From: Aaro Koskinen <aaro.koskinen@iki.fi> To: Tony Lindgren <tony@atomide.com>, linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org Cc: Felipe Balbi <balbi@ti.com>, Aaro Koskinen <aaro.koskinen@iki.fi> Subject: [PATCH v2 RESEND] ARM: OMAP1: fix omap_udc registration Date: Mon, 1 Apr 2013 23:03:00 +0300 [thread overview] Message-ID: <1364846580-5256-1-git-send-email-aaro.koskinen@iki.fi> (raw) omap_udc platform device is not registered properly anymore: CONFIG_USB_GADGET_OMAP was deleted by 193ab2a6 (usb: gadget: allow multiple gadgets to be built) already in v3.1. Fix by using CONFIG_USB_OMAP instead. Tested on Nokia 770 by checking that omap_udc is probed & working properly when built as a module. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> --- Patch history: v2: http://marc.info/?t=136266319800006&r=1&w=2 - use IS_ENABLED() v1: http://marc.info/?t=136260886600006&r=1&w=2 arch/arm/mach-omap1/include/mach/usb.h | 2 +- arch/arm/mach-omap1/usb.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 753cd5c..45e5ac7 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -2,7 +2,7 @@ * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number */ -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) #define is_usb0_device(config) 1 #else #define is_usb0_device(config) 0 diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 1a1db59..4118db5 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -123,7 +123,7 @@ omap_otg_init(struct omap_usb_config *config) syscon = omap_readl(OTG_SYSCON_1); syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->otg || config->register_dev) { struct platform_device *udc_device = config->udc_device; int status; @@ -169,7 +169,7 @@ omap_otg_init(struct omap_usb_config *config) void omap_otg_init(struct omap_usb_config *config) {} #endif -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) static struct resource udc_resources[] = { /* order is significant! */ @@ -600,7 +600,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) cpu_relax(); -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->register_dev) { int status; -- 1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: aaro.koskinen@iki.fi (Aaro Koskinen) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 RESEND] ARM: OMAP1: fix omap_udc registration Date: Mon, 1 Apr 2013 23:03:00 +0300 [thread overview] Message-ID: <1364846580-5256-1-git-send-email-aaro.koskinen@iki.fi> (raw) omap_udc platform device is not registered properly anymore: CONFIG_USB_GADGET_OMAP was deleted by 193ab2a6 (usb: gadget: allow multiple gadgets to be built) already in v3.1. Fix by using CONFIG_USB_OMAP instead. Tested on Nokia 770 by checking that omap_udc is probed & working properly when built as a module. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> --- Patch history: v2: http://marc.info/?t=136266319800006&r=1&w=2 - use IS_ENABLED() v1: http://marc.info/?t=136260886600006&r=1&w=2 arch/arm/mach-omap1/include/mach/usb.h | 2 +- arch/arm/mach-omap1/usb.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 753cd5c..45e5ac7 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -2,7 +2,7 @@ * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number */ -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) #define is_usb0_device(config) 1 #else #define is_usb0_device(config) 0 diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 1a1db59..4118db5 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -123,7 +123,7 @@ omap_otg_init(struct omap_usb_config *config) syscon = omap_readl(OTG_SYSCON_1); syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->otg || config->register_dev) { struct platform_device *udc_device = config->udc_device; int status; @@ -169,7 +169,7 @@ omap_otg_init(struct omap_usb_config *config) void omap_otg_init(struct omap_usb_config *config) {} #endif -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) static struct resource udc_resources[] = { /* order is significant! */ @@ -600,7 +600,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) cpu_relax(); -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->register_dev) { int status; -- 1.7.10.4
next reply other threads:[~2013-04-01 20:03 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-04-01 20:03 Aaro Koskinen [this message] 2013-04-01 20:03 ` [PATCH v2 RESEND] ARM: OMAP1: fix omap_udc registration Aaro Koskinen 2013-04-08 21:46 ` Tony Lindgren 2013-04-08 21:46 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1364846580-5256-1-git-send-email-aaro.koskinen@iki.fi \ --to=aaro.koskinen@iki.fi \ --cc=balbi@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.