From: Thomas Abraham <thomas.abraham@linaro.org> To: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org, mturquette@linaro.org, kgene.kim@samsung.com, t.figa@samsung.com, sylvester.nawrocki@gmail.com Subject: [PATCH v6 15/16] ARM: dts: add clock provider information for all controllers in Exynos5440 SoC Date: Mon, 18 Feb 2013 13:51:25 +0530 [thread overview] Message-ID: <1361175686-19400-16-git-send-email-thomas.abraham@linaro.org> (raw) In-Reply-To: <1361175686-19400-1-git-send-email-thomas.abraham@linaro.org> For all supported peripheral controllers on Exynos5440, add clock lookup information. Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> --- arch/arm/boot/dts/exynos5440.dtsi | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index f5834d0..a54c4ab 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -65,12 +65,16 @@ compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; interrupts = <0 2 0>; + clocks = <&clock 21>, <&clock 21>; + clock-names = "uart", "clk_uart_baud0"; }; serial@C0000 { compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; interrupts = <0 3 0>; + clocks = <&clock 21>, <&clock 21>; + clock-names = "uart", "clk_uart_baud0"; }; spi { @@ -81,6 +85,8 @@ rx-dma-channel = <&pdma0 4>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 21>, <&clock 16>; + clock-names = "spi", "spi_busclk0"; }; pinctrl { @@ -113,6 +119,8 @@ interrupts = <0 5 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 21>; + clock-names = "i2c"; }; i2c@100000 { @@ -121,12 +129,16 @@ interrupts = <0 6 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 21>; + clock-names = "i2c"; }; watchdog { compatible = "samsung,s3c2410-wdt"; reg = <0x110000 0x1000>; interrupts = <0 1 0>; + clocks = <&clock 21>; + clock-names = "watchdog"; }; amba { @@ -140,12 +152,16 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x120000 0x1000>; interrupts = <0 34 0>; + clocks = <&clock 21>; + clock-names = "apb_pclk"; }; pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121000 0x1000>; interrupts = <0 35 0>; + clocks = <&clock 21>; + clock-names = "apb_pclk"; }; }; @@ -153,5 +169,7 @@ compatible = "samsung,s3c6410-rtc"; reg = <0x130000 0x1000>; interrupts = <0 17 0>, <0 16 0>; + clocks = <&clock 21>; + clock-names = "rtc"; }; }; -- 1.7.5.4
WARNING: multiple messages have this Message-ID (diff)
From: thomas.abraham@linaro.org (Thomas Abraham) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 15/16] ARM: dts: add clock provider information for all controllers in Exynos5440 SoC Date: Mon, 18 Feb 2013 13:51:25 +0530 [thread overview] Message-ID: <1361175686-19400-16-git-send-email-thomas.abraham@linaro.org> (raw) In-Reply-To: <1361175686-19400-1-git-send-email-thomas.abraham@linaro.org> For all supported peripheral controllers on Exynos5440, add clock lookup information. Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> --- arch/arm/boot/dts/exynos5440.dtsi | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index f5834d0..a54c4ab 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -65,12 +65,16 @@ compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; interrupts = <0 2 0>; + clocks = <&clock 21>, <&clock 21>; + clock-names = "uart", "clk_uart_baud0"; }; serial at C0000 { compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; interrupts = <0 3 0>; + clocks = <&clock 21>, <&clock 21>; + clock-names = "uart", "clk_uart_baud0"; }; spi { @@ -81,6 +85,8 @@ rx-dma-channel = <&pdma0 4>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 21>, <&clock 16>; + clock-names = "spi", "spi_busclk0"; }; pinctrl { @@ -113,6 +119,8 @@ interrupts = <0 5 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 21>; + clock-names = "i2c"; }; i2c at 100000 { @@ -121,12 +129,16 @@ interrupts = <0 6 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 21>; + clock-names = "i2c"; }; watchdog { compatible = "samsung,s3c2410-wdt"; reg = <0x110000 0x1000>; interrupts = <0 1 0>; + clocks = <&clock 21>; + clock-names = "watchdog"; }; amba { @@ -140,12 +152,16 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x120000 0x1000>; interrupts = <0 34 0>; + clocks = <&clock 21>; + clock-names = "apb_pclk"; }; pdma1: pdma at 121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121000 0x1000>; interrupts = <0 35 0>; + clocks = <&clock 21>; + clock-names = "apb_pclk"; }; }; @@ -153,5 +169,7 @@ compatible = "samsung,s3c6410-rtc"; reg = <0x130000 0x1000>; interrupts = <0 17 0>, <0 16 0>; + clocks = <&clock 21>; + clock-names = "rtc"; }; }; -- 1.7.5.4
next prev parent reply other threads:[~2013-02-18 8:21 UTC|newest] Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-02-18 8:21 [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:21 ` [PATCH v6 01/16] clk: samsung: add common clock framework helper functions for Samsung platforms Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham [not found] ` <1361175686-19400-2-git-send-email-thomas.abraham-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2013-03-03 1:08 ` Heiko Stübner 2013-03-03 1:08 ` Heiko Stübner [not found] ` <201303030208.49722.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org> 2013-03-03 11:17 ` Sylwester Nawrocki 2013-03-03 11:17 ` Sylwester Nawrocki 2013-03-03 11:45 ` Tomasz Figa 2013-03-03 11:45 ` Tomasz Figa 2013-03-03 12:08 ` Heiko Stübner 2013-03-03 12:08 ` Heiko Stübner 2013-03-03 12:48 ` Sylwester Nawrocki 2013-03-03 12:48 ` Sylwester Nawrocki 2013-03-07 1:44 ` Kukjin Kim 2013-03-07 1:44 ` Kukjin Kim 2013-03-09 9:15 ` Kukjin Kim 2013-03-09 9:15 ` Kukjin Kim 2013-03-03 11:59 ` Sylwester Nawrocki 2013-03-03 11:59 ` Sylwester Nawrocki 2013-03-03 12:34 ` Heiko Stübner 2013-03-03 12:34 ` Heiko Stübner 2013-02-18 8:21 ` [PATCH v6 02/16] clk: samsung: add pll clock registration helper functions Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:21 ` [PATCH v6 03/16] clk: exynos4: register clocks using common clock framework Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:21 ` [PATCH v6 04/16] clk: exynos5250: " Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:21 ` [PATCH v6 05/16] clk: exynos5440: " Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:21 ` [PATCH v6 07/16] ARM: Exynos: Initialize the clocks prior to timer initialization Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:32 ` Kyungmin Park 2013-02-18 8:32 ` Kyungmin Park 2013-02-18 8:21 ` [PATCH v6 08/16] ARM: Exynos4: allow legacy board support to specify xxti and xusbxti clock speed Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:21 ` [PATCH v6 09/16] ARM: Exynos: remove auxdata table from exynos4/5 dt machine file Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:21 ` [PATCH v6 10/16] clocksource: mct: use fin_pll clock as the tick clock source for mct Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:21 ` [PATCH v6 11/16] clocksource: mct: add support for mct clock setup Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:21 ` [PATCH v6 12/16] ARM: dts: add Exynos4 and Exynos5 clock controller nodes Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:21 ` [PATCH v6 13/16] ARM: dts: add clock provider information for all controllers in Exynos4 SoCs Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:21 ` [PATCH v6 14/16] ARM: dts: add clock provider information for all controllers in Exynos5250 SoC Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham [this message] 2013-02-18 8:21 ` [PATCH v6 15/16] ARM: dts: add clock provider information for all controllers in Exynos5440 SoC Thomas Abraham 2013-02-18 8:21 ` [PATCH v6 16/16] ARM: dts: add board specific fixed rate clock nodes for Exynos based platforms Thomas Abraham 2013-02-18 8:21 ` Thomas Abraham 2013-02-19 5:11 ` Olof Johansson 2013-02-19 5:11 ` Olof Johansson 2013-03-19 18:49 ` [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework Mike Turquette 2013-03-19 18:49 ` Mike Turquette 2013-03-19 21:12 ` Heiko Stübner 2013-03-19 21:12 ` Heiko Stübner [not found] ` <201303192212.16877.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org> 2013-03-19 21:50 ` Mike Turquette 2013-03-19 21:50 ` Mike Turquette 2013-03-20 0:00 ` Kukjin Kim 2013-03-20 0:00 ` Kukjin Kim 2013-03-20 2:56 ` Mike Turquette 2013-03-20 2:56 ` Mike Turquette 2013-03-20 4:50 ` Kukjin Kim 2013-03-20 4:50 ` Kukjin Kim [not found] ` <11af01ce2526$63b0a8f0$2b11fad0$%kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> 2013-03-20 14:40 ` RE: " Mike Turquette 2013-03-20 14:40 ` Mike Turquette 2013-03-21 23:26 ` RE: " Kukjin Kim 2013-03-21 23:26 ` Kukjin Kim 2013-03-22 14:27 ` RE: RE: " Mike Turquette 2013-03-22 14:27 ` Mike Turquette 2013-03-25 1:05 ` RE: RE: " Kukjin Kim 2013-03-25 1:05 ` Kukjin Kim
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1361175686-19400-16-git-send-email-thomas.abraham@linaro.org \ --to=thomas.abraham@linaro.org \ --cc=devicetree-discuss@lists.ozlabs.org \ --cc=kgene.kim@samsung.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=mturquette@linaro.org \ --cc=sylvester.nawrocki@gmail.com \ --cc=t.figa@samsung.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.