From: chao.xie@marvell.com (Chao Xie)
To: linux-arm-kernel@lists.infradead.org
Subject: [V8 PATCH 10/16] arm: mmp: remove usb devices from pxa168
Date: Wed, 20 Feb 2013 23:07:20 -0500 [thread overview]
Message-ID: <1361419646-9052-11-git-send-email-chao.xie@marvell.com> (raw)
In-Reply-To: <1361419646-9052-1-git-send-email-chao.xie@marvell.com>
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
arch/arm/mach-mmp/pxa168.c | 42 ------------------------------------------
1 files changed, 0 insertions(+), 42 deletions(-)
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index b7f074f..dd3a68b 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -28,7 +28,6 @@
#include <mach/mfp.h>
#include <linux/dma-mapping.h>
#include <mach/pxa168.h>
-#include <mach/regs-usb.h>
#include "common.h"
#include "clock.h"
@@ -135,47 +134,6 @@ struct platform_device pxa168_device_gpio = {
.resource = pxa168_resource_gpio,
};
-struct resource pxa168_usb_host_resources[] = {
- /* USB Host conroller register base */
- [0] = {
- .start = PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET,
- .end = PXA168_U2H_REGBASE + USB_REG_RANGE,
- .flags = IORESOURCE_MEM,
- .name = "capregs",
- },
- /* USB PHY register base */
- [1] = {
- .start = PXA168_U2H_PHYBASE,
- .end = PXA168_U2H_PHYBASE + USB_PHY_RANGE,
- .flags = IORESOURCE_MEM,
- .name = "phyregs",
- },
- [2] = {
- .start = IRQ_PXA168_USB2,
- .end = IRQ_PXA168_USB2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
-struct platform_device pxa168_device_usb_host = {
- .name = "pxa-sph",
- .id = -1,
- .dev = {
- .dma_mask = &pxa168_usb_host_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-
- .num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
- .resource = pxa168_usb_host_resources,
-};
-
-int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata)
-{
- pxa168_device_usb_host.dev.platform_data = pdata;
- return platform_device_register(&pxa168_device_usb_host);
-}
-
void pxa168_restart(char mode, const char *cmd)
{
soft_restart(0xffff0000);
--
1.7.4.1
next prev parent reply other threads:[~2013-02-21 4:07 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-21 4:07 [V8 PATCH 00/16] mv-usb phy enhancement patches Chao Xie
2013-02-21 4:07 ` [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller Chao Xie
2013-03-04 14:21 ` Felipe Balbi
2013-03-05 2:03 ` Chao Xie
2013-03-05 11:04 ` Felipe Balbi
2013-03-05 16:43 ` Alan Stern
2013-03-05 17:20 ` Felipe Balbi
2013-03-06 2:11 ` Chao Xie
2013-03-06 8:10 ` Felipe Balbi
2013-03-06 8:24 ` Chao Xie
2013-03-06 8:53 ` Felipe Balbi
2013-03-06 9:02 ` Chao Xie
2013-03-06 9:26 ` Felipe Balbi
2013-03-06 16:48 ` Russell King - ARM Linux
2013-03-07 0:57 ` Chao Xie
2013-03-06 16:45 ` Russell King - ARM Linux
2013-02-21 4:07 ` [V8 PATCH 02/16] usb: gadget: mv_udc: use PHY driver for udc Chao Xie
2013-03-04 14:24 ` Felipe Balbi
2013-03-05 2:11 ` Chao Xie
2013-02-21 4:07 ` [V8 PATCH 03/16] usb: ehci: ehci-mv: use PHY driver for ehci Chao Xie
2013-02-21 4:07 ` [V8 PATCH 04/16] usb: otg: mv_otg: use PHY driver for otg Chao Xie
2013-02-21 4:07 ` [V8 PATCH 05/16] arm: mmp2: change the defintion of usb devices Chao Xie
2013-02-21 4:07 ` [V8 PATCH 06/16] arm: pxa910: " Chao Xie
2013-02-21 4:07 ` [V8 PATCH 07/16] arm: brownstone: add usb support for the board Chao Xie
2013-02-21 4:07 ` [V8 PATCH 08/16] arm: ttc_dkb: add usb support Chao Xie
2013-02-21 4:07 ` [V8 PATCH 09/16] arm: mmp: remove the usb phy setting Chao Xie
2013-02-21 4:07 ` Chao Xie [this message]
2013-02-21 4:07 ` [V8 PATCH 11/16] usb: phy: mv_usb2_phy: add externel chip support Chao Xie
2013-02-21 4:07 ` [V8 PATCH 12/16] usb: gadget: mv_udc: add extern " Chao Xie
2013-02-21 4:07 ` [V8 PATCH 13/16] usb: ehci: ehci-mv: " Chao Xie
2013-02-21 4:07 ` [V8 PATCH 14/16] usb: otg: mv_otg: " Chao Xie
2013-02-21 4:07 ` [V8 PATCH 15/16] arm: mmp: add extern chip support for brownstone Chao Xie
2013-02-21 4:07 ` [V8 PATCH 16/16] arm: mmp: add extern chip support for ttc_dkb Chao Xie
2013-02-21 8:04 ` [V8 PATCH 00/16] mv-usb phy enhancement patches Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361419646-9052-11-git-send-email-chao.xie@marvell.com \
--to=chao.xie@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.