All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Gupta, Pekon" <pekon@ti.com>
To: Tony Lindgren <tony@atomide.com>, linux-omap@vger.kernel.org
Cc: linux-mtd@lists.infradead.org,
	Philip Avinash <avinashphilip@ti.com>,
	"Nori, Sekhar" <nsekhar@ti.com>, "Balbi, Felipe" <balbi@ti.com>,
	hvaibhav@ti.com, "Gupta, Pekon" <pekon@ti.com>
Subject: [PATCH v4,3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
Date: Tue, 28 May 2013 17:11:25 +0530	[thread overview]
Message-ID: <1369741285-1967-4-git-send-email-pekon@ti.com> (raw)
In-Reply-To: <1369741285-1967-1-git-send-email-pekon@ti.com>

From: Philip Avinash <avinashphilip@ti.com>

NAND flash connected in am335x-evm on GPMC controller. This patch adds
device tree node in am3355-evm with GPMC contoller timing for NAND flash
interface, NAND partition table, ECC scheme, elm handle id.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Gupta, Pekon <pekon@ti.com>
---
 arch/arm/boot/dts/am335x-evm.dts | 105 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 0423298..7d2be9c 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -44,6 +44,26 @@
 				0x154 0x27	/* spi0_d0.gpio0_3, INPUT | MODE7 */
 			>;
 		};
+
+		nandflash_pins_s0: nandflash_pins_s0 {
+			pinctrl-single,pins = <
+				0x0 0x30	/* gpmc_ad0.gpmc_ad0, INPUT | PULLUP | MODE0 */
+				0x4 0x30	/* gpmc_ad1.gpmc_ad1, INPUT | PULLUP | MODE0 */
+				0x8 0x30	/* gpmc_ad2.gpmc_ad2, INPUT | PULLUP | MODE0 */
+				0xc 0x30	/* gpmc_ad3.gpmc_ad3, INPUT | PULLUP | MODE0 */
+				0x10 0x30	/* gpmc_ad4.gpmc_ad4, INPUT | PULLUP | MODE0 */
+				0x14 0x30	/* gpmc_ad5.gpmc_ad5, INPUT | PULLUP | MODE0 */
+				0x18 0x30	/* gpmc_ad6.gpmc_ad6, INPUT | PULLUP | MODE0 */
+				0x1c 0x30	/* gpmc_ad7.gpmc_ad7, INPUT | PULLUP | MODE0 */
+				0x70 0x30	/* gpmc_wait0.gpmc_wait0, INPUT | PULLUP | MODE0 */
+				0x74 0x37	/* gpmc_wpn.gpio0_30, INPUT | PULLUP | MODE7 */
+				0x7c 0x8	/* gpmc_csn0.gpmc_csn0,  PULL DISA */
+				0x90 0x8	/* gpmc_advn_ale.gpmc_advn_ale, PULL DISA */
+				0x94 0x8	/* gpmc_oen_ren.gpmc_oen_ren, PULL DISA */
+				0x98 0x8	/* gpmc_wen.gpmc_wen, PULL DISA */
+				0x9c 0x8	/* gpmc_be0n_cle.gpmc_be0n_cle, PULL DISA */
+			>;
+		};
 	};
 
 	ocp {
@@ -102,6 +122,91 @@
 				reg = <0x48>;
 			};
 		};
+
+		elm: elm@48080000 {
+			status = "okay";
+		};
+
+		gpmc: gpmc@50000000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&nandflash_pins_s0>;
+			ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+			nand@0,0 {
+				reg = <0 0 0>; /* CS0, offset 0 */
+				nand-bus-width = <8>;
+				ti,nand-ecc-opt = "bch8";
+				gpmc,device-nand = "true";
+				gpmc,device-width = <1>;
+				gpmc,sync-clk-ps = <0>;
+				gpmc,cs-on-ns = <0>;
+				gpmc,cs-rd-off-ns = <44>;
+				gpmc,cs-wr-off-ns = <44>;
+				gpmc,adv-on-ns = <6>;
+				gpmc,adv-rd-off-ns = <34>;
+				gpmc,adv-wr-off-ns = <44>;
+				gpmc,we-on-ns = <0>;
+				gpmc,we-off-ns = <40>;
+				gpmc,oe-on-ns = <0>;
+				gpmc,oe-off-ns = <54>;
+				gpmc,access-ns = <64>;
+				gpmc,rd-cycle-ns = <82>;
+				gpmc,wr-cycle-ns = <82>;
+				gpmc,wait-on-read = "true";
+				gpmc,wait-on-write = "true";
+				gpmc,bus-turnaround-ns = <0>;
+				gpmc,cycle2cycle-delay-ns = <0>;
+				gpmc,clk-activation-ns = <0>;
+				gpmc,wait-monitoring-ns = <0>;
+				gpmc,wr-access-ns = <40>;
+				gpmc,wr-data-mux-bus-ns = <0>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				elm_id = <&elm>;
+
+				/* MTD partition table */
+				partition@0 {
+					label = "SPL1";
+					reg = <0x00000000 0x000020000>;
+				};
+
+				partition@1 {
+					label = "SPL2";
+					reg = <0x00020000 0x00020000>;
+				};
+
+				partition@2 {
+					label = "SPL3";
+					reg = <0x00040000 0x00020000>;
+				};
+
+				partition@3 {
+					label = "SPL4";
+					reg = <0x00060000 0x00020000>;
+				};
+
+				partition@4 {
+					label = "U-boot";
+					reg = <0x00080000 0x001e0000>;
+				};
+
+				partition@5 {
+					label = "environment";
+					reg = <0x00260000 0x00020000>;
+				};
+
+				partition@6 {
+					label = "Kernel";
+					reg = <0x00280000 0x00500000>;
+				};
+
+				partition@7 {
+					label = "File-System";
+					reg = <0x00780000 0x0F880000>;
+				};
+			};
+		};
 	};
 
 	vbat: fixedregulator@0 {
-- 
1.8.1


WARNING: multiple messages have this Message-ID (diff)
From: "Gupta, Pekon" <pekon@ti.com>
To: Tony Lindgren <tony@atomide.com>, <linux-omap@vger.kernel.org>
Cc: "Nori, Sekhar" <nsekhar@ti.com>,
	hvaibhav@ti.com, "Balbi, Felipe" <balbi@ti.com>,
	linux-mtd@lists.infradead.org, "Gupta, Pekon" <pekon@ti.com>
Subject: [PATCH v4, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
Date: Tue, 28 May 2013 17:11:25 +0530	[thread overview]
Message-ID: <1369741285-1967-4-git-send-email-pekon@ti.com> (raw)
In-Reply-To: <1369741285-1967-1-git-send-email-pekon@ti.com>

From: Philip Avinash <avinashphilip@ti.com>

NAND flash connected in am335x-evm on GPMC controller. This patch adds
device tree node in am3355-evm with GPMC contoller timing for NAND flash
interface, NAND partition table, ECC scheme, elm handle id.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Gupta, Pekon <pekon@ti.com>
---
 arch/arm/boot/dts/am335x-evm.dts | 105 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 0423298..7d2be9c 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -44,6 +44,26 @@
 				0x154 0x27	/* spi0_d0.gpio0_3, INPUT | MODE7 */
 			>;
 		};
+
+		nandflash_pins_s0: nandflash_pins_s0 {
+			pinctrl-single,pins = <
+				0x0 0x30	/* gpmc_ad0.gpmc_ad0, INPUT | PULLUP | MODE0 */
+				0x4 0x30	/* gpmc_ad1.gpmc_ad1, INPUT | PULLUP | MODE0 */
+				0x8 0x30	/* gpmc_ad2.gpmc_ad2, INPUT | PULLUP | MODE0 */
+				0xc 0x30	/* gpmc_ad3.gpmc_ad3, INPUT | PULLUP | MODE0 */
+				0x10 0x30	/* gpmc_ad4.gpmc_ad4, INPUT | PULLUP | MODE0 */
+				0x14 0x30	/* gpmc_ad5.gpmc_ad5, INPUT | PULLUP | MODE0 */
+				0x18 0x30	/* gpmc_ad6.gpmc_ad6, INPUT | PULLUP | MODE0 */
+				0x1c 0x30	/* gpmc_ad7.gpmc_ad7, INPUT | PULLUP | MODE0 */
+				0x70 0x30	/* gpmc_wait0.gpmc_wait0, INPUT | PULLUP | MODE0 */
+				0x74 0x37	/* gpmc_wpn.gpio0_30, INPUT | PULLUP | MODE7 */
+				0x7c 0x8	/* gpmc_csn0.gpmc_csn0,  PULL DISA */
+				0x90 0x8	/* gpmc_advn_ale.gpmc_advn_ale, PULL DISA */
+				0x94 0x8	/* gpmc_oen_ren.gpmc_oen_ren, PULL DISA */
+				0x98 0x8	/* gpmc_wen.gpmc_wen, PULL DISA */
+				0x9c 0x8	/* gpmc_be0n_cle.gpmc_be0n_cle, PULL DISA */
+			>;
+		};
 	};
 
 	ocp {
@@ -102,6 +122,91 @@
 				reg = <0x48>;
 			};
 		};
+
+		elm: elm@48080000 {
+			status = "okay";
+		};
+
+		gpmc: gpmc@50000000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&nandflash_pins_s0>;
+			ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+			nand@0,0 {
+				reg = <0 0 0>; /* CS0, offset 0 */
+				nand-bus-width = <8>;
+				ti,nand-ecc-opt = "bch8";
+				gpmc,device-nand = "true";
+				gpmc,device-width = <1>;
+				gpmc,sync-clk-ps = <0>;
+				gpmc,cs-on-ns = <0>;
+				gpmc,cs-rd-off-ns = <44>;
+				gpmc,cs-wr-off-ns = <44>;
+				gpmc,adv-on-ns = <6>;
+				gpmc,adv-rd-off-ns = <34>;
+				gpmc,adv-wr-off-ns = <44>;
+				gpmc,we-on-ns = <0>;
+				gpmc,we-off-ns = <40>;
+				gpmc,oe-on-ns = <0>;
+				gpmc,oe-off-ns = <54>;
+				gpmc,access-ns = <64>;
+				gpmc,rd-cycle-ns = <82>;
+				gpmc,wr-cycle-ns = <82>;
+				gpmc,wait-on-read = "true";
+				gpmc,wait-on-write = "true";
+				gpmc,bus-turnaround-ns = <0>;
+				gpmc,cycle2cycle-delay-ns = <0>;
+				gpmc,clk-activation-ns = <0>;
+				gpmc,wait-monitoring-ns = <0>;
+				gpmc,wr-access-ns = <40>;
+				gpmc,wr-data-mux-bus-ns = <0>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				elm_id = <&elm>;
+
+				/* MTD partition table */
+				partition@0 {
+					label = "SPL1";
+					reg = <0x00000000 0x000020000>;
+				};
+
+				partition@1 {
+					label = "SPL2";
+					reg = <0x00020000 0x00020000>;
+				};
+
+				partition@2 {
+					label = "SPL3";
+					reg = <0x00040000 0x00020000>;
+				};
+
+				partition@3 {
+					label = "SPL4";
+					reg = <0x00060000 0x00020000>;
+				};
+
+				partition@4 {
+					label = "U-boot";
+					reg = <0x00080000 0x001e0000>;
+				};
+
+				partition@5 {
+					label = "environment";
+					reg = <0x00260000 0x00020000>;
+				};
+
+				partition@6 {
+					label = "Kernel";
+					reg = <0x00280000 0x00500000>;
+				};
+
+				partition@7 {
+					label = "File-System";
+					reg = <0x00780000 0x0F880000>;
+				};
+			};
+		};
 	};
 
 	vbat: fixedregulator@0 {
-- 
1.8.1

  parent reply	other threads:[~2013-05-28 11:41 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-28 11:41 [PATCH v4,0/3] DT support for NAND on OMAP2 Gupta, Pekon
2013-05-28 11:41 ` Gupta, Pekon
2013-05-28 11:41 ` [PATCH v4,1/3] ARM: dts: AM33XX: Add ELM node Gupta, Pekon
2013-05-28 11:41   ` Gupta, Pekon
2013-05-28 11:41 ` [PATCH v4,2/3] ARM: dts: AM33XX: update GPMC node Gupta, Pekon
2013-05-28 11:41   ` Gupta, Pekon
2013-05-28 11:41 ` Gupta, Pekon [this message]
2013-05-28 11:41   ` [PATCH v4, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm Gupta, Pekon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1369741285-1967-4-git-send-email-pekon@ti.com \
    --to=pekon@ti.com \
    --cc=avinashphilip@ti.com \
    --cc=balbi@ti.com \
    --cc=hvaibhav@ti.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.