From: Simon Horman <horms@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/8] ARM: shmobile: kzm9g: enable magnetometer ak8975.
Date: Thu, 01 Nov 2012 00:40:04 +0000 [thread overview]
Message-ID: <1351730411-1874-2-git-send-email-horms@verge.net.au> (raw)
In-Reply-To: <1351730411-1874-1-git-send-email-horms@verge.net.au>
From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
This patch enables magnetometer ak8975.
I checked ak8975_probe() returns successfully.
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
arch/arm/configs/kzm9g_defconfig | 2 ++
arch/arm/mach-shmobile/board-kzm9g.c | 6 +++++-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index c88b578..1404b04 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -119,6 +119,8 @@ CONFIG_DMADEVICES=y
CONFIG_SH_DMAE=y
CONFIG_ASYNC_TX_DMA=y
CONFIG_STAGING=y
+CONFIG_SENSORS_AK8975=y
+CONFIG_IIO=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_VFAT_FS=y
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 0a43f31..a37da78 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -557,7 +557,11 @@ static struct i2c_board_info i2c0_devices[] = {
},
{
I2C_BOARD_INFO("r2025sd", 0x32),
- }
+ },
+ {
+ I2C_BOARD_INFO("ak8975", 0x0c),
+ .irq = intcs_evt2irq(0x3380), /* IRQ28 */
+ },
};
static struct i2c_board_info i2c1_devices[] = {
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/8] ARM: shmobile: kzm9g: enable magnetometer ak8975.
Date: Thu, 1 Nov 2012 08:40:04 +0800 [thread overview]
Message-ID: <1351730411-1874-2-git-send-email-horms@verge.net.au> (raw)
In-Reply-To: <1351730411-1874-1-git-send-email-horms@verge.net.au>
From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
This patch enables magnetometer ak8975.
I checked ak8975_probe() returns successfully.
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
arch/arm/configs/kzm9g_defconfig | 2 ++
arch/arm/mach-shmobile/board-kzm9g.c | 6 +++++-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index c88b578..1404b04 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -119,6 +119,8 @@ CONFIG_DMADEVICES=y
CONFIG_SH_DMAE=y
CONFIG_ASYNC_TX_DMA=y
CONFIG_STAGING=y
+CONFIG_SENSORS_AK8975=y
+CONFIG_IIO=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_VFAT_FS=y
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 0a43f31..a37da78 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -557,7 +557,11 @@ static struct i2c_board_info i2c0_devices[] = {
},
{
I2C_BOARD_INFO("r2025sd", 0x32),
- }
+ },
+ {
+ I2C_BOARD_INFO("ak8975", 0x0c),
+ .irq = intcs_evt2irq(0x3380), /* IRQ28 */
+ },
};
static struct i2c_board_info i2c1_devices[] = {
--
1.7.10.4
next prev parent reply other threads:[~2012-11-01 0:40 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-01 0:40 [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 Simon Horman
2012-11-01 0:40 ` Simon Horman
2012-11-01 0:40 ` Simon Horman [this message]
2012-11-01 0:40 ` [PATCH 1/8] ARM: shmobile: kzm9g: enable magnetometer ak8975 Simon Horman
2012-11-01 0:40 ` [PATCH 2/8] ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345 Simon Horman
2012-11-01 0:40 ` Simon Horman
2012-11-01 0:40 ` [PATCH 3/8] ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2 Simon Horman
2012-11-01 0:40 ` Simon Horman
2012-11-01 0:40 ` [PATCH 4/8] ARM: shmobile: armadillo800eva: enable restart Simon Horman
2012-11-01 0:40 ` Simon Horman
2012-11-01 0:40 ` [PATCH 5/8] ARM: shmobile: marzen: add HSPI support Simon Horman
2012-11-01 0:40 ` Simon Horman
2012-11-01 0:40 ` [PATCH 6/8] ARM: mach-shmobile: Use DT_MACHINE for mackerel Simon Horman
2012-11-01 0:40 ` Simon Horman
2012-11-01 0:40 ` [PATCH 7/8] ARM: shmobile: Remove G3EVM machine support Simon Horman
2012-11-01 0:40 ` Simon Horman
2012-11-01 0:40 ` [PATCH 8/8] ARM: shmobile: Remove G4EVM " Simon Horman
2012-11-01 0:40 ` Simon Horman
2012-11-06 2:32 ` [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 Simon Horman
2012-11-06 2:32 ` Simon Horman
2012-11-06 14:07 ` Olof Johansson
2012-11-06 14:07 ` Olof Johansson
2012-11-09 7:31 ` [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 #2 Simon Horman
2012-11-09 7:31 ` Simon Horman
2012-11-09 7:31 ` [PATCH 1/7] ARM: shmobile: marzen: add USB phy support Simon Horman
2012-11-09 7:31 ` Simon Horman
2013-03-13 21:19 ` Sergei Shtylyov
2013-03-13 22:20 ` Sergei Shtylyov
2013-03-14 0:44 ` Kuninori Morimoto
2013-03-14 0:44 ` Kuninori Morimoto
2013-03-14 13:20 ` Sergei Shtylyov
2013-03-14 13:20 ` Sergei Shtylyov
2012-11-09 7:31 ` [PATCH 2/7] ARM: shmobile: marzen: add USB EHCI driver support Simon Horman
2012-11-09 7:31 ` Simon Horman
2013-03-13 20:44 ` Sergei Shtylyov
2013-03-13 21:45 ` Sergei Shtylyov
2013-03-14 0:29 ` Kuninori Morimoto
2013-03-14 0:29 ` Kuninori Morimoto
2013-03-14 1:09 ` Kuninori Morimoto
2013-03-14 1:09 ` Kuninori Morimoto
2013-03-14 13:42 ` Sergei Shtylyov
2013-03-14 13:42 ` Sergei Shtylyov
2013-03-15 0:52 ` Kuninori Morimoto
2013-03-15 0:52 ` Kuninori Morimoto
2013-03-15 12:51 ` Sergei Shtylyov
2013-03-15 12:51 ` Sergei Shtylyov
2012-11-09 7:31 ` [PATCH 3/7] ARM: shmobile: marzen: add USB OHCI " Simon Horman
2012-11-09 7:31 ` Simon Horman
2012-11-09 7:31 ` [PATCH 4/7] ARM: shmobile: mackerel: enable DMAEngine on USB Host Simon Horman
2012-11-09 7:31 ` Simon Horman
2012-11-09 7:31 ` [PATCH 5/7] ARM: shmobile: use FSI driver's audio clock on armadillo800eva Simon Horman
2012-11-09 7:31 ` Simon Horman
2012-11-09 7:31 ` [PATCH 6/7] ARM: shmobile: use FSI driver's audio clock on mackerel Simon Horman
2012-11-09 7:31 ` Simon Horman
2012-11-09 7:31 ` [PATCH 7/7] ARM: shmobile: use FSI driver's audio clock on ap4evb Simon Horman
2012-11-09 7:31 ` Simon Horman
2012-11-12 21:11 ` [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 #2 Arnd Bergmann
2012-11-12 21:11 ` Arnd Bergmann
2012-11-13 2:58 ` Simon Horman
2012-11-13 2:58 ` Simon Horman
2012-11-13 5:36 ` Mark Brown
2012-11-13 5:36 ` Mark Brown
2012-11-13 8:48 ` Arnd Bergmann
2012-11-13 8:48 ` Arnd Bergmann
2012-11-13 10:01 ` Mark Brown
2012-11-13 10:01 ` Mark Brown
2012-11-13 10:27 ` Arnd Bergmann
2012-11-13 10:27 ` Arnd Bergmann
2012-11-14 2:15 ` Mark Brown
2012-11-14 2:15 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351730411-1874-2-git-send-email-horms@verge.net.au \
--to=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.