All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org,
	Archit Taneja <archit@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Subject: [PATCH 26/32] OMAPDSS: remove omap_dss_start/stop_device()
Date: Thu, 30 May 2013 09:34:47 +0000	[thread overview]
Message-ID: <1369906493-27538-27-git-send-email-tomi.valkeinen@ti.com> (raw)
In-Reply-To: <1369906493-27538-1-git-send-email-tomi.valkeinen@ti.com>

The omap_dss_start_device() and omap_dss_stop_device(), called by the
DSS output drivers, are old relics. They originally did something
totally else, but nowadays they increase the module ref count for panels
that are enabled.

This model is quite broken: the panel modules may be used even before
they are enabled. For example, configuring the panel requires calls to
functions located in the panel modules.

In the following patches we try to improve the ref count management for
the modules and display devices. The first step, however, is to remove
the omap_dss_start/stop_device() totally.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/display.c | 20 --------------------
 drivers/video/omap2/dss/dpi.c     | 10 ----------
 drivers/video/omap2/dss/dsi.c     | 10 ----------
 drivers/video/omap2/dss/hdmi.c    | 12 +-----------
 drivers/video/omap2/dss/rfbi.c    |  9 ---------
 drivers/video/omap2/dss/sdi.c     | 10 ----------
 drivers/video/omap2/dss/venc.c    | 12 +-----------
 include/video/omapdss.h           |  3 ---
 8 files changed, 2 insertions(+), 84 deletions(-)

diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index a9a1d55..8096764 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -233,26 +233,6 @@ struct omap_dss_device *omap_dss_find_device(void *data,
 }
 EXPORT_SYMBOL(omap_dss_find_device);
 
-int omap_dss_start_device(struct omap_dss_device *dssdev)
-{
-	if (!dssdev->driver) {
-		DSSDBG("no driver\n");
-		return -ENODEV;
-	}
-
-	if (!try_module_get(dssdev->dev->driver->owner))
-		return -ENODEV;
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_dss_start_device);
-
-void omap_dss_stop_device(struct omap_dss_device *dssdev)
-{
-	module_put(dssdev->dev->driver->owner);
-}
-EXPORT_SYMBOL(omap_dss_stop_device);
-
 void videomode_to_omap_video_timings(const struct videomode *vm,
 		struct omap_video_timings *ovt)
 {
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 66ba9a6..d369927 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -365,12 +365,6 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
 		goto err_no_out_mgr;
 	}
 
-	r = omap_dss_start_device(dssdev);
-	if (r) {
-		DSSERR("failed to start device\n");
-		goto err_start_dev;
-	}
-
 	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI)) {
 		r = regulator_enable(dpi.vdds_dsi_reg);
 		if (r)
@@ -425,8 +419,6 @@ err_get_dispc:
 	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI))
 		regulator_disable(dpi.vdds_dsi_reg);
 err_reg_enable:
-	omap_dss_stop_device(dssdev);
-err_start_dev:
 err_no_out_mgr:
 err_no_reg:
 	mutex_unlock(&dpi.lock);
@@ -453,8 +445,6 @@ void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
 	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI))
 		regulator_disable(dpi.vdds_dsi_reg);
 
-	omap_dss_stop_device(dssdev);
-
 	mutex_unlock(&dpi.lock);
 }
 EXPORT_SYMBOL(omapdss_dpi_display_disable);
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 37ca980..892838e 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4592,12 +4592,6 @@ int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
 
 	mutex_lock(&dsi->lock);
 
-	r = omap_dss_start_device(dssdev);
-	if (r) {
-		DSSERR("failed to start device\n");
-		goto err_start_dev;
-	}
-
 	r = dsi_runtime_get(dsidev);
 	if (r)
 		goto err_get_dsi;
@@ -4618,8 +4612,6 @@ err_init_dsi:
 	dsi_enable_pll_clock(dsidev, 0);
 	dsi_runtime_put(dsidev);
 err_get_dsi:
-	omap_dss_stop_device(dssdev);
-err_start_dev:
 	mutex_unlock(&dsi->lock);
 	DSSDBG("dsi_display_enable FAILED\n");
 	return r;
@@ -4648,8 +4640,6 @@ void omapdss_dsi_display_disable(struct omap_dss_device *dssdev,
 	dsi_runtime_put(dsidev);
 	dsi_enable_pll_clock(dsidev, 0);
 
-	omap_dss_stop_device(dssdev);
-
 	mutex_unlock(&dsi->lock);
 }
 EXPORT_SYMBOL(omapdss_dsi_display_disable);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 6d1e97c..e7fe182 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -735,23 +735,15 @@ int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
 
 	hdmi.ip_data.hpd_gpio = hdmi.hpd_gpio;
 
-	r = omap_dss_start_device(dssdev);
-	if (r) {
-		DSSERR("failed to start device\n");
-		goto err0;
-	}
-
 	r = hdmi_power_on_full(dssdev);
 	if (r) {
 		DSSERR("failed to power on device\n");
-		goto err1;
+		goto err0;
 	}
 
 	mutex_unlock(&hdmi.lock);
 	return 0;
 
-err1:
-	omap_dss_stop_device(dssdev);
 err0:
 	mutex_unlock(&hdmi.lock);
 	return r;
@@ -765,8 +757,6 @@ void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev)
 
 	hdmi_power_off_full(dssdev);
 
-	omap_dss_stop_device(dssdev);
-
 	mutex_unlock(&hdmi.lock);
 }
 
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index cfcb52f..30ff0e0 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -902,12 +902,6 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
 	if (r)
 		return r;
 
-	r = omap_dss_start_device(dssdev);
-	if (r) {
-		DSSERR("failed to start device\n");
-		goto err0;
-	}
-
 	r = dss_mgr_register_framedone_handler(out->manager,
 			framedone_callback, NULL);
 	if (r) {
@@ -924,8 +918,6 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
 
 	return 0;
 err1:
-	omap_dss_stop_device(dssdev);
-err0:
 	rfbi_runtime_put();
 	return r;
 }
@@ -937,7 +929,6 @@ void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev)
 
 	dss_mgr_unregister_framedone_handler(out->manager,
 			framedone_callback, NULL);
-	omap_dss_stop_device(dssdev);
 
 	rfbi_runtime_put();
 }
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index e723687..ce37c80 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -139,12 +139,6 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 		return -ENODEV;
 	}
 
-	r = omap_dss_start_device(dssdev);
-	if (r) {
-		DSSERR("failed to start device\n");
-		goto err_start_dev;
-	}
-
 	r = regulator_enable(sdi.vdds_sdi_reg);
 	if (r)
 		goto err_reg_enable;
@@ -216,8 +210,6 @@ err_calc_clock_div:
 err_get_dispc:
 	regulator_disable(sdi.vdds_sdi_reg);
 err_reg_enable:
-	omap_dss_stop_device(dssdev);
-err_start_dev:
 	return r;
 }
 EXPORT_SYMBOL(omapdss_sdi_display_enable);
@@ -233,8 +225,6 @@ void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
 	dispc_runtime_put();
 
 	regulator_disable(sdi.vdds_sdi_reg);
-
-	omap_dss_stop_device(dssdev);
 }
 EXPORT_SYMBOL(omapdss_sdi_display_disable);
 
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index af404b4..bac904c 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -513,23 +513,15 @@ int omapdss_venc_display_enable(struct omap_dss_device *dssdev)
 		goto err0;
 	}
 
-	r = omap_dss_start_device(dssdev);
-	if (r) {
-		DSSERR("failed to start device\n");
-		goto err0;
-	}
-
 	r = venc_power_on(dssdev);
 	if (r)
-		goto err1;
+		goto err0;
 
 	venc.wss_data = 0;
 
 	mutex_unlock(&venc.venc_lock);
 
 	return 0;
-err1:
-	omap_dss_stop_device(dssdev);
 err0:
 	mutex_unlock(&venc.venc_lock);
 	return r;
@@ -543,8 +535,6 @@ void omapdss_venc_display_disable(struct omap_dss_device *dssdev)
 
 	venc_power_off(dssdev);
 
-	omap_dss_stop_device(dssdev);
-
 	mutex_unlock(&venc.venc_lock);
 }
 
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index f8e0e64..3aa89c4 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -778,9 +778,6 @@ struct omap_dss_device *omap_dss_find_device(void *data,
 		int (*match)(struct omap_dss_device *dssdev, void *data));
 const char *omapdss_get_default_display_name(void);
 
-int omap_dss_start_device(struct omap_dss_device *dssdev);
-void omap_dss_stop_device(struct omap_dss_device *dssdev);
-
 void videomode_to_omap_video_timings(const struct videomode *vm,
 		struct omap_video_timings *ovt);
 void omap_video_timings_to_videomode(const struct omap_video_timings *ovt,
-- 
1.8.1.2


WARNING: multiple messages have this Message-ID (diff)
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org,
	Archit Taneja <archit@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Subject: [PATCH 26/32] OMAPDSS: remove omap_dss_start/stop_device()
Date: Thu, 30 May 2013 12:34:47 +0300	[thread overview]
Message-ID: <1369906493-27538-27-git-send-email-tomi.valkeinen@ti.com> (raw)
In-Reply-To: <1369906493-27538-1-git-send-email-tomi.valkeinen@ti.com>

The omap_dss_start_device() and omap_dss_stop_device(), called by the
DSS output drivers, are old relics. They originally did something
totally else, but nowadays they increase the module ref count for panels
that are enabled.

This model is quite broken: the panel modules may be used even before
they are enabled. For example, configuring the panel requires calls to
functions located in the panel modules.

In the following patches we try to improve the ref count management for
the modules and display devices. The first step, however, is to remove
the omap_dss_start/stop_device() totally.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/display.c | 20 --------------------
 drivers/video/omap2/dss/dpi.c     | 10 ----------
 drivers/video/omap2/dss/dsi.c     | 10 ----------
 drivers/video/omap2/dss/hdmi.c    | 12 +-----------
 drivers/video/omap2/dss/rfbi.c    |  9 ---------
 drivers/video/omap2/dss/sdi.c     | 10 ----------
 drivers/video/omap2/dss/venc.c    | 12 +-----------
 include/video/omapdss.h           |  3 ---
 8 files changed, 2 insertions(+), 84 deletions(-)

diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index a9a1d55..8096764 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -233,26 +233,6 @@ struct omap_dss_device *omap_dss_find_device(void *data,
 }
 EXPORT_SYMBOL(omap_dss_find_device);
 
-int omap_dss_start_device(struct omap_dss_device *dssdev)
-{
-	if (!dssdev->driver) {
-		DSSDBG("no driver\n");
-		return -ENODEV;
-	}
-
-	if (!try_module_get(dssdev->dev->driver->owner))
-		return -ENODEV;
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_dss_start_device);
-
-void omap_dss_stop_device(struct omap_dss_device *dssdev)
-{
-	module_put(dssdev->dev->driver->owner);
-}
-EXPORT_SYMBOL(omap_dss_stop_device);
-
 void videomode_to_omap_video_timings(const struct videomode *vm,
 		struct omap_video_timings *ovt)
 {
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 66ba9a6..d369927 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -365,12 +365,6 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
 		goto err_no_out_mgr;
 	}
 
-	r = omap_dss_start_device(dssdev);
-	if (r) {
-		DSSERR("failed to start device\n");
-		goto err_start_dev;
-	}
-
 	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI)) {
 		r = regulator_enable(dpi.vdds_dsi_reg);
 		if (r)
@@ -425,8 +419,6 @@ err_get_dispc:
 	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI))
 		regulator_disable(dpi.vdds_dsi_reg);
 err_reg_enable:
-	omap_dss_stop_device(dssdev);
-err_start_dev:
 err_no_out_mgr:
 err_no_reg:
 	mutex_unlock(&dpi.lock);
@@ -453,8 +445,6 @@ void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
 	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI))
 		regulator_disable(dpi.vdds_dsi_reg);
 
-	omap_dss_stop_device(dssdev);
-
 	mutex_unlock(&dpi.lock);
 }
 EXPORT_SYMBOL(omapdss_dpi_display_disable);
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 37ca980..892838e 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4592,12 +4592,6 @@ int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
 
 	mutex_lock(&dsi->lock);
 
-	r = omap_dss_start_device(dssdev);
-	if (r) {
-		DSSERR("failed to start device\n");
-		goto err_start_dev;
-	}
-
 	r = dsi_runtime_get(dsidev);
 	if (r)
 		goto err_get_dsi;
@@ -4618,8 +4612,6 @@ err_init_dsi:
 	dsi_enable_pll_clock(dsidev, 0);
 	dsi_runtime_put(dsidev);
 err_get_dsi:
-	omap_dss_stop_device(dssdev);
-err_start_dev:
 	mutex_unlock(&dsi->lock);
 	DSSDBG("dsi_display_enable FAILED\n");
 	return r;
@@ -4648,8 +4640,6 @@ void omapdss_dsi_display_disable(struct omap_dss_device *dssdev,
 	dsi_runtime_put(dsidev);
 	dsi_enable_pll_clock(dsidev, 0);
 
-	omap_dss_stop_device(dssdev);
-
 	mutex_unlock(&dsi->lock);
 }
 EXPORT_SYMBOL(omapdss_dsi_display_disable);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 6d1e97c..e7fe182 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -735,23 +735,15 @@ int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
 
 	hdmi.ip_data.hpd_gpio = hdmi.hpd_gpio;
 
-	r = omap_dss_start_device(dssdev);
-	if (r) {
-		DSSERR("failed to start device\n");
-		goto err0;
-	}
-
 	r = hdmi_power_on_full(dssdev);
 	if (r) {
 		DSSERR("failed to power on device\n");
-		goto err1;
+		goto err0;
 	}
 
 	mutex_unlock(&hdmi.lock);
 	return 0;
 
-err1:
-	omap_dss_stop_device(dssdev);
 err0:
 	mutex_unlock(&hdmi.lock);
 	return r;
@@ -765,8 +757,6 @@ void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev)
 
 	hdmi_power_off_full(dssdev);
 
-	omap_dss_stop_device(dssdev);
-
 	mutex_unlock(&hdmi.lock);
 }
 
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index cfcb52f..30ff0e0 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -902,12 +902,6 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
 	if (r)
 		return r;
 
-	r = omap_dss_start_device(dssdev);
-	if (r) {
-		DSSERR("failed to start device\n");
-		goto err0;
-	}
-
 	r = dss_mgr_register_framedone_handler(out->manager,
 			framedone_callback, NULL);
 	if (r) {
@@ -924,8 +918,6 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
 
 	return 0;
 err1:
-	omap_dss_stop_device(dssdev);
-err0:
 	rfbi_runtime_put();
 	return r;
 }
@@ -937,7 +929,6 @@ void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev)
 
 	dss_mgr_unregister_framedone_handler(out->manager,
 			framedone_callback, NULL);
-	omap_dss_stop_device(dssdev);
 
 	rfbi_runtime_put();
 }
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index e723687..ce37c80 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -139,12 +139,6 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 		return -ENODEV;
 	}
 
-	r = omap_dss_start_device(dssdev);
-	if (r) {
-		DSSERR("failed to start device\n");
-		goto err_start_dev;
-	}
-
 	r = regulator_enable(sdi.vdds_sdi_reg);
 	if (r)
 		goto err_reg_enable;
@@ -216,8 +210,6 @@ err_calc_clock_div:
 err_get_dispc:
 	regulator_disable(sdi.vdds_sdi_reg);
 err_reg_enable:
-	omap_dss_stop_device(dssdev);
-err_start_dev:
 	return r;
 }
 EXPORT_SYMBOL(omapdss_sdi_display_enable);
@@ -233,8 +225,6 @@ void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
 	dispc_runtime_put();
 
 	regulator_disable(sdi.vdds_sdi_reg);
-
-	omap_dss_stop_device(dssdev);
 }
 EXPORT_SYMBOL(omapdss_sdi_display_disable);
 
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index af404b4..bac904c 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -513,23 +513,15 @@ int omapdss_venc_display_enable(struct omap_dss_device *dssdev)
 		goto err0;
 	}
 
-	r = omap_dss_start_device(dssdev);
-	if (r) {
-		DSSERR("failed to start device\n");
-		goto err0;
-	}
-
 	r = venc_power_on(dssdev);
 	if (r)
-		goto err1;
+		goto err0;
 
 	venc.wss_data = 0;
 
 	mutex_unlock(&venc.venc_lock);
 
 	return 0;
-err1:
-	omap_dss_stop_device(dssdev);
 err0:
 	mutex_unlock(&venc.venc_lock);
 	return r;
@@ -543,8 +535,6 @@ void omapdss_venc_display_disable(struct omap_dss_device *dssdev)
 
 	venc_power_off(dssdev);
 
-	omap_dss_stop_device(dssdev);
-
 	mutex_unlock(&venc.venc_lock);
 }
 
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index f8e0e64..3aa89c4 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -778,9 +778,6 @@ struct omap_dss_device *omap_dss_find_device(void *data,
 		int (*match)(struct omap_dss_device *dssdev, void *data));
 const char *omapdss_get_default_display_name(void);
 
-int omap_dss_start_device(struct omap_dss_device *dssdev);
-void omap_dss_stop_device(struct omap_dss_device *dssdev);
-
 void videomode_to_omap_video_timings(const struct videomode *vm,
 		struct omap_video_timings *ovt);
 void omap_video_timings_to_videomode(const struct omap_video_timings *ovt,
-- 
1.8.1.2


  parent reply	other threads:[~2013-05-30  9:34 UTC|newest]

Thread overview: 120+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-30  9:34 [PATCH 00/32] OMAPDSS: dss-dev-model "base" (Part 1/2) Tomi Valkeinen
2013-05-30  9:34 ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 01/32] OMAPDSS: add pdata->default_display_name Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 02/32] OMAPDSS: only probe pdata if there's one Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 03/32] OMAPDSS: add omap_dss_find_output() Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30 11:07   ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 11:07     ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 11:40     ` Tomi Valkeinen
2013-05-30 11:40       ` Tomi Valkeinen
2013-05-30 15:40       ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 15:40         ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 16:54         ` Tomi Valkeinen
2013-05-30 16:54           ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 04/32] OMAPDSS: add omap_dss_find_output_by_node() Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 05/32] OMAPDSS: fix dss_get_ctx_loss_count for DT Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30 11:09   ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 11:09     ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 11:28     ` Tomi Valkeinen
2013-05-30 11:28       ` Tomi Valkeinen
2013-05-30 15:43       ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 15:43         ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 16:14         ` Tomi Valkeinen
2013-05-30 16:14           ` Tomi Valkeinen
2013-05-30 16:36   ` Kevin Hilman
2013-05-30 16:36     ` Kevin Hilman
2013-05-30 17:21     ` Tomi Valkeinen
2013-05-30 17:21       ` Tomi Valkeinen
2013-05-31 15:17     ` Grygorii Strashko
2013-05-31 15:17       ` Grygorii Strashko
2013-05-31 19:31       ` Kevin Hilman
2013-05-31 19:31         ` Kevin Hilman
2013-05-30  9:34 ` [PATCH 06/32] OMAPDSS: DPI: fix regulators " Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30 11:12   ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 11:12     ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 11:35     ` Tomi Valkeinen
2013-05-30 11:35       ` Tomi Valkeinen
2013-05-30 13:05       ` Arnd Bergmann
2013-05-30 13:05         ` Arnd Bergmann
2013-05-30 15:54         ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 15:54           ` Jean-Christophe PLAGNIOL-VILLARD
2013-06-07  5:56   ` Archit Taneja
2013-06-07  5:57     ` Archit Taneja
2013-05-30  9:34 ` [PATCH 07/32] OMAPDSS: SDI: " Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 08/32] OMAPDSS: clean up dss_[ovl|mgr]_get_device() Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 09/32] OMAPDSS: add helpers to get mgr or output from display Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 10/32] OMAPDSS: split overlay manager creation Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-06-07  6:19   ` Archit Taneja
2013-06-07  6:31     ` Archit Taneja
2013-06-07  9:53     ` Tomi Valkeinen
2013-06-07  9:53       ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 11/32] OMAPDRM: fix overlay manager handling Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-06-07  6:21   ` Archit Taneja
2013-06-07  6:33     ` Archit Taneja
2013-05-30  9:34 ` [PATCH 12/32] OMAPDSS: Implement display (dis)connect support Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-06-07  6:46   ` Archit Taneja
2013-06-07  6:58     ` Archit Taneja
2013-06-07  8:31     ` Tomi Valkeinen
2013-06-07  8:31       ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 13/32] OMAPDSS: CORE: use devm_regulator_get Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 14/32] OMAPDSS: DSI: cleanup regulator init Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-06-07  6:49   ` Archit Taneja
2013-06-07  6:50     ` Archit Taneja
2013-05-30  9:34 ` [PATCH 15/32] OMAPDSS: DPI: cleanup pll & " Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-06-07  6:51   ` Archit Taneja
2013-06-07  6:52     ` Archit Taneja
2013-06-07  8:45     ` Tomi Valkeinen
2013-06-07  8:45       ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 16/32] OMAPDSS: HDMI: add hdmi_init_regulator Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 17/32] OMAPDSS: SDI: clean up regulator init Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 18/32] OMAPDSS: VENC: " Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 19/32] OMAPDSS: add videomode conversion support Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-06-07  7:06   ` Archit Taneja
2013-06-07  7:18     ` Archit Taneja
2013-06-07  8:35     ` Tomi Valkeinen
2013-06-07  8:35       ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 20/32] OMAPDSS: remove dssdev uses in trivial cases Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 21/32] OMAPDSS: add panel list Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 22/32] OMAPDSS: use the panel list in omap_dss_get_next_device Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 23/32] OMAPDSS: don't use dss bus in suspend/resume Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 24/32] OMAPDSS: implement display sysfs without dss bus Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 25/32] OMAPDSS: Add panel dev pointer to dssdev Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` Tomi Valkeinen [this message]
2013-05-30  9:34   ` [PATCH 26/32] OMAPDSS: remove omap_dss_start/stop_device() Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 27/32] OMAPDSS: combine omap_dss_output into omap_dss_device Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 28/32] OMAPDSS: omapdss.h: add owner field to omap_dss_device Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 29/32] OMAPDSS: add module_get/put to omap_dss_get/put_device() Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 30/32] OMAPDSS: add THIS_MODULE owner to DSS outputs Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 31/32] OMAPDSS: output: increase refcount in find_output funcs Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen
2013-05-30  9:34 ` [PATCH 32/32] OMAPFB: use EPROBE_DEFER if default display is not present Tomi Valkeinen
2013-05-30  9:34   ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1369906493-27538-27-git-send-email-tomi.valkeinen@ti.com \
    --to=tomi.valkeinen@ti.com \
    --cc=archit@ti.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.