All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 10/18] drm/i915: convert PIPE_MSA_MISC to transcoder
Date: Tue, 23 Oct 2012 18:30:00 -0200	[thread overview]
Message-ID: <1351024208-3489-11-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1351024208-3489-1-git-send-email-przanoni@gmail.com>

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

Same as the other registers. This one also appeared on Haswell for the
first time, so that's why we are renaming it.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h  | 19 ++++++++++---------
 drivers/gpu/drm/i915/intel_ddi.c | 18 +++++++++---------
 2 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 439ba3d..6ec99e3 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4556,15 +4556,16 @@
 #define  TRANS_CLK_SEL_DISABLED		(0x0<<29)
 #define  TRANS_CLK_SEL_PORT(x)		((x+1)<<29)
 
-#define _PIPEA_MSA_MISC			0x60410
-#define _PIPEB_MSA_MISC			0x61410
-#define PIPE_MSA_MISC(pipe) _PIPE(pipe, _PIPEA_MSA_MISC, _PIPEB_MSA_MISC)
-#define  PIPE_MSA_SYNC_CLK		(1<<0)
-#define  PIPE_MSA_6_BPC			(0<<5)
-#define  PIPE_MSA_8_BPC			(1<<5)
-#define  PIPE_MSA_10_BPC		(2<<5)
-#define  PIPE_MSA_12_BPC		(3<<5)
-#define  PIPE_MSA_16_BPC		(4<<5)
+#define _TRANSA_MSA_MISC		0x60410
+#define _TRANSB_MSA_MISC		0x61410
+#define TRANS_MSA_MISC(tran) _TRANSCODER(tran, _TRANSA_MSA_MISC, \
+					       _TRANSB_MSA_MISC)
+#define  TRANS_MSA_SYNC_CLK		(1<<0)
+#define  TRANS_MSA_6_BPC		(0<<5)
+#define  TRANS_MSA_8_BPC		(1<<5)
+#define  TRANS_MSA_10_BPC		(2<<5)
+#define  TRANS_MSA_12_BPC		(3<<5)
+#define  TRANS_MSA_16_BPC		(4<<5)
 
 /* LCPLL Control */
 #define LCPLL_CTL			0x130040
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 93e0374..3283f6f 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -888,32 +888,32 @@ void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
 	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
-	enum pipe pipe = intel_crtc->pipe;
+	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
 	int type = intel_encoder->type;
 	uint32_t temp;
 
 	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
 
-		temp = PIPE_MSA_SYNC_CLK;
+		temp = TRANS_MSA_SYNC_CLK;
 		switch (intel_crtc->bpp) {
 		case 18:
-			temp |= PIPE_MSA_6_BPC;
+			temp |= TRANS_MSA_6_BPC;
 			break;
 		case 24:
-			temp |= PIPE_MSA_8_BPC;
+			temp |= TRANS_MSA_8_BPC;
 			break;
 		case 30:
-			temp |= PIPE_MSA_10_BPC;
+			temp |= TRANS_MSA_10_BPC;
 			break;
 		case 36:
-			temp |= PIPE_MSA_12_BPC;
+			temp |= TRANS_MSA_12_BPC;
 			break;
 		default:
-			temp |= PIPE_MSA_8_BPC;
-			WARN(1, "%d bpp unsupported by pipe DDI function\n",
+			temp |= TRANS_MSA_8_BPC;
+			WARN(1, "%d bpp unsupported by DDI function\n",
 			     intel_crtc->bpp);
 		}
-		I915_WRITE(PIPE_MSA_MISC(pipe), temp);
+		I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp);
 	}
 }
 
-- 
1.7.11.4

  parent reply	other threads:[~2012-10-23 20:30 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-23 20:29 [PATCH 00/18] Haswell eDP enablement v3 Paulo Zanoni
2012-10-23 20:29 ` [PATCH 01/18] drm/i915: fork a Haswell version of ironlake_crtc_{enable, disable} Paulo Zanoni
2012-10-24 13:15   ` Rodrigo Vivi
2012-10-25 11:03   ` Jani Nikula
2012-10-23 20:29 ` [PATCH 02/18] drm/i915: fix the checks inside Ironlake/Haswell crtc enable/disable Paulo Zanoni
2012-10-24 13:18   ` Rodrigo Vivi
2012-10-24 13:31   ` Paulo Zanoni
2012-10-23 20:29 ` [PATCH 03/18] drm/i915: simplify intel_crtc_driving_pch Paulo Zanoni
2012-10-25 11:13   ` Jani Nikula
2012-10-25 12:04     ` Paulo Zanoni
2012-10-25 12:37   ` Paulo Zanoni
2012-10-23 20:29 ` [PATCH 04/18] drm/i915: don't call Haswell PCH code when we can't or don't need Paulo Zanoni
2012-10-25 12:18   ` Jani Nikula
2012-10-23 20:29 ` [PATCH 05/18] drm/i915: add TRANSCODER_EDP Paulo Zanoni
2012-10-24 14:50   ` Lespiau, Damien
2012-10-24 16:33     ` Paulo Zanoni
2012-10-24 16:43       ` Daniel Vetter
2012-10-24 17:59   ` Paulo Zanoni
2012-10-25 10:23     ` Lespiau, Damien
2012-10-23 20:29 ` [PATCH 06/18] drm/i915: convert PIPE_CLK_SEL to transcoder Paulo Zanoni
2012-10-24 14:55   ` Lespiau, Damien
2012-10-23 20:29 ` [PATCH 07/18] drm/i915: convert DDI_FUNC_CTL " Paulo Zanoni
2012-10-24 15:12   ` Lespiau, Damien
2012-10-24 15:30   ` Lespiau, Damien
2012-10-24 16:44     ` Paulo Zanoni
2012-10-24 18:06   ` Paulo Zanoni
2012-10-25 10:24     ` Lespiau, Damien
2012-10-23 20:29 ` [PATCH 08/18] drm/i915: check TRANSCODER_EDP on intel_modeset_setup_hw_state Paulo Zanoni
2012-10-24 12:38   ` Daniel Vetter
2012-10-24 15:45     ` Lespiau, Damien
2012-10-24 15:50       ` Daniel Vetter
2012-10-24 18:09   ` Paulo Zanoni
2012-10-25 10:26     ` Lespiau, Damien
2012-10-23 20:29 ` [PATCH 09/18] drm/i915: convert PIPECONF to use transcoder instead of pipe Paulo Zanoni
2012-10-25 11:12   ` Lespiau, Damien
2012-10-23 20:30 ` Paulo Zanoni [this message]
2012-10-25 11:09   ` [PATCH 10/18] drm/i915: convert PIPE_MSA_MISC to transcoder Lespiau, Damien
2012-10-23 20:30 ` [PATCH 11/18] drm/i915: convert CPU M/N timings " Paulo Zanoni
2012-10-25 11:10   ` Lespiau, Damien
2012-10-23 20:30 ` [PATCH 12/18] drm/i915: convert pipe timing definitions " Paulo Zanoni
2012-10-25 11:12   ` Lespiau, Damien
2012-10-23 20:30 ` [PATCH 13/18] drm/i915: implement workaround for VTOTAL when using TRANSCODER_EDP Paulo Zanoni
2012-10-23 20:44   ` Daniel Vetter
2012-10-24 13:34   ` Paulo Zanoni
2012-10-24 15:24     ` Rodrigo Vivi
2012-10-23 20:30 ` [PATCH 14/18] drm/i915: select the correct pipe " Paulo Zanoni
2012-10-24 13:58   ` Rodrigo Vivi
2012-10-23 20:30 ` [PATCH 15/18] drm/i915: set the correct eDP aux channel clock divider on DDI Paulo Zanoni
2012-10-24 14:07   ` Rodrigo Vivi
2012-10-23 20:30 ` [PATCH 16/18] drm/i915: set/unset the DDI eDP backlight Paulo Zanoni
2012-10-24 14:11   ` Rodrigo Vivi
2012-10-24 14:22   ` Daniel Vetter
2012-10-24 14:43     ` Paulo Zanoni
2012-10-23 20:30 ` [PATCH 17/18] drm/i915: turn the eDP DDI panel on/off Paulo Zanoni
2012-10-24 15:20   ` Rodrigo Vivi
2012-10-23 20:30 ` [PATCH 18/18] drm/i915: enable DDI eDP Paulo Zanoni
2012-10-24 14:24   ` Rodrigo Vivi
2012-10-25 20:17     ` Daniel Vetter
2012-10-24 13:31 ` [PATCH 02-1/18] drm/i915: fix checks inside ironlake_crtc_{enable, disable} Paulo Zanoni
2012-10-24 13:32   ` [PATCH 02-2/18] drm/i915: fix checks inside haswell_crtc_{enable, disable} Paulo Zanoni
2012-10-25 11:07     ` Jani Nikula
2012-10-25 11:04   ` [PATCH 02-1/18] drm/i915: fix checks inside ironlake_crtc_{enable, disable} Jani Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351024208-3489-11-git-send-email-przanoni@gmail.com \
    --to=przanoni@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.