[PATCH V5 12/30] thermal: exynos: Fix to clear only the generated interrupts

[Amit Daniel Kachhap <amit.daniel@samsung.com>]

This patch uses the TMU status register to know the generated interrupts
and only clear them in the interrupt handler.

Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/samsung/exynos_tmu.c      |   11 +++++------
 drivers/thermal/samsung/exynos_tmu_data.c |    2 ++
 2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 33f494e..f6f63ca 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -351,17 +351,16 @@ static void exynos_tmu_work(struct work_struct *work)
 			struct exynos_tmu_data, irq_work);
 	struct exynos_tmu_platform_data *pdata = data->pdata;
 	const struct exynos_tmu_registers *reg = pdata->registers;
+	unsigned int val_irq;
 
 	exynos_report_trigger();
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
 
-	if (data->soc == SOC_ARCH_EXYNOS)
-		writel((reg->inten_rise_mask << reg->inten_rise_shift) |
-			(reg->inten_fall_mask << reg->inten_fall_shift),
-				data->base + reg->tmu_intclear);
-	else
-		writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
+	/* TODO: take action based on particular interrupt */
+	val_irq = readl(data->base + reg->tmu_intstat);
+	/* clear the interrupts */
+	writel(val_irq, data->base + reg->tmu_intclear);
 
 	clk_disable(data->clk);
 	mutex_unlock(&data->lock);
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index e7cb1cc..7fcf183 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -45,6 +45,7 @@ static const struct exynos_tmu_registers exynos4210_tmu_registers = {
 	.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
 	.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
 	.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
+	.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
 	.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
 };
 struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
@@ -112,6 +113,7 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = {
 	.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
 	.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
 	.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
+	.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
 	.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
 	.emul_con = EXYNOS_EMUL_CON,
 	.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
-- 
1.7.1