From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 16/18] ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree
Date: Thu, 13 Jun 2013 23:46:01 +0000 [thread overview]
Message-ID: <1371167163-10507-17-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <1371167163-10507-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 8ec4cd1..366f729 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -34,6 +34,21 @@
regulator-boot-on;
};
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+ };
+ led2 {
+ gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+ };
+ led3 {
+ gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+ };
+ led4 {
+ gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&i2c0 {
--
1.8.1.5
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: linux-sh@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
Linus Walleij <linus.walleij@linaro.org>,
Magnus Damm <damm@opensource.se>,
Simon Horman <horms@verge.net.au>
Subject: [PATCH v6 16/18] ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree
Date: Fri, 14 Jun 2013 01:46:01 +0200 [thread overview]
Message-ID: <1371167163-10507-17-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <1371167163-10507-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 8ec4cd1..366f729 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -34,6 +34,21 @@
regulator-boot-on;
};
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+ };
+ led2 {
+ gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+ };
+ led3 {
+ gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+ };
+ led4 {
+ gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&i2c0 {
--
1.8.1.5
WARNING: multiple messages have this Message-ID (diff)
From: laurent.pinchart+renesas@ideasonboard.com (Laurent Pinchart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 16/18] ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree
Date: Fri, 14 Jun 2013 01:46:01 +0200 [thread overview]
Message-ID: <1371167163-10507-17-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <1371167163-10507-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 8ec4cd1..366f729 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -34,6 +34,21 @@
regulator-boot-on;
};
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+ };
+ led2 {
+ gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+ };
+ led3 {
+ gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+ };
+ led4 {
+ gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&i2c0 {
--
1.8.1.5
next prev parent reply other threads:[~2013-06-13 23:46 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-13 23:45 [PATCH v6 00/18] SH pinctrl DT support Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 01/18] sh-pfc: Remove support for platform data Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 02/18] sh-pfc: Add DT support Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-17 3:08 ` Laurent Pinchart
2013-06-17 3:08 ` Laurent Pinchart
2013-06-17 3:08 ` Laurent Pinchart
2013-06-17 7:03 ` Simon Horman
2013-06-17 7:03 ` Simon Horman
2013-06-17 7:03 ` Simon Horman
2013-06-17 11:00 ` Laurent Pinchart
2013-06-17 11:00 ` Laurent Pinchart
2013-06-17 11:00 ` Laurent Pinchart
2013-06-17 11:28 ` Linus Walleij
2013-06-17 11:28 ` Linus Walleij
2013-06-17 11:28 ` Linus Walleij
2013-06-17 11:51 ` Laurent Pinchart
2013-06-17 11:51 ` Laurent Pinchart
2013-06-17 11:51 ` Laurent Pinchart
2013-06-17 16:28 ` Linus Walleij
2013-06-17 16:28 ` Linus Walleij
2013-06-17 16:28 ` Linus Walleij
2013-06-13 23:45 ` [PATCH v6 03/18] ARM: shmobile: r8a73a4: Add pin control device to device tree Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 04/18] ARM: shmobile: r8a7740: " Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 05/18] ARM: shmobile: r8a7778: " Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 06/18] ARM: shmobile: r8a7778: Add GPIO controller devices " Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 07/18] ARM: shmobile: r8a7779: Add pin control device " Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 08/18] ARM: shmobile: r8a7779: Add GPIO controller devices " Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 09/18] ARM: shmobile: r8a7790: Add pin control device " Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 10/18] ARM: shmobile: r8a7790: Add GPIO controller devices " Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 11/18] ARM: shmobile: sh7372: Add pin control device " Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 12/18] ARM: shmobile: sh73a0: " Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 13/18] ARM: shmobile: armadillo-reference: Move pinctrl mappings " Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` [PATCH v6 14/18] ARM: shmobile: armadillo-reference: Add st1232 pin mappings Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:45 ` Laurent Pinchart
2013-06-13 23:46 ` [PATCH v6 15/18] ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT Laurent Pinchart
2013-06-13 23:46 ` Laurent Pinchart
2013-06-13 23:46 ` Laurent Pinchart
2013-06-13 23:46 ` Laurent Pinchart [this message]
2013-06-13 23:46 ` [PATCH v6 16/18] ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree Laurent Pinchart
2013-06-13 23:46 ` Laurent Pinchart
2013-06-13 23:46 ` [PATCH v6 17/18] ARM: shmobile: marzen-reference: Move pinctrl mappings to " Laurent Pinchart
2013-06-13 23:46 ` Laurent Pinchart
2013-06-13 23:46 ` Laurent Pinchart
2013-06-13 23:46 ` [PATCH v6 18/18] ARM: shmobile: marzen-reference: Add LED2-LED4 to the " Laurent Pinchart
2013-06-13 23:46 ` Laurent Pinchart
2013-06-13 23:46 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371167163-10507-17-git-send-email-laurent.pinchart+renesas@ideasonboard.com \
--to=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.