From: Wenyou Yang <wenyou.yang@atmel.com>
To: <linux-arm-kernel@lists.infradead.org>
Cc: <grant.likely@secretlab.ca>,
<broonie@opensource.wolfsonmicro.com>, <richard.genoud@gmail.com>,
<plagnioj@jcrosoft.com>, <nicolas.ferre@atmel.com>,
<JM.Lin@atmel.com>, <wenyou.yang@atmel.com>,
<spi-devel-general@lists.sourceforge.net>,
<linux@arm.linux.org.uk>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v7 14/14] ARM: dts: add pinctrl property for spi node for atmel SoC
Date: Tue, 19 Mar 2013 15:52:15 +0800 [thread overview]
Message-ID: <1363679535-4280-1-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1363678866-3567-1-git-send-email-wenyou.yang@atmel.com>
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Cc: linux@arm.linux.org.uk
Cc: linux-kernel@vger.kernel.org
---
arch/arm/boot/dts/at91sam9260.dtsi | 22 ++++++++++++++++++++++
arch/arm/boot/dts/at91sam9263.dtsi | 22 ++++++++++++++++++++++
arch/arm/boot/dts/at91sam9g45.dtsi | 22 ++++++++++++++++++++++
arch/arm/boot/dts/at91sam9n12.dtsi | 22 ++++++++++++++++++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 22 ++++++++++++++++++++++
5 files changed, 110 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 6e31dc8..39253b9 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -322,6 +322,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */
+ 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */
+ 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */
+ 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */
+ 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -477,6 +495,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffc8000 0x200>;
interrupts = <12 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -486,6 +506,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffcc000 0x200>;
interrupts = <13 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 6c6d9ae..94b58ab 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -303,6 +303,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */
+ 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */
+ 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */
+ 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */
+ 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -469,6 +487,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa4000 0x200>;
interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -478,6 +498,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa8000 0x200>;
interrupts = <15 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index e085b8a..cfdf429 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -322,6 +322,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */
+ 1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */
+ 1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */
+ 1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */
+ 1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -538,6 +556,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa4000 0x200>;
interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -547,6 +567,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa8000 0x200>;
interrupts = <15 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index f3f87ef3..b2961f1 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -261,6 +261,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */
+ 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */
+ 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */
+ 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */
+ 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -380,6 +398,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf0000000 0x100>;
interrupts = <13 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -389,6 +409,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>;
interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 83a4889..04fbf9d 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -319,6 +319,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */
+ 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */
+ 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */
+ 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */
+ 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -512,6 +530,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf0000000 0x100>;
interrupts = <13 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -521,6 +541,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>;
interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: wenyou.yang@atmel.com (Wenyou Yang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 14/14] ARM: dts: add pinctrl property for spi node for atmel SoC
Date: Tue, 19 Mar 2013 15:52:15 +0800 [thread overview]
Message-ID: <1363679535-4280-1-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1363678866-3567-1-git-send-email-wenyou.yang@atmel.com>
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Cc: linux at arm.linux.org.uk
Cc: linux-kernel at vger.kernel.org
---
arch/arm/boot/dts/at91sam9260.dtsi | 22 ++++++++++++++++++++++
arch/arm/boot/dts/at91sam9263.dtsi | 22 ++++++++++++++++++++++
arch/arm/boot/dts/at91sam9g45.dtsi | 22 ++++++++++++++++++++++
arch/arm/boot/dts/at91sam9n12.dtsi | 22 ++++++++++++++++++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 22 ++++++++++++++++++++++
5 files changed, 110 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 6e31dc8..39253b9 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -322,6 +322,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */
+ 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */
+ 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */
+ 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */
+ 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio at fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -477,6 +495,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffc8000 0x200>;
interrupts = <12 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -486,6 +506,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffcc000 0x200>;
interrupts = <13 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 6c6d9ae..94b58ab 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -303,6 +303,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */
+ 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */
+ 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */
+ 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */
+ 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio at fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -469,6 +487,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa4000 0x200>;
interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -478,6 +498,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa8000 0x200>;
interrupts = <15 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index e085b8a..cfdf429 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -322,6 +322,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */
+ 1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */
+ 1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */
+ 1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */
+ 1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio at fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -538,6 +556,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa4000 0x200>;
interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -547,6 +567,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa8000 0x200>;
interrupts = <15 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index f3f87ef3..b2961f1 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -261,6 +261,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */
+ 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */
+ 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */
+ 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */
+ 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio at fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -380,6 +398,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf0000000 0x100>;
interrupts = <13 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -389,6 +409,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>;
interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 83a4889..04fbf9d 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -319,6 +319,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */
+ 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */
+ 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */
+ 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */
+ 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio at fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -512,6 +530,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf0000000 0x100>;
interrupts = <13 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -521,6 +541,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>;
interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
--
1.7.9.5
next prev parent reply other threads:[~2013-03-19 7:55 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-19 7:41 [PATCH v7 00/14] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support Wenyou Yang
2013-03-19 7:41 ` Wenyou Yang
2013-03-19 7:42 ` [PATCH v7 01/14] spi/spi-atmel: detect the capabilities of SPI core by reading the VERSION register Wenyou Yang
2013-03-19 7:42 ` Wenyou Yang
2013-04-01 13:38 ` Mark Brown
2013-04-01 13:38 ` Mark Brown
2013-03-19 7:43 ` [PATCH v7 02/14] spi/spi-atmel: add support transfer on CS1,2,3, not only on CS0 Wenyou Yang
2013-03-19 7:43 ` [PATCH v7 02/14] spi/spi-atmel: add support transfer on CS1, 2, 3, " Wenyou Yang
2013-03-19 7:43 ` Wenyou Yang
2013-04-01 13:41 ` [PATCH v7 02/14] spi/spi-atmel: add support transfer on CS1,2,3, " Mark Brown
2013-04-01 13:41 ` [PATCH v7 02/14] spi/spi-atmel: add support transfer on CS1, 2, 3, " Mark Brown
2013-03-19 7:43 ` [PATCH v7 03/14] spi/spi-atmel: add physical base address Wenyou Yang
2013-03-19 7:43 ` Wenyou Yang
2013-03-19 7:43 ` Wenyou Yang
2013-04-01 13:41 ` Mark Brown
2013-04-01 13:41 ` Mark Brown
2013-04-02 5:49 ` Yang, Wenyou
2013-04-02 5:49 ` Yang, Wenyou
2013-04-02 5:49 ` Yang, Wenyou
2013-04-02 6:17 ` Yang, Wenyou
2013-04-02 6:17 ` Yang, Wenyou
2013-04-02 6:17 ` Yang, Wenyou
2013-03-19 7:44 ` [PATCH v7 04/14] spi/spi-atmel: call unmapping on transfers buffers Wenyou Yang
2013-03-19 7:44 ` Wenyou Yang
2013-04-01 13:43 ` Mark Brown
2013-04-01 13:43 ` Mark Brown
2013-03-19 7:45 ` [PATCH v7 05/14] spi/spi-atmel: status information passed through controller data Wenyou Yang
2013-03-19 7:45 ` Wenyou Yang
2013-04-01 13:43 ` Mark Brown
2013-04-01 13:43 ` Mark Brown
2013-03-19 7:46 ` [PATCH v7 06/14] spi/spi-atmel: add flag to controller data for lock operations Wenyou Yang
2013-03-19 7:46 ` Wenyou Yang
2013-03-19 7:46 ` Wenyou Yang
2013-04-01 13:46 ` Mark Brown
2013-04-01 13:46 ` Mark Brown
2013-04-03 5:09 ` Yang, Wenyou
2013-04-03 5:09 ` Yang, Wenyou
2013-04-03 5:09 ` Yang, Wenyou
2013-03-19 7:46 ` [PATCH v7 07/14] spi/spi-atmel: add dmaengine support Wenyou Yang
2013-03-19 7:46 ` Wenyou Yang
2013-03-19 7:47 ` [PATCH v7 08/14] spi/spi-atmel: fix spi-atmel driver to adapt to slave_config changes Wenyou Yang
2013-03-19 7:47 ` Wenyou Yang
2013-04-01 13:51 ` Mark Brown
2013-04-01 13:51 ` Mark Brown
2013-04-02 5:45 ` Yang, Wenyou
2013-04-02 5:45 ` Yang, Wenyou
2013-04-02 5:45 ` Yang, Wenyou
2013-03-19 7:47 ` [PATCH v7 09/14] spi/spi-atmel: correct 16 bits transfers using PIO Wenyou Yang
2013-03-19 7:47 ` Wenyou Yang
2013-04-01 13:53 ` Mark Brown
2013-04-01 13:53 ` Mark Brown
2013-03-19 7:49 ` [PATCH v7 10/14] spi/spi-atmel: correct 16 bits transfers with DMA Wenyou Yang
2013-03-19 7:49 ` Wenyou Yang
2013-03-19 7:49 ` Wenyou Yang
2013-04-01 13:53 ` Mark Brown
2013-04-01 13:53 ` Mark Brown
2013-04-02 5:46 ` Yang, Wenyou
2013-04-02 5:46 ` Yang, Wenyou
2013-04-02 5:46 ` Yang, Wenyou
2013-03-19 7:49 ` [PATCH v7 11/14] ARM: at91: add clocks for spi dt entries Wenyou Yang
2013-03-19 7:49 ` Wenyou Yang
2013-03-19 7:50 ` [PATCH v7 12/14] ARM: dts: add spi nodes for atmel SoC Wenyou Yang
2013-03-19 7:50 ` Wenyou Yang
2013-03-19 7:50 ` Wenyou Yang
2013-03-19 7:51 ` [PATCH v7 13/14] ARM: dts: add spi nodes for the atmel boards Wenyou Yang
2013-03-19 7:51 ` Wenyou Yang
2013-03-19 7:51 ` Wenyou Yang
2013-03-19 7:52 ` Wenyou Yang [this message]
2013-03-19 7:52 ` [PATCH v7 14/14] ARM: dts: add pinctrl property for spi node for atmel SoC Wenyou Yang
[not found] ` <1363678866-3567-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-03-21 9:32 ` [PATCH v7 00/14] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support Nicolas Ferre
2013-03-21 9:32 ` Nicolas Ferre
[not found] ` <514AD3A2.50203-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-03-22 9:26 ` Nicolas Ferre
2013-03-22 9:26 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363679535-4280-1-git-send-email-wenyou.yang@atmel.com \
--to=wenyou.yang@atmel.com \
--cc=JM.Lin@atmel.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=richard.genoud@gmail.com \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.