All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jason Wang <jasowang@redhat.com>
To: rusty@rustcorp.com.au, mst@redhat.com, krkumar2@in.ibm.com,
	virtualization@lists.linux-foundation.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: kvm@vger.kernel.org, bhutchings@solarflare.com,
	jwhan@filewood.snu.ac.kr, shiyer@redhat.com,
	Jason Wang <jasowang@redhat.com>
Subject: [net-next rfc v7 3/3] virtio-net: change the number of queues through ethtool
Date: Tue, 27 Nov 2012 18:16:00 +0800	[thread overview]
Message-ID: <1354011360-39479-4-git-send-email-jasowang@redhat.com> (raw)
In-Reply-To: <1354011360-39479-1-git-send-email-jasowang@redhat.com>

This patch implement the {set|get}_channels method of ethool to allow user to
change the number of queues dymaically when the device is running. This would
let the user to configure it on demand.

Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 drivers/net/virtio_net.c |   41 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 41 insertions(+), 0 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index bcaa6e5..f08ec2a 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1578,10 +1578,51 @@ static struct virtio_driver virtio_net_driver = {
 #endif
 };
 
+/* TODO: Eliminate OOO packets during switching */
+static int virtnet_set_channels(struct net_device *dev,
+				struct ethtool_channels *channels)
+{
+	struct virtnet_info *vi = netdev_priv(dev);
+	u16 queue_pairs = channels->combined_count;
+
+	/* We don't support separate rx/tx channels.
+	 * We don't allow setting 'other' channels.
+	 */
+	if (channels->rx_count || channels->tx_count || channels->other_count)
+		return -EINVAL;
+
+	/* Only two modes were support currently */
+	if (queue_pairs != vi->max_queue_pairs && queue_pairs != 1)
+		return -EINVAL;
+
+	vi->curr_queue_pairs = queue_pairs;
+	BUG_ON(virtnet_set_queues(vi));
+
+	netif_set_real_num_tx_queues(dev, vi->curr_queue_pairs);
+	netif_set_real_num_rx_queues(dev, vi->curr_queue_pairs);
+
+	return 0;
+}
+
+static void virtnet_get_channels(struct net_device *dev,
+				 struct ethtool_channels *channels)
+{
+	struct virtnet_info *vi = netdev_priv(dev);
+
+	channels->combined_count = vi->curr_queue_pairs;
+	channels->max_combined = vi->max_queue_pairs;
+	channels->max_other = 0;
+	channels->rx_count = 0;
+	channels->tx_count = 0;
+	channels->other_count = 0;
+}
+
 static const struct ethtool_ops virtnet_ethtool_ops = {
 	.get_drvinfo = virtnet_get_drvinfo,
 	.get_link = ethtool_op_get_link,
 	.get_ringparam = virtnet_get_ringparam,
+	.set_channels = virtnet_set_channels,
+	.get_channels = virtnet_get_channels,
 };
 
 static int __init init(void)
-- 
1.7.1


WARNING: multiple messages have this Message-ID (diff)
From: Jason Wang <jasowang@redhat.com>
To: rusty@rustcorp.com.au, mst@redhat.com, krkumar2@in.ibm.com,
	virtualization@lists.linux-foundation.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: bhutchings@solarflare.com, jwhan@filewood.snu.ac.kr,
	shiyer@redhat.com, kvm@vger.kernel.org
Subject: [net-next rfc v7 3/3] virtio-net: change the number of queues through ethtool
Date: Tue, 27 Nov 2012 18:16:00 +0800	[thread overview]
Message-ID: <1354011360-39479-4-git-send-email-jasowang@redhat.com> (raw)
In-Reply-To: <1354011360-39479-1-git-send-email-jasowang@redhat.com>

This patch implement the {set|get}_channels method of ethool to allow user to
change the number of queues dymaically when the device is running. This would
let the user to configure it on demand.

Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 drivers/net/virtio_net.c |   41 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 41 insertions(+), 0 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index bcaa6e5..f08ec2a 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1578,10 +1578,51 @@ static struct virtio_driver virtio_net_driver = {
 #endif
 };
 
+/* TODO: Eliminate OOO packets during switching */
+static int virtnet_set_channels(struct net_device *dev,
+				struct ethtool_channels *channels)
+{
+	struct virtnet_info *vi = netdev_priv(dev);
+	u16 queue_pairs = channels->combined_count;
+
+	/* We don't support separate rx/tx channels.
+	 * We don't allow setting 'other' channels.
+	 */
+	if (channels->rx_count || channels->tx_count || channels->other_count)
+		return -EINVAL;
+
+	/* Only two modes were support currently */
+	if (queue_pairs != vi->max_queue_pairs && queue_pairs != 1)
+		return -EINVAL;
+
+	vi->curr_queue_pairs = queue_pairs;
+	BUG_ON(virtnet_set_queues(vi));
+
+	netif_set_real_num_tx_queues(dev, vi->curr_queue_pairs);
+	netif_set_real_num_rx_queues(dev, vi->curr_queue_pairs);
+
+	return 0;
+}
+
+static void virtnet_get_channels(struct net_device *dev,
+				 struct ethtool_channels *channels)
+{
+	struct virtnet_info *vi = netdev_priv(dev);
+
+	channels->combined_count = vi->curr_queue_pairs;
+	channels->max_combined = vi->max_queue_pairs;
+	channels->max_other = 0;
+	channels->rx_count = 0;
+	channels->tx_count = 0;
+	channels->other_count = 0;
+}
+
 static const struct ethtool_ops virtnet_ethtool_ops = {
 	.get_drvinfo = virtnet_get_drvinfo,
 	.get_link = ethtool_op_get_link,
 	.get_ringparam = virtnet_get_ringparam,
+	.set_channels = virtnet_set_channels,
+	.get_channels = virtnet_get_channels,
 };
 
 static int __init init(void)
-- 
1.7.1

  parent reply	other threads:[~2012-11-27 10:24 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-27 10:15 [net-next rfc v7 0/3] Multiqueue virtio-net Jason Wang
2012-11-27 10:15 ` Jason Wang
2012-11-27 10:15 ` [net-next rfc v7 1/3] virtio-net: separate fields of sending/receiving queue from virtnet_info Jason Wang
2012-11-27 10:15   ` Jason Wang
2012-12-03  1:55   ` Rusty Russell
2012-12-03  1:55     ` Rusty Russell
2012-12-03  5:15     ` Jason Wang
2012-12-03 11:18       ` Michael S. Tsirkin
2012-12-03 11:18         ` Michael S. Tsirkin
2012-12-04  9:22         ` Jason Wang
2012-12-04  9:22           ` Jason Wang
2012-12-04  3:43       ` Rusty Russell
2012-12-04  3:43         ` Rusty Russell
2012-12-04  9:23         ` Jason Wang
2012-12-04  9:23           ` Jason Wang
2012-11-27 10:15 ` [net-next rfc v7 2/3] virtio_net: multiqueue support Jason Wang
2012-11-27 10:15   ` Jason Wang
2012-12-02 16:06   ` Michael S. Tsirkin
2012-12-03  5:47     ` Jason Wang
2012-12-03  5:47       ` Jason Wang
2012-12-02 16:06   ` Michael S. Tsirkin
2012-12-03  2:04   ` Rusty Russell
2012-12-03  2:04     ` Rusty Russell
2012-12-03  6:05     ` Jason Wang
2012-12-03  6:05       ` Jason Wang
2012-12-03  9:47       ` Michael S. Tsirkin
2012-12-03  9:47         ` Michael S. Tsirkin
2012-12-03 10:01         ` Jason Wang
2012-12-03 10:01           ` Jason Wang
2012-12-03 11:11           ` Michael S. Tsirkin
2012-12-04  9:24             ` Jason Wang
2012-12-04  9:24               ` Jason Wang
2012-12-03 11:11           ` Michael S. Tsirkin
2012-12-03 10:14   ` Michael S. Tsirkin
2012-12-03 10:14   ` Michael S. Tsirkin
2012-12-03 10:30     ` Jason Wang
2012-12-03 10:30       ` Jason Wang
2012-12-03 11:00       ` Michael S. Tsirkin
2012-12-03 11:00         ` Michael S. Tsirkin
2012-12-04  7:35       ` Michael S. Tsirkin
2012-12-04  7:35         ` Michael S. Tsirkin
2012-12-04  9:27         ` Jason Wang
2012-12-04  9:27           ` Jason Wang
2012-11-27 10:16 ` Jason Wang [this message]
2012-11-27 10:16   ` [net-next rfc v7 3/3] virtio-net: change the number of queues through ethtool Jason Wang
2012-12-02 16:09   ` Michael S. Tsirkin
2012-12-02 16:09     ` Michael S. Tsirkin
2012-12-03  6:09     ` Jason Wang
2012-12-03  6:09       ` Jason Wang
2012-12-03 11:25       ` Michael S. Tsirkin
2012-12-03 11:25         ` Michael S. Tsirkin
2012-12-04  0:22         ` Ben Hutchings
2012-12-04  0:22           ` Ben Hutchings

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1354011360-39479-4-git-send-email-jasowang@redhat.com \
    --to=jasowang@redhat.com \
    --cc=bhutchings@solarflare.com \
    --cc=jwhan@filewood.snu.ac.kr \
    --cc=krkumar2@in.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=rusty@rustcorp.com.au \
    --cc=shiyer@redhat.com \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.