All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: Mark Brown <broonie@kernel.org>,
	Kevin Hilman <khilman@linaro.org>,
	Mike Turquette <mturquette@linaro.org>
Cc: <devicetree-discuss@lists.ozlabs.org>,
	<linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	"Andrii.Tseglytskyi" <andrii.tseglytskyi@ti.com>,
	Nishanth Menon <nm@ti.com>
Subject: [PATCH v3 4/5] ARM: dts: OMAP4460: Add device nodes for ABB
Date: Thu, 2 May 2013 12:20:13 -0500	[thread overview]
Message-ID: <1367515215-30753-5-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1367515215-30753-1-git-send-email-nm@ti.com>

From: "Andrii.Tseglytskyi" <andrii.tseglytskyi@ti.com>

Add ABB device nodes for OMAP4460 device Data is based on OMAP4460
Technical Reference Manual revision Z (April 2013)

[nm@ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
---
 arch/arm/boot/dts/omap4460.dtsi |   38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 2cf227c..e854c41 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -29,4 +29,42 @@
 			     <0 55 0x4>;
 		ti,hwmods = "debugss";
 	};
+
+	ocp {
+		abb_mpu: regulator-abb-mpu {
+			status = "okay";
+
+			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1025000		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1313000		0	0	0x100000 0x40000 0
+			1375000		1	0	0	0	0
+			1389000		1	0	0	0	0
+			>;
+		};
+
+		abb_iva: regulator-abb-iva {
+			status = "okay";
+
+			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			950000		0	0	0	0	0
+			1140000		0	0	0	0	0
+			1291000		0	0	0x200000 0	0
+			1375000		1	0	0	0	0
+			1376000		1	0	0	0	0
+			>;
+		};
+	};
 };
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Kevin Hilman <khilman-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Mike Turquette
	<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>,
	"Andrii.Tseglytskyi"
	<andrii.tseglytskyi-l0cyMroinI0@public.gmane.org>,
	linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v3 4/5] ARM: dts: OMAP4460: Add device nodes for ABB
Date: Thu, 2 May 2013 12:20:13 -0500	[thread overview]
Message-ID: <1367515215-30753-5-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1367515215-30753-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>

From: "Andrii.Tseglytskyi" <andrii.tseglytskyi-l0cyMroinI0@public.gmane.org>

Add ABB device nodes for OMAP4460 device Data is based on OMAP4460
Technical Reference Manual revision Z (April 2013)

[nm-l0cyMroinI0@public.gmane.org: co-developer]
Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/omap4460.dtsi |   38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 2cf227c..e854c41 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -29,4 +29,42 @@
 			     <0 55 0x4>;
 		ti,hwmods = "debugss";
 	};
+
+	ocp {
+		abb_mpu: regulator-abb-mpu {
+			status = "okay";
+
+			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1025000		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1313000		0	0	0x100000 0x40000 0
+			1375000		1	0	0	0	0
+			1389000		1	0	0	0	0
+			>;
+		};
+
+		abb_iva: regulator-abb-iva {
+			status = "okay";
+
+			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			950000		0	0	0	0	0
+			1140000		0	0	0	0	0
+			1291000		0	0	0x200000 0	0
+			1375000		1	0	0	0	0
+			1376000		1	0	0	0	0
+			>;
+		};
+	};
 };
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/5] ARM: dts: OMAP4460: Add device nodes for ABB
Date: Thu, 2 May 2013 12:20:13 -0500	[thread overview]
Message-ID: <1367515215-30753-5-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1367515215-30753-1-git-send-email-nm@ti.com>

From: "Andrii.Tseglytskyi" <andrii.tseglytskyi@ti.com>

Add ABB device nodes for OMAP4460 device Data is based on OMAP4460
Technical Reference Manual revision Z (April 2013)

[nm at ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
---
 arch/arm/boot/dts/omap4460.dtsi |   38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 2cf227c..e854c41 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -29,4 +29,42 @@
 			     <0 55 0x4>;
 		ti,hwmods = "debugss";
 	};
+
+	ocp {
+		abb_mpu: regulator-abb-mpu {
+			status = "okay";
+
+			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1025000		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1313000		0	0	0x100000 0x40000 0
+			1375000		1	0	0	0	0
+			1389000		1	0	0	0	0
+			>;
+		};
+
+		abb_iva: regulator-abb-iva {
+			status = "okay";
+
+			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			950000		0	0	0	0	0
+			1140000		0	0	0	0	0
+			1291000		0	0	0x200000 0	0
+			1375000		1	0	0	0	0
+			1376000		1	0	0	0	0
+			>;
+		};
+	};
 };
-- 
1.7.9.5

  parent reply	other threads:[~2013-05-02 17:20 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-02 17:20 [PATCH v3 0/5] regulator/OMAP: Support TI Adaptive Body Bias(ABB) on-chip LDO driver Nishanth Menon
2013-05-02 17:20 ` Nishanth Menon
2013-05-02 17:20 ` Nishanth Menon
2013-05-02 17:20 ` [PATCH v3 1/5] regulator: Introduce " Nishanth Menon
2013-05-02 17:20   ` Nishanth Menon
2013-05-02 17:20   ` Nishanth Menon
2013-05-03  9:02   ` Mark Brown
2013-05-03  9:02     ` Mark Brown
2013-05-03  9:02     ` Mark Brown
2013-05-03 12:03     ` Nishanth Menon
2013-05-03 12:03       ` Nishanth Menon
2013-05-03 12:03       ` Nishanth Menon
2013-05-02 17:20 ` [PATCH v3 2/5] ARM: dts: OMAP36xx: Add device node for ABB Nishanth Menon
2013-05-02 17:20   ` Nishanth Menon
2013-05-02 17:20   ` Nishanth Menon
2013-05-02 17:20 ` [PATCH v3 3/5] ARM: dts: OMAP443x: Add device nodes " Nishanth Menon
2013-05-02 17:20   ` Nishanth Menon
2013-05-02 17:20   ` Nishanth Menon
2013-05-02 17:20 ` Nishanth Menon [this message]
2013-05-02 17:20   ` [PATCH v3 4/5] ARM: dts: OMAP4460: " Nishanth Menon
2013-05-02 17:20   ` Nishanth Menon
2013-05-02 17:20 ` [PATCH v3 5/5] ARM: dts: OMAP5: " Nishanth Menon
2013-05-02 17:20   ` Nishanth Menon
2013-05-02 17:20   ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1367515215-30753-5-git-send-email-nm@ti.com \
    --to=nm@ti.com \
    --cc=andrii.tseglytskyi@ti.com \
    --cc=broonie@kernel.org \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=khilman@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mturquette@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.