[PATCH 11/22] drm/i915: fixup port enumeration on VLV

[Jesse Barnes <jbarnes@virtuousgeek.org>]

From: Vijay Purushothaman <vijay.a.purushothaman@intel.com>

Updated to reflect newer boards.

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
---
 drivers/gpu/drm/i915/intel_display.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c8a9b7d..9f2f817 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8092,7 +8092,8 @@ static void intel_setup_outputs(struct drm_device *dev)
 		 * IMP : To route DP in PORT_B in VLV X0 board, make sure to remove the
 		 * jumper from J3K1
 		 */
-		intel_dp_init(dev, DP_B, PORT_B);
+		// Only for testing - Vijay
+		//intel_dp_init(dev, DP_B, PORT_B);
 
 		/*
 		 * To get HDMI output on VLV X0, comment the above line (intel_dp_init)
@@ -8101,13 +8102,13 @@ static void intel_setup_outputs(struct drm_device *dev)
 		 * IMP : To route HDMI in PORT_B in VLV X0 board, make sure to connect
 		 * the jumper in J3K1
 		 */
-		/* intel_hdmi_init(dev, SDVOB, PORT_B); */
+		intel_hdmi_init(dev, SDVOB, PORT_B);
 
 		/*
 		 * For VLV X0, the eDP is supported on PORT_C after rework.
 		 * Uncomment the following line if the board is reworked for eDP
 		 */
-		/* intel_dp_init(dev, DP_C, PORT_C); */
+		intel_dp_init(dev, DP_C, PORT_C);
 	} else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
 		bool found = false;
 
-- 
1.7.9.5