From: Andrew Lunn <andrew@lunn.ch>
To: Jason Cooper <jason@lakedaemon.net>, rui.zhang@intel.com
Cc: linux ARM <linux-arm-kernel@lists.infradead.org>,
linux-pm@vger.kernel.org,
Nobuhiro Iwamatsu <iwamatsu@nigauri.org>,
Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH v3 2/4] ARM: Kirkwood: Add support thermal sensor for 88F6282 and 88F6283
Date: Sat, 2 Feb 2013 15:35:47 +0100 [thread overview]
Message-ID: <1359815749-27705-3-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1359815749-27705-1-git-send-email-andrew@lunn.ch>
From: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Kirkwood 88F6282 and 88F6283 have a thermal sensor.
This patch adds a DT node and enables the driver in the kernel config.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/boot/dts/kirkwood-6282.dtsi | 6 ++++++
arch/arm/configs/kirkwood_defconfig | 2 ++
2 files changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 4ccea21..bd168b6 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -32,6 +32,12 @@
};
};
+ thermal@10078 {
+ compatible = "marvell,kirkwood-thermal";
+ reg = <0x10078 0x4>;
+ status = "okay";
+ };
+
i2c@11100 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11100 0x20>;
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 93f3794..3d8667f 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -118,6 +118,8 @@ CONFIG_SPI=y
CONFIG_SPI_ORION=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_KIRKWOOD_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_ORION_WATCHDOG=y
CONFIG_HID_DRAGONRISE=y
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/4] ARM: Kirkwood: Add support thermal sensor for 88F6282 and 88F6283
Date: Sat, 2 Feb 2013 15:35:47 +0100 [thread overview]
Message-ID: <1359815749-27705-3-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1359815749-27705-1-git-send-email-andrew@lunn.ch>
From: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Kirkwood 88F6282 and 88F6283 have a thermal sensor.
This patch adds a DT node and enables the driver in the kernel config.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/boot/dts/kirkwood-6282.dtsi | 6 ++++++
arch/arm/configs/kirkwood_defconfig | 2 ++
2 files changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 4ccea21..bd168b6 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -32,6 +32,12 @@
};
};
+ thermal at 10078 {
+ compatible = "marvell,kirkwood-thermal";
+ reg = <0x10078 0x4>;
+ status = "okay";
+ };
+
i2c at 11100 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11100 0x20>;
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 93f3794..3d8667f 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -118,6 +118,8 @@ CONFIG_SPI=y
CONFIG_SPI_ORION=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_KIRKWOOD_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_ORION_WATCHDOG=y
CONFIG_HID_DRAGONRISE=y
--
1.7.10.4
next prev parent reply other threads:[~2013-02-02 14:36 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-02 14:35 [PATCH v3 0/4] Kirkwood and Dove Thermal drivers Andrew Lunn
2013-02-02 14:35 ` Andrew Lunn
2013-02-02 14:35 ` [PATCH v3 1/4] thermal: Add support for the thermal sensor on Kirkwood SoCs Andrew Lunn
2013-02-02 14:35 ` Andrew Lunn
2013-02-04 2:49 ` Zhang Rui
2013-02-04 2:49 ` Zhang Rui
2013-02-04 19:19 ` [PATCH v4 0/4] Kirkwood and Dove Thermal drivers Andrew Lunn
2013-02-04 19:19 ` Andrew Lunn
2013-02-04 19:19 ` [PATCH v4 1/4] thermal: Add support for the thermal sensor on Kirkwood SoCs Andrew Lunn
2013-02-04 19:19 ` Andrew Lunn
2013-02-05 17:10 ` Ezequiel Garcia
2013-02-05 17:10 ` Ezequiel Garcia
2013-02-04 19:19 ` [PATCH v4 2/4] ARM: Kirkwood: Add support thermal sensor for 88F6282 and 88F6283 Andrew Lunn
2013-02-04 19:19 ` Andrew Lunn
2013-02-04 19:19 ` [PATCH v4 3/4] Thermal: Dove: Add Themal sensor support for Dove Andrew Lunn
2013-02-04 19:19 ` Andrew Lunn
2013-02-05 17:09 ` Ezequiel Garcia
2013-02-05 17:09 ` Ezequiel Garcia
2013-02-05 17:32 ` Andrew Lunn
2013-02-05 17:32 ` Andrew Lunn
2013-02-04 19:19 ` [PATCH v4 4/4] Dove: Thermal: Add DT node and enable in defconfig Andrew Lunn
2013-02-04 19:19 ` Andrew Lunn
2013-02-02 14:35 ` Andrew Lunn [this message]
2013-02-02 14:35 ` [PATCH v3 2/4] ARM: Kirkwood: Add support thermal sensor for 88F6282 and 88F6283 Andrew Lunn
2013-02-04 3:14 ` Zhang Rui
2013-02-04 3:14 ` Zhang Rui
2013-02-04 14:19 ` Jason Cooper
2013-02-04 14:19 ` Jason Cooper
2013-02-08 7:31 ` Zhang Rui
2013-02-08 7:31 ` Zhang Rui
2013-02-08 14:33 ` Jason Cooper
2013-02-08 14:33 ` Jason Cooper
2013-02-02 14:35 ` [PATCH v3 3/4] Thermal: Dove: Add Themal sensor support for Dove Andrew Lunn
2013-02-02 14:35 ` Andrew Lunn
2013-02-02 14:35 ` [PATCH v3 4/4] Dove: Thermal: Add DT node and enable in defconfig Andrew Lunn
2013-02-02 14:35 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359815749-27705-3-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=iwamatsu@nigauri.org \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.