All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sourav Poddar <sourav.poddar@ti.com>
To: <b-cousson@ti.com>, <tony@atomide.com>, <linux@arm.linux.org.uk>,
	<linux-omap@vger.kernel.org>,
	<devicetree-discuss@lists.ozlabs.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <balbi@ti.com>,
	<santosh.shilimkar@ti.com>
Cc: Sourav Poddar <sourav.poddar@ti.com>
Subject: [PATCHv2 2/2] arm: dts: omap5-evm: Add mcspi data
Date: Mon, 4 Feb 2013 14:22:18 +0530	[thread overview]
Message-ID: <1359967938-26718-1-git-send-email-sourav.poddar@ti.com> (raw)

Add mcspi node and pinmux data for omap5 mcspi controller.

Tested on omap5430 evm with 3.8-rc4 custom kernel.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
---
v1->v2
Pinctrl nodes were pointing to a different parent.
Fixing the same.
 arch/arm/boot/dts/omap5-evm.dts |   46 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 46 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index 8722c15..3625c5c 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -80,6 +80,33 @@
 			0x15a 0x100	/* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */
 		>;
 	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			0xbc 0x100
+			0xbe 0x100
+			0xc0 0x118
+			0xc2 0x0
+		>;
+	};
+
+	mcspi3_pins: pinmux_mcspi3_pins {
+		pinctrl-single,pins = <
+			0x78 0x101
+			0x7a 0x101
+			0x7c 0x101
+			0x7e 0x101
+		>;
+	};
+
+	mcspi4_pins: pinmux_mcspi4_pins {
+		pinctrl-single,pins = <
+			0x164 0x101
+			0x168 0x101
+			0x16a 0x101
+			0x16c 0x101
+		>;
+	};
 };
 
 &mmc1 {
@@ -151,3 +178,22 @@
 	cs1-used;
 	device-handle = <&samsung_K3PE0E000B>;
 };
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+};
+
+&mcspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi4_pins>;
+};
-- 
1.7.1


WARNING: multiple messages have this Message-ID (diff)
From: Sourav Poddar <sourav.poddar@ti.com>
To: b-cousson@ti.com, tony@atomide.com, linux@arm.linux.org.uk,
	linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, balbi@ti.com,
	santosh.shilimkar@ti.com
Cc: Sourav Poddar <sourav.poddar@ti.com>
Subject: [PATCHv2 2/2] arm: dts: omap5-evm: Add mcspi data
Date: Mon, 4 Feb 2013 14:22:18 +0530	[thread overview]
Message-ID: <1359967938-26718-1-git-send-email-sourav.poddar@ti.com> (raw)

Add mcspi node and pinmux data for omap5 mcspi controller.

Tested on omap5430 evm with 3.8-rc4 custom kernel.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
---
v1->v2
Pinctrl nodes were pointing to a different parent.
Fixing the same.
 arch/arm/boot/dts/omap5-evm.dts |   46 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 46 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index 8722c15..3625c5c 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -80,6 +80,33 @@
 			0x15a 0x100	/* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */
 		>;
 	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			0xbc 0x100
+			0xbe 0x100
+			0xc0 0x118
+			0xc2 0x0
+		>;
+	};
+
+	mcspi3_pins: pinmux_mcspi3_pins {
+		pinctrl-single,pins = <
+			0x78 0x101
+			0x7a 0x101
+			0x7c 0x101
+			0x7e 0x101
+		>;
+	};
+
+	mcspi4_pins: pinmux_mcspi4_pins {
+		pinctrl-single,pins = <
+			0x164 0x101
+			0x168 0x101
+			0x16a 0x101
+			0x16c 0x101
+		>;
+	};
 };
 
 &mmc1 {
@@ -151,3 +178,22 @@
 	cs1-used;
 	device-handle = <&samsung_K3PE0E000B>;
 };
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+};
+
+&mcspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi4_pins>;
+};
-- 
1.7.1


WARNING: multiple messages have this Message-ID (diff)
From: sourav.poddar@ti.com (Sourav Poddar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 2/2] arm: dts: omap5-evm: Add mcspi data
Date: Mon, 4 Feb 2013 14:22:18 +0530	[thread overview]
Message-ID: <1359967938-26718-1-git-send-email-sourav.poddar@ti.com> (raw)

Add mcspi node and pinmux data for omap5 mcspi controller.

Tested on omap5430 evm with 3.8-rc4 custom kernel.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
---
v1->v2
Pinctrl nodes were pointing to a different parent.
Fixing the same.
 arch/arm/boot/dts/omap5-evm.dts |   46 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 46 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index 8722c15..3625c5c 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -80,6 +80,33 @@
 			0x15a 0x100	/* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */
 		>;
 	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			0xbc 0x100
+			0xbe 0x100
+			0xc0 0x118
+			0xc2 0x0
+		>;
+	};
+
+	mcspi3_pins: pinmux_mcspi3_pins {
+		pinctrl-single,pins = <
+			0x78 0x101
+			0x7a 0x101
+			0x7c 0x101
+			0x7e 0x101
+		>;
+	};
+
+	mcspi4_pins: pinmux_mcspi4_pins {
+		pinctrl-single,pins = <
+			0x164 0x101
+			0x168 0x101
+			0x16a 0x101
+			0x16c 0x101
+		>;
+	};
 };
 
 &mmc1 {
@@ -151,3 +178,22 @@
 	cs1-used;
 	device-handle = <&samsung_K3PE0E000B>;
 };
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+};
+
+&mcspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi4_pins>;
+};
-- 
1.7.1

             reply	other threads:[~2013-02-04  8:52 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-04  8:52 Sourav Poddar [this message]
2013-02-04  8:52 ` [PATCHv2 2/2] arm: dts: omap5-evm: Add mcspi data Sourav Poddar
2013-02-04  8:52 ` Sourav Poddar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359967938-26718-1-git-send-email-sourav.poddar@ti.com \
    --to=sourav.poddar@ti.com \
    --cc=b-cousson@ti.com \
    --cc=balbi@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=santosh.shilimkar@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.