From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 01/13] drm/i915: introduce struct intel_crtc_config
Date: Wed, 27 Mar 2013 00:44:50 +0100 [thread overview]
Message-ID: <1364341502-1184-2-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1364341502-1184-1-git-send-email-daniel.vetter@ffwll.ch>
Currently only containing the requested and the adjusted mode. And
only crtc callbacks are converted somewhat to it, encoders will be
done on a as-needed basis (simply too much churn in one patch
otherwise).
Future patches will add tons more useful stuff to this struct,
starting with the very simple.
v2: Store the pipe_config in the intel_crtc, so that the ->mode-set,
->enable and also ->disable have easy access to it.
v3: Store the pipe config in the right crtc ...
v4: Rebased.
v5: Fixup an OOPS when trying to kfree an ERR_PTR.
v6: Used drm_moode_copy and some other small cleanups as suggested
by Ville Syrjälä.
v7: drm_mode_copy preserves the mode id of the destination, so no need
to clear it again (Ville).
v8: Break a long line spotted by Paulo.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
drivers/gpu/drm/i915/i915_drv.h | 4 +-
drivers/gpu/drm/i915/intel_display.c | 82 +++++++++++++++++++++---------------
drivers/gpu/drm/i915/intel_drv.h | 7 +++
3 files changed, 57 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e637d32..d3b4657 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -284,6 +284,8 @@ struct drm_i915_error_state {
struct intel_display_error_state *display;
};
+struct intel_crtc_config;
+
struct drm_i915_display_funcs {
bool (*fbc_enabled)(struct drm_device *dev);
void (*enable_fbc)(struct drm_crtc *crtc, unsigned long interval);
@@ -297,8 +299,6 @@ struct drm_i915_display_funcs {
struct drm_display_mode *mode);
void (*modeset_global_resources)(struct drm_device *dev);
int (*crtc_mode_set)(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *old_fb);
void (*crtc_enable)(struct drm_crtc *crtc);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0b17a19..34986fe 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3954,15 +3954,16 @@ bool intel_connector_get_hw_state(struct intel_connector *connector)
return encoder->get_hw_state(encoder, &pipe);
}
-static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+static bool intel_crtc_compute_config(struct drm_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
{
struct drm_device *dev = crtc->dev;
+ struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
if (HAS_PCH_SPLIT(dev)) {
/* FDI link clock is fixed at 2.7G */
- if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
+ if (pipe_config->requested_mode.clock * 3
+ > IRONLAKE_FDI_FREQ * 4)
return false;
}
@@ -4648,14 +4649,15 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
}
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
int refclk, num_connectors = 0;
@@ -5620,14 +5622,15 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
}
static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
int num_connectors = 0;
@@ -5786,14 +5789,15 @@ static void haswell_modeset_global_resources(struct drm_device *dev)
}
static int haswell_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
int num_connectors = 0;
@@ -5875,8 +5879,6 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
}
static int intel_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *fb)
{
@@ -5885,13 +5887,16 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
struct drm_encoder_helper_funcs *encoder_funcs;
struct intel_encoder *encoder;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int ret;
drm_vblank_pre_modeset(dev, pipe);
- ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
- x, y, fb);
+ ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb);
+
drm_vblank_post_modeset(dev, pipe);
if (ret != 0)
@@ -7502,19 +7507,22 @@ static void intel_modeset_commit_output_state(struct drm_device *dev)
}
}
-static struct drm_display_mode *
-intel_modeset_adjusted_mode(struct drm_crtc *crtc,
- struct drm_display_mode *mode)
+static struct intel_crtc_config *
+intel_modeset_pipe_config(struct drm_crtc *crtc,
+ struct drm_display_mode *mode)
{
struct drm_device *dev = crtc->dev;
- struct drm_display_mode *adjusted_mode;
struct drm_encoder_helper_funcs *encoder_funcs;
struct intel_encoder *encoder;
+ struct intel_crtc_config *pipe_config;
- adjusted_mode = drm_mode_duplicate(dev, mode);
- if (!adjusted_mode)
+ pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
+ if (!pipe_config)
return ERR_PTR(-ENOMEM);
+ drm_mode_copy(&pipe_config->adjusted_mode, mode);
+ drm_mode_copy(&pipe_config->requested_mode, mode);
+
/* Pass our mode to the connectors and the CRTC to give them a chance to
* adjust it according to limitations or connector properties, and also
* a chance to reject the mode entirely.
@@ -7525,22 +7533,23 @@ intel_modeset_adjusted_mode(struct drm_crtc *crtc,
if (&encoder->new_crtc->base != crtc)
continue;
encoder_funcs = encoder->base.helper_private;
- if (!(encoder_funcs->mode_fixup(&encoder->base, mode,
- adjusted_mode))) {
+ if (!(encoder_funcs->mode_fixup(&encoder->base,
+ &pipe_config->requested_mode,
+ &pipe_config->adjusted_mode))) {
DRM_DEBUG_KMS("Encoder fixup failed\n");
goto fail;
}
}
- if (!(intel_crtc_mode_fixup(crtc, mode, adjusted_mode))) {
+ if (!(intel_crtc_compute_config(crtc, pipe_config))) {
DRM_DEBUG_KMS("CRTC fixup failed\n");
goto fail;
}
DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
- return adjusted_mode;
+ return pipe_config;
fail:
- drm_mode_destroy(dev, adjusted_mode);
+ kfree(pipe_config);
return ERR_PTR(-EINVAL);
}
@@ -7806,7 +7815,8 @@ int intel_set_mode(struct drm_crtc *crtc,
{
struct drm_device *dev = crtc->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_display_mode *adjusted_mode, *saved_mode, *saved_hwmode;
+ struct drm_display_mode *saved_mode, *saved_hwmode;
+ struct intel_crtc_config *pipe_config = NULL;
struct intel_crtc *intel_crtc;
unsigned disable_pipes, prepare_pipes, modeset_pipes;
int ret = 0;
@@ -7833,11 +7843,12 @@ int intel_set_mode(struct drm_crtc *crtc,
* Hence simply check whether any bit is set in modeset_pipes in all the
* pieces of code that are not yet converted to deal with mutliple crtcs
* changing their mode at the same time. */
- adjusted_mode = NULL;
if (modeset_pipes) {
- adjusted_mode = intel_modeset_adjusted_mode(crtc, mode);
- if (IS_ERR(adjusted_mode)) {
- ret = PTR_ERR(adjusted_mode);
+ pipe_config = intel_modeset_pipe_config(crtc, mode);
+ if (IS_ERR(pipe_config)) {
+ ret = PTR_ERR(pipe_config);
+ pipe_config = NULL;
+
goto out;
}
}
@@ -7850,8 +7861,12 @@ int intel_set_mode(struct drm_crtc *crtc,
/* crtc->mode is already used by the ->mode_set callbacks, hence we need
* to set it here already despite that we pass it down the callchain.
*/
- if (modeset_pipes)
+ if (modeset_pipes) {
crtc->mode = *mode;
+ /* mode_set/enable/disable functions rely on a correct pipe
+ * config. */
+ to_intel_crtc(crtc)->config = *pipe_config;
+ }
/* Only after disabling all output pipelines that will be changed can we
* update the the output configuration. */
@@ -7865,7 +7880,6 @@ int intel_set_mode(struct drm_crtc *crtc,
*/
for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
ret = intel_crtc_mode_set(&intel_crtc->base,
- mode, adjusted_mode,
x, y, fb);
if (ret)
goto done;
@@ -7877,7 +7891,7 @@ int intel_set_mode(struct drm_crtc *crtc,
if (modeset_pipes) {
/* Store real post-adjustment hardware mode. */
- crtc->hwmode = *adjusted_mode;
+ crtc->hwmode = pipe_config->adjusted_mode;
/* Calculate and store various constants which
* are later needed by vblank and swap-completion
@@ -7888,7 +7902,6 @@ int intel_set_mode(struct drm_crtc *crtc,
/* FIXME: add subpixel order */
done:
- drm_mode_destroy(dev, adjusted_mode);
if (ret && crtc->enabled) {
crtc->hwmode = *saved_hwmode;
crtc->mode = *saved_mode;
@@ -7897,6 +7910,7 @@ done:
}
out:
+ kfree(pipe_config);
kfree(saved_mode);
return ret;
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 54bc2ea..4cc6625 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -200,6 +200,11 @@ struct intel_connector {
struct edid *edid;
};
+struct intel_crtc_config {
+ struct drm_display_mode requested_mode;
+ struct drm_display_mode adjusted_mode;
+};
+
struct intel_crtc {
struct drm_crtc base;
enum pipe pipe;
@@ -233,6 +238,8 @@ struct intel_crtc {
bool cursor_visible;
unsigned int bpp;
+ struct intel_crtc_config config;
+
/* We can share PLLs across outputs if the timings match */
struct intel_pch_pll *pch_pll;
uint32_t ddi_pll_sel;
--
1.7.11.7
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2013-03-26 23:45 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-26 23:44 [PATCH 00/13] pipe_config basic infrastructure Daniel Vetter
2013-03-26 23:44 ` Daniel Vetter [this message]
2013-03-27 16:43 ` [PATCH 01/13] drm/i915: introduce struct intel_crtc_config Jesse Barnes
2013-03-26 23:44 ` [PATCH 02/13] drm/i915: compute pipe_config earlier Daniel Vetter
2013-03-27 16:45 ` Jesse Barnes
2013-03-26 23:44 ` [PATCH 03/13] drm/i915: add pipe_config->timings_set Daniel Vetter
2013-03-27 16:49 ` Jesse Barnes
2013-03-27 16:59 ` Daniel Vetter
2013-03-27 17:00 ` Daniel Vetter
2013-03-27 16:59 ` Jesse Barnes
2013-03-27 17:06 ` Daniel Vetter
2013-03-27 17:15 ` Jesse Barnes
2013-03-26 23:44 ` [PATCH 04/13] drm/i915: add pipe_config->pixel_multiplier Daniel Vetter
2013-03-27 16:54 ` Jesse Barnes
2013-03-27 17:03 ` Daniel Vetter
2013-03-26 23:44 ` [PATCH 05/13] drm/i915: drop helper vtable for sdvo encoder Daniel Vetter
2013-03-27 16:55 ` Jesse Barnes
2013-03-26 23:44 ` [PATCH 06/13] drm/i915: add pipe_config->has_pch_encoder Daniel Vetter
2013-03-27 17:06 ` Jesse Barnes
2013-03-27 17:11 ` Daniel Vetter
2013-03-26 23:44 ` [PATCH 07/13] drm/i915: add pipe_config->limited_color_range Daniel Vetter
2013-03-27 17:09 ` Jesse Barnes
2013-03-26 23:44 ` [PATCH 08/13] drm/i915: introduce pipe_config->dither|pipe_bpp Daniel Vetter
2013-03-27 17:11 ` Jesse Barnes
2013-03-26 23:44 ` [PATCH 09/13] drm/i915: precompute pipe bpp before touching the hw Daniel Vetter
2013-03-27 17:24 ` Jesse Barnes
2013-03-27 18:58 ` Daniel Vetter
2013-03-26 23:44 ` [PATCH 10/13] drm/i915: convert DP autodither code to new infrastructure Daniel Vetter
2013-03-27 21:13 ` Jesse Barnes
2013-03-26 23:45 ` [PATCH 11/13] drm/i915: clean up plane bpp confusion Daniel Vetter
2013-03-27 21:15 ` Jesse Barnes
2013-03-28 11:26 ` Ville Syrjälä
2013-03-28 11:46 ` Daniel Vetter
2013-03-28 11:59 ` Ville Syrjälä
2013-03-28 12:49 ` [PATCH 1/2] drm/i915: check fb->pixel_format instead of bits_per_pixel Daniel Vetter
2013-03-28 12:49 ` [PATCH 2/2] drm/i915: fixup fb bpp computation in pipe_config_set_bpp Daniel Vetter
2013-03-28 15:13 ` Ville Syrjälä
2013-03-28 15:36 ` [PATCH] drm/i915: remove "inline" keyword from ironlake_disable_display_irq Daniel Vetter
2013-03-28 15:38 ` [PATCH] drm/i915: fixup fb bpp computation in pipe_config_set_bpp Daniel Vetter
2013-03-28 15:45 ` Ville Syrjälä
2013-03-28 15:55 ` Daniel Vetter
2013-03-28 14:42 ` [PATCH 1/2] drm/i915: check fb->pixel_format instead of bits_per_pixel Ville Syrjälä
2013-03-28 15:01 ` [PATCH] " Daniel Vetter
2013-03-28 15:16 ` Ville Syrjälä
2013-03-28 12:51 ` [PATCH 11/13] drm/i915: clean up plane bpp confusion Daniel Vetter
2013-03-26 23:45 ` [PATCH 12/13] drm/i915: clean up pipe " Daniel Vetter
2013-03-27 21:28 ` Jesse Barnes
2013-03-27 22:41 ` Daniel Vetter
2013-03-27 23:13 ` Jesse Barnes
2013-03-27 23:50 ` Daniel Vetter
2013-03-26 23:45 ` [PATCH 13/13] drm/i915: clear up the fdi/dp set_m_n confusion Daniel Vetter
2013-03-27 0:14 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364341502-1184-2-git-send-email-daniel.vetter@ffwll.ch \
--to=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.