All of lore.kernel.org
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: tony@atomide.com
Cc: b-cousson@ti.com, balbi@ti.com, keshava_mgowda@ti.com,
	linux-omap@vger.kernel.org, linux-usb@vger.kernel.org,
	rogerq@ti.com
Subject: [PATCH 2/4] ARM: OMAP4: USB: Add pin mux configuration for panda board
Date: Thu, 15 Nov 2012 16:56:34 +0200	[thread overview]
Message-ID: <1352991396-19589-3-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1352991396-19589-1-git-send-email-rogerq@ti.com>

From: Keshava Munegowda <keshava_mgowda@ti.com>

The port1 of omap4 panda board is used in ULPI PHY mode.
The pin mux of usbhs (usbb1) port 1 is configured accordingly.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
---
 arch/arm/boot/dts/omap4-panda.dts |   18 ++++++++++++++++++
 1 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index e8f927c..6811b37 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -65,6 +65,7 @@
 			&twl6040_pins
 			&mcpdm_pins
 			&mcbsp1_pins
+			&usbb1_pins	/* port 0 of omap usb host port pin mux configuration */
 	>;
 
 	twl6040_pins: pinmux_twl6040_pins {
@@ -92,6 +93,23 @@
 			0xc4 0x100	/* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
 		>;
 	};
+
+	usbb1_pins: pinmux_usbb1_pins {
+		pinctrl-single,pins = <
+			0x82 0x10C  /* USBB1_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk INPUT | PULLDOWN */
+			0x84 0x4  /* USBB1_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */
+			0x86 0x104  /* USBB1_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */
+			0x88 0x104  /* USBB1_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */
+			0x8a 0x104  /* USBB1_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */
+			0x8c 0x104  /* USBB1_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */
+			0x8e 0x104  /* USBB1_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */
+			0x90 0x104  /* USBB1_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */
+			0x92 0x104  /* USBB1_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */
+			0x94 0x104  /* USBB1_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */
+			0x96 0x104  /* USBB1_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */
+			0x98 0x104  /* USBB1_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */
+		>;
+	};
 };
 
 &i2c1 {
-- 
1.7.4.1


  reply	other threads:[~2012-11-15 14:56 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-15 14:56 [PATCH 0/4] Device tree support for OMAP USB Host Roger Quadros
2012-11-15 14:56 ` Roger Quadros [this message]
     [not found] ` <1352991396-19589-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2012-11-15 14:56   ` [PATCH 1/4] ARM: OMAP: usb-host: Device tree support for " Roger Quadros
2012-11-16 10:30     ` Benoit Cousson
2012-11-16 10:55       ` Roger Quadros
2012-11-16 11:06         ` Benoit Cousson
2012-11-16 12:05           ` Roger Quadros
2012-11-15 14:56   ` [PATCH 3/4] ARM/dts: omap4-panda: Add USB Host support Roger Quadros
2012-11-15 14:56   ` [PATCH 4/4] regulator: fixed: Properly use input_supply parameter from device tree Roger Quadros
     [not found]     ` <1352991396-19589-5-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2012-11-15 19:11       ` Laxman Dewangan
     [not found]         ` <50A53E7F.6070705-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-11-16 10:23           ` Roger Quadros
2012-12-15 14:55             ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1352991396-19589-3-git-send-email-rogerq@ti.com \
    --to=rogerq@ti.com \
    --cc=b-cousson@ti.com \
    --cc=balbi@ti.com \
    --cc=keshava_mgowda@ti.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.