All of lore.kernel.org
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <stern@rowland.harvard.edu>, <balbi@ti.com>, <arnd@arndb.de>,
	<adrienverge@gmail.com>, <kishon@ti.com>,
	<linux-usb@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v2 2/2] USB: ehci-omap: select NOP_USB_XCEIV PHY driver
Date: Fri, 31 May 2013 14:29:03 +0300	[thread overview]
Message-ID: <1369999743-11758-3-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1369999743-11758-1-git-send-email-rogerq@ti.com>

ehci-omap needs NOP_USB_XCEIV PHY driver to function
properly, so select it. As the USB PHY drivers no longer
depend on USB_PHY, it is safe to select the PHY drivers.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Adrien Vergé <adrienverge@gmail.com>
---
 drivers/usb/host/Kconfig |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 7ded784..48e1b70 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -150,13 +150,11 @@ config USB_EHCI_MXC
 config USB_EHCI_HCD_OMAP
 	tristate "EHCI support for OMAP3 and later chips"
 	depends on ARCH_OMAP
+	select NOP_USB_XCEIV
 	default y
 	---help---
 	  Enables support for the on-chip EHCI controller on
 	  OMAP3 and later chips.
-	  If your system uses a PHY on the USB port, you will need to
-	  enable USB_PHY and the appropriate PHY driver as well. Most
-	  boards need the NOP_USB_XCEIV PHY driver.
 
 config USB_EHCI_HCD_ORION
 	tristate  "Support for Marvell EBU on-chip EHCI USB controller"
-- 
1.7.4.1


WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com>
To: gregkh@linuxfoundation.org
Cc: stern@rowland.harvard.edu, balbi@ti.com, arnd@arndb.de,
	adrienverge@gmail.com, kishon@ti.com, linux-usb@vger.kernel.org,
	linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
	Roger Quadros <rogerq@ti.com>
Subject: [PATCH v2 2/2] USB: ehci-omap: select NOP_USB_XCEIV PHY driver
Date: Fri, 31 May 2013 14:29:03 +0300	[thread overview]
Message-ID: <1369999743-11758-3-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1369999743-11758-1-git-send-email-rogerq@ti.com>

ehci-omap needs NOP_USB_XCEIV PHY driver to function
properly, so select it. As the USB PHY drivers no longer
depend on USB_PHY, it is safe to select the PHY drivers.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Adrien Vergé <adrienverge@gmail.com>
---
 drivers/usb/host/Kconfig |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 7ded784..48e1b70 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -150,13 +150,11 @@ config USB_EHCI_MXC
 config USB_EHCI_HCD_OMAP
 	tristate "EHCI support for OMAP3 and later chips"
 	depends on ARCH_OMAP
+	select NOP_USB_XCEIV
 	default y
 	---help---
 	  Enables support for the on-chip EHCI controller on
 	  OMAP3 and later chips.
-	  If your system uses a PHY on the USB port, you will need to
-	  enable USB_PHY and the appropriate PHY driver as well. Most
-	  boards need the NOP_USB_XCEIV PHY driver.
 
 config USB_EHCI_HCD_ORION
 	tristate  "Support for Marvell EBU on-chip EHCI USB controller"
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2013-05-31 11:29 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-31 11:29 [PATCH v2 0/2] USB: PHY: Improve PHY selection logic Roger Quadros
2013-05-31 11:29 ` Roger Quadros
2013-05-31 11:29 ` [PATCH v2 1/2] USB: PHY: Make PHY driver selection possible by controller drivers Roger Quadros
2013-05-31 11:29   ` Roger Quadros
2013-05-31 11:29 ` Roger Quadros [this message]
2013-05-31 11:29   ` [PATCH v2 2/2] USB: ehci-omap: select NOP_USB_XCEIV PHY driver Roger Quadros
2013-06-03 17:47 ` [PATCH v2 0/2] USB: PHY: Improve PHY selection logic Greg KH
2013-06-04  7:16   ` Roger Quadros
2013-06-04  7:16     ` Roger Quadros
2013-06-04 20:26     ` Felipe Balbi
2013-06-04 20:26       ` Felipe Balbi
2013-06-05  9:38       ` Roger Quadros
2013-06-05  9:38         ` Roger Quadros
2013-06-13  1:33 ` Felipe Balbi
2013-06-13  1:33   ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1369999743-11758-3-git-send-email-rogerq@ti.com \
    --to=rogerq@ti.com \
    --cc=adrienverge@gmail.com \
    --cc=arnd@arndb.de \
    --cc=balbi@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.