All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sourav Poddar <sourav.poddar@ti.com>
To: <tony@atomide.com>, <b-cousson@ti.com>
Cc: <linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<devicetree-discuss@lists.ozlabs.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Sourav Poddar <sourav.poddar@ti.com>, Felipe Balbi <balbi@ti.com>
Subject: [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad
Date: Mon, 22 Oct 2012 12:59:15 +0530	[thread overview]
Message-ID: <1350890955-29553-1-git-send-email-sourav.poddar@ti.com> (raw)

Currently, omap4 keypad mux settings are done in the board file.
Populate the mux settings in the dts file for the keypad to
work via dt.

Cc: Felipe Balbi <balbi@ti.com>
Tested on omap4430 sdp with 3.7-rc1.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
---
 arch/arm/boot/dts/omap4-sdp.dts |   26 ++++++++++++++++++++++++++
 1 files changed, 26 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 5b7e04f..5efb059 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -194,6 +194,27 @@
 			0xbc 0x100	/* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
 		>;
 	};
+
+	keypad_pins: pinmux_keypad_pins {
+		pinctrl-single,pins = <
+			0x24 0x4119   /* gpmc_a18.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x26 0x4119   /* gpmc_a19.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x2c 0x4001   /* gpmc_a22.kpd_col6 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x2e 0x4001   /* gpmc_a23.kpd_col7 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x13c 0x4001  /* kpd_col0.kpd_col0 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x13e 0x4001  /* kpd_col1.kpd_col1 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x140 0x4001  /* kpd_col2.kpd_col2 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x142 0x10F   /* kpd_col3.kpd_col3 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x144 0x4001  /* kpd_col4.kpd_col4 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x146 0x4001  /* kpd_col5.kpd_col5 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x148 0xc119  /* kpd_row0.kpd_row0 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x14a 0x4119  /* kpd_row1.kpd_row1 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x14c 0x4119  /* kpd_row2.kpd_row2 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x14e 0x4119  /* kpd_row3.kpd_row3 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x150 0x4119  /* kpd_row4.kpd_row4 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x152 0x4119  /* kpd_row5.kpd_row5 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+		>;
+	};
 };
 
 &i2c1 {
@@ -406,3 +427,8 @@
 &mcbsp3 {
 	status = "disabled";
 };
+
+&keypad {
+        pinctrl-names = "default";
+        pinctrl-0 = <&keypad_pins>;
+};
-- 
1.7.1


WARNING: multiple messages have this Message-ID (diff)
From: Sourav Poddar <sourav.poddar@ti.com>
To: tony@atomide.com, b-cousson@ti.com
Cc: linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree-discuss@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org,
	Sourav Poddar <sourav.poddar@ti.com>, Felipe Balbi <balbi@ti.com>
Subject: [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad
Date: Mon, 22 Oct 2012 12:59:15 +0530	[thread overview]
Message-ID: <1350890955-29553-1-git-send-email-sourav.poddar@ti.com> (raw)

Currently, omap4 keypad mux settings are done in the board file.
Populate the mux settings in the dts file for the keypad to
work via dt.

Cc: Felipe Balbi <balbi@ti.com>
Tested on omap4430 sdp with 3.7-rc1.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
---
 arch/arm/boot/dts/omap4-sdp.dts |   26 ++++++++++++++++++++++++++
 1 files changed, 26 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 5b7e04f..5efb059 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -194,6 +194,27 @@
 			0xbc 0x100	/* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
 		>;
 	};
+
+	keypad_pins: pinmux_keypad_pins {
+		pinctrl-single,pins = <
+			0x24 0x4119   /* gpmc_a18.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x26 0x4119   /* gpmc_a19.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x2c 0x4001   /* gpmc_a22.kpd_col6 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x2e 0x4001   /* gpmc_a23.kpd_col7 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x13c 0x4001  /* kpd_col0.kpd_col0 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x13e 0x4001  /* kpd_col1.kpd_col1 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x140 0x4001  /* kpd_col2.kpd_col2 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x142 0x10F   /* kpd_col3.kpd_col3 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x144 0x4001  /* kpd_col4.kpd_col4 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x146 0x4001  /* kpd_col5.kpd_col5 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x148 0xc119  /* kpd_row0.kpd_row0 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x14a 0x4119  /* kpd_row1.kpd_row1 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x14c 0x4119  /* kpd_row2.kpd_row2 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x14e 0x4119  /* kpd_row3.kpd_row3 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x150 0x4119  /* kpd_row4.kpd_row4 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x152 0x4119  /* kpd_row5.kpd_row5 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+		>;
+	};
 };
 
 &i2c1 {
@@ -406,3 +427,8 @@
 &mcbsp3 {
 	status = "disabled";
 };
+
+&keypad {
+        pinctrl-names = "default";
+        pinctrl-0 = <&keypad_pins>;
+};
-- 
1.7.1


WARNING: multiple messages have this Message-ID (diff)
From: sourav.poddar@ti.com (Sourav Poddar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad
Date: Mon, 22 Oct 2012 12:59:15 +0530	[thread overview]
Message-ID: <1350890955-29553-1-git-send-email-sourav.poddar@ti.com> (raw)

Currently, omap4 keypad mux settings are done in the board file.
Populate the mux settings in the dts file for the keypad to
work via dt.

Cc: Felipe Balbi <balbi@ti.com>
Tested on omap4430 sdp with 3.7-rc1.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
---
 arch/arm/boot/dts/omap4-sdp.dts |   26 ++++++++++++++++++++++++++
 1 files changed, 26 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 5b7e04f..5efb059 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -194,6 +194,27 @@
 			0xbc 0x100	/* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
 		>;
 	};
+
+	keypad_pins: pinmux_keypad_pins {
+		pinctrl-single,pins = <
+			0x24 0x4119   /* gpmc_a18.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x26 0x4119   /* gpmc_a19.kpd_row6 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x2c 0x4001   /* gpmc_a22.kpd_col6 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x2e 0x4001   /* gpmc_a23.kpd_col7 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x13c 0x4001  /* kpd_col0.kpd_col0 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x13e 0x4001  /* kpd_col1.kpd_col1 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x140 0x4001  /* kpd_col2.kpd_col2 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x142 0x10F   /* kpd_col3.kpd_col3 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x144 0x4001  /* kpd_col4.kpd_col4 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x146 0x4001  /* kpd_col5.kpd_col5 OMAP_WAKEUP_EN | OMAP_MUX_MODE1 */
+			0x148 0xc119  /* kpd_row0.kpd_row0 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x14a 0x4119  /* kpd_row1.kpd_row1 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x14c 0x4119  /* kpd_row2.kpd_row2 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x14e 0x4119  /* kpd_row3.kpd_row3 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x150 0x4119  /* kpd_row4.kpd_row4 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+			0x152 0x4119  /* kpd_row5.kpd_row5 OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | OMAP_MUX_MODE1 | OMAP_INPUT_EN */
+		>;
+	};
 };
 
 &i2c1 {
@@ -406,3 +427,8 @@
 &mcbsp3 {
 	status = "disabled";
 };
+
+&keypad {
+        pinctrl-names = "default";
+        pinctrl-0 = <&keypad_pins>;
+};
-- 
1.7.1

             reply	other threads:[~2012-10-22  7:29 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-22  7:29 Sourav Poddar [this message]
2012-10-22  7:29 ` [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad Sourav Poddar
2012-10-22  7:29 ` Sourav Poddar
2012-10-22  7:45 ` Benoit Cousson
2012-10-22  7:45   ` Benoit Cousson
2012-10-22  7:45   ` Benoit Cousson
2012-10-22  8:23   ` Sourav
2012-10-22  8:23     ` Sourav
2012-10-22  8:23     ` Sourav
2012-10-22  8:26     ` Benoit Cousson
2012-10-22  8:26       ` Benoit Cousson
2012-10-22  8:26       ` Benoit Cousson
2012-10-22 16:19 ` Tony Lindgren
2012-10-22 16:19   ` Tony Lindgren
2012-10-23  6:24   ` Sourav
2012-10-23  6:24     ` Sourav
2012-10-23  6:24     ` Sourav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1350890955-29553-1-git-send-email-sourav.poddar@ti.com \
    --to=sourav.poddar@ti.com \
    --cc=b-cousson@ti.com \
    --cc=balbi@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.