[PATCH v2 13/20] arm: kirkwood: mplcec4: use Device Tree to probe SDIO

[thomas.petazzoni@free-electrons.com (Thomas Petazzoni)]

Now that the mvsdio driver has a Device Tree binding, and the SDIO
controller is declared in kirkwood.dtsi, migrate the mplcec4 board to
use the Device Tree to probe the SDIO controller and to mux the pins
of the SDIO interface correctly.

This patch has not been tested, it remains to be tested by a person
having access to the hardware.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Stefan Peter <s.peter@mpl.ch>
---
Changes since v1:
 * Remove the useless header inclusion from board-mplcec4.c, now
   that the SDIO interface is probed from the Device Tree.
 * Reference the pmx_sdio muxing option from the DT node describing
   the SDIO interface, in order to get proper muxing of this
   interface.
---
 arch/arm/boot/dts/kirkwood-mplcec4.dts |   11 +++++++++--
 arch/arm/mach-kirkwood/board-mplcec4.c |    7 -------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index 262c654..662dfd8 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -20,12 +20,11 @@
 		pinctrl: pinctrl at 10000 {
 
 			pinctrl-0 = < &pmx_nand &pmx_uart0
-				      &pmx_led_health &pmx_sdio
+				      &pmx_led_health
 				      &pmx_sata0 &pmx_sata1
 				      &pmx_led_user1o
 				      &pmx_led_user1g &pmx_led_user0o
 				      &pmx_led_user0g &pmx_led_misc
-				      &pmx_sdio_cd
 				    >;
 			pinctrl-names = "default";
 
@@ -133,6 +132,14 @@
 			status = "okay";
 
 		};
+
+		mvsdio at 90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio1 15 0>;
+			/* No WP GPIO */
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
index 56bfe5a..73a0332 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -24,11 +23,6 @@ static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(2),
 };
 
-static struct mvsdio_platform_data mplcec4_mvsdio_data = {
-	.gpio_card_detect = 47,	/* MPP47 used as SD card detect */
-};
-
-
 void __init mplcec4_init(void)
 {
 	/*
@@ -36,7 +30,6 @@ void __init mplcec4_init(void)
 	 */
 	kirkwood_ge00_init(&mplcec4_ge00_data);
 	kirkwood_ge01_init(&mplcec4_ge01_data);
-	kirkwood_sdio_init(&mplcec4_mvsdio_data);
 	kirkwood_pcie_init(KW_PCIE0);
 }
 
-- 
1.7.9.5