resources), }; +/* I2C */ +static struct resource rcar_i2c0_res[] = { + { + .start = 0xffc70000, + .end = 0xffc70fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(79), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c0_device = { + .name = "i2c-rcar", + .id = 0, + .resource = rcar_i2c0_res, + .num_resources = ARRAY_SIZE(rcar_i2c0_res), +}; + +static struct resource rcar_i2c1_res[] = { + { + .start = 0xffc71000, + .end = 0xffc71fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(82), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c1_device = { + .name = "i2c-rcar", + .id = 1, + .resource = rcar_i2c1_res, + .num_resources = ARRAY_SIZE(rcar_i2c1_res), +}; + +static struct resource rcar_i2c2_res[] = { + { + .start = 0xffc72000, + .end = 0xffc72fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(80), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c2_device = { + .name = "i2c-rcar", + .id = 2, + .resource = rcar_i2c2_res, + .num_resources = ARRAY_SIZE(rcar_i2c2_res), +}; + +static struct resource rcar_i2c3_res[] = { + { + .start = 0xffc73000, + .end = 0xffc73fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(81), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c3_device = { + .name = "i2c-rcar", + .id = 3, + .resource = rcar_i2c3_res, + .num_resources = ARRAY_SIZE(rcar_i2c3_res), +}; + static struct platform_device *r8a7779_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -238,6 +311,10 @@ static struct platform_device *r8a7779_early_devices[] __initdata = { &scif5_device, &tmu00_device, &tmu01_device, + &i2c0_device, + &i2c1_device, + &i2c2_device, + &i2c3_device, }; static struct platform_device *r8a7779_late_devices[] __initdata = { -- 1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: horms@verge.net.au (Simon Horman) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 09/10] ARM: shmobile: r8a7779: add I2C driver support Date: Wed, 17 Oct 2012 13:39:20 +0900 [thread overview] Message-ID: <1350448761-27346-10-git-send-email-horms@verge.net.au> (raw) In-Reply-To: <1350448761-27346-1-git-send-email-horms@verge.net.au> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> This patch enable R-Car I2C driver Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au> --- arch/arm/configs/marzen_defconfig | 2 + arch/arm/mach-shmobile/setup-r8a7779.c | 77 ++++++++++++++++++++++++++++++++ 2 files changed, 79 insertions(+) diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 53382b6..f79b55c 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -69,6 +69,8 @@ CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_RCAR=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_THERMAL=y diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 2917668..63de5cb 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -229,6 +229,79 @@ static struct platform_device tmu01_device = { .num_resources = ARRAY_SIZE(tmu01_resources), }; +/* I2C */ +static struct resource rcar_i2c0_res[] = { + { + .start = 0xffc70000, + .end = 0xffc70fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(79), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c0_device = { + .name = "i2c-rcar", + .id = 0, + .resource = rcar_i2c0_res, + .num_resources = ARRAY_SIZE(rcar_i2c0_res), +}; + +static struct resource rcar_i2c1_res[] = { + { + .start = 0xffc71000, + .end = 0xffc71fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(82), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c1_device = { + .name = "i2c-rcar", + .id = 1, + .resource = rcar_i2c1_res, + .num_resources = ARRAY_SIZE(rcar_i2c1_res), +}; + +static struct resource rcar_i2c2_res[] = { + { + .start = 0xffc72000, + .end = 0xffc72fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(80), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c2_device = { + .name = "i2c-rcar", + .id = 2, + .resource = rcar_i2c2_res, + .num_resources = ARRAY_SIZE(rcar_i2c2_res), +}; + +static struct resource rcar_i2c3_res[] = { + { + .start = 0xffc73000, + .end = 0xffc73fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(81), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c3_device = { + .name = "i2c-rcar", + .id = 3, + .resource = rcar_i2c3_res, + .num_resources = ARRAY_SIZE(rcar_i2c3_res), +}; + static struct platform_device *r8a7779_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -238,6 +311,10 @@ static struct platform_device *r8a7779_early_devices[] __initdata = { &scif5_device, &tmu00_device, &tmu01_device, + &i2c0_device, + &i2c1_device, + &i2c2_device, + &i2c3_device, }; static struct platform_device *r8a7779_late_devices[] __initdata = { -- 1.7.10.4
next prev parent reply other threads:[~2012-10-17 4:39 UTC|newest] Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-10-17 4:39 [GIT PULL] Renesas ARM-based SoC boards for v3.8 Simon Horman 2012-10-17 4:39 ` Simon Horman 2012-10-17 4:39 ` [PATCH 01/10] ARM: shmobile: r8a7740: Enable PMU Simon Horman 2012-10-17 4:39 ` Simon Horman 2012-10-17 4:39 ` [PATCH 02/10] ARM: shmobile: kzm9g: enable magnetometer ak8975 Simon Horman 2012-10-17 4:39 ` Simon Horman 2012-10-17 4:39 ` [PATCH 03/10] ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345 Simon Horman 2012-10-17 4:39 ` Simon Horman 2012-10-17 4:39 ` [PATCH 04/10] ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2 Simon Horman 2012-10-17 4:39 ` Simon Horman 2012-10-17 4:39 ` [PATCH 05/10] ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372 Simon Horman 2012-10-17 4:39 ` Simon Horman 2012-10-17 4:39 ` [PATCH 06/10] ARM: shmobile: armadillo800eva: enable restart Simon Horman 2012-10-17 4:39 ` Simon Horman 2012-10-17 4:39 ` [PATCH 07/10] ARM: shmobile: r8a7779: add HSPI clock support Simon Horman 2012-10-17 4:39 ` Simon Horman 2012-10-17 4:39 ` [PATCH 08/10] ARM: shmobile: r8a7779: add I2C " Simon Horman 2012-10-17 4:39 ` Simon Horman 2012-10-17 4:39 ` Simon Horman [this message] 2012-10-17 4:39 ` [PATCH 09/10] ARM: shmobile: r8a7779: add I2C driver support Simon Horman 2012-10-17 4:39 ` [PATCH 10/10] ARM: shmobile: marzen: add HSPI support Simon Horman 2012-10-17 4:39 ` Simon Horman 2012-11-07 8:40 ` [GIT PULL] Renesas ARM-based SoC boards for v3.8 #2 Simon Horman 2012-11-07 8:40 ` Simon Horman 2012-11-07 8:40 ` [PATCH 1/3] ARM: shmobile: marzen: add USB phy support Simon Horman 2012-11-07 8:40 ` Simon Horman 2012-11-07 8:40 ` [PATCH 2/3] ARM: shmobile: marzen: add USB EHCI driver support Simon Horman 2012-11-07 8:40 ` Simon Horman 2012-11-07 8:40 ` [PATCH 3/3] ARM: shmobile: marzen: add USB OHCI " Simon Horman 2012-11-07 8:40 ` Simon Horman 2012-11-19 1:24 ` [GIT PULL] Renesas ARM-based SoC boards for v3.8 #3 Simon Horman 2012-11-19 1:24 ` Simon Horman 2012-11-19 1:24 ` [PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource Simon Horman 2012-11-19 1:24 ` Simon Horman 2012-11-19 12:30 ` Sergei Shtylyov 2012-11-19 12:30 ` Sergei Shtylyov 2012-11-20 0:03 ` Simon Horman 2012-11-20 0:03 ` Simon Horman 2013-01-25 2:17 ` [GIT PULL] Renesas ARM-based SoC boards for v3.9 Simon Horman 2013-01-25 2:17 ` Simon Horman 2013-01-25 2:17 ` [PATCH 1/7] ARM: mackerel: include the correct .dtsi file Simon Horman 2013-01-25 2:17 ` Simon Horman 2013-01-25 2:17 ` [PATCH 2/7] ARM: shmobile: fix sample amixer settings for mackerel Simon Horman 2013-01-25 2:17 ` Simon Horman 2013-01-25 2:17 ` [PATCH 3/7] ARM: shmobile: add sample amixer settings for ap4evb Simon Horman 2013-01-25 2:17 ` Simon Horman 2013-01-25 2:17 ` [PATCH 4/7] ARM: shmobile: add sample amixer settings for armadillo800eva Simon Horman 2013-01-25 2:17 ` Simon Horman 2013-01-25 2:17 ` [PATCH 5/7] ARM: shmobile: kzm9g: Use of_machine_is_compatible() Simon Horman 2013-01-25 2:17 ` Simon Horman 2013-01-25 2:17 ` [PATCH 6/7] ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva Simon Horman 2013-01-25 2:17 ` Simon Horman 2013-01-25 2:17 ` [PATCH 7/7] ARM: shmobile: Include sh73a0 DTSI in kzm9g Simon Horman 2013-01-25 2:17 ` Simon Horman 2013-01-29 17:03 ` [GIT PULL] Renesas ARM-based SoC boards for v3.9 Olof Johansson 2013-01-29 17:03 ` Olof Johansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1350448761-27346-10-git-send-email-horms@verge.net.au \ --to=horms@verge.net.au \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.