From: Fabio Baltieri <fabio.baltieri@linaro.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>,
Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Fabio Baltieri <fabio.baltieri@linaro.org>
Subject: [PATCH] ARM: ux500: add restart support via prcmu
Date: Fri, 14 Jun 2013 15:22:40 +0200 [thread overview]
Message-ID: <1371216160-2595-1-git-send-email-fabio.baltieri@linaro.org> (raw)
Add necessary code to restart ux500 based machines using
prcmu_system_reset().
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
---
Hi Linus,
this is something I had in my tree for some time. This adds basic
soft-reboot support for all ux500 machines using prcmu (the actual
reboot code was already there) and may also be useful as a base to add
the remaining "reboot reason" code if necessary.
This is based on your current ste-next branch.
Thanks,
Fabio
arch/arm/mach-ux500/board-mop500.c | 4 ++++
arch/arm/mach-ux500/cpu-db8500.c | 1 +
arch/arm/mach-ux500/cpu.c | 8 ++++++++
arch/arm/mach-ux500/setup.h | 2 ++
4 files changed, 15 insertions(+)
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 2d70e2b..bb569bf 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -697,6 +697,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
.init_time = ux500_timer_init,
.init_machine = mop500_init_machine,
.init_late = ux500_init_late,
+ .restart = ux500_restart,
MACHINE_END
MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
@@ -706,6 +707,7 @@ MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
.init_time = ux500_timer_init,
.init_machine = mop500_init_machine,
.init_late = ux500_init_late,
+ .restart = ux500_restart,
MACHINE_END
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
@@ -716,6 +718,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
.init_time = ux500_timer_init,
.init_machine = hrefv60_init_machine,
.init_late = ux500_init_late,
+ .restart = ux500_restart,
MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
@@ -727,4 +730,5 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
.init_time = ux500_timer_init,
.init_machine = snowball_init_machine,
.init_late = NULL,
+ .restart = ux500_restart,
MACHINE_END
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 27e5566..caded58 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -326,6 +326,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
.init_machine = u8500_init_machine,
.init_late = NULL,
.dt_compat = stericsson_dt_platform_compat,
+ .restart = ux500_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index b6145ea..7490224 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -31,6 +31,14 @@
#include "db8500-regs.h"
#include "id.h"
+void ux500_restart(char mode, const char *cmd)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ prcmu_system_reset(0);
+}
+
/*
* FIXME: Should we set up the GPIO domain here?
*
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index cad3ca8..e8be021 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -15,6 +15,8 @@
#include <linux/init.h>
#include <linux/mfd/abx500/ab8500.h>
+void ux500_restart(char mode, const char *cmd);
+
void __init ux500_map_io(void);
extern void __init u8500_map_io(void);
--
1.8.2
WARNING: multiple messages have this Message-ID (diff)
From: fabio.baltieri@linaro.org (Fabio Baltieri)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: ux500: add restart support via prcmu
Date: Fri, 14 Jun 2013 15:22:40 +0200 [thread overview]
Message-ID: <1371216160-2595-1-git-send-email-fabio.baltieri@linaro.org> (raw)
Add necessary code to restart ux500 based machines using
prcmu_system_reset().
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
---
Hi Linus,
this is something I had in my tree for some time. This adds basic
soft-reboot support for all ux500 machines using prcmu (the actual
reboot code was already there) and may also be useful as a base to add
the remaining "reboot reason" code if necessary.
This is based on your current ste-next branch.
Thanks,
Fabio
arch/arm/mach-ux500/board-mop500.c | 4 ++++
arch/arm/mach-ux500/cpu-db8500.c | 1 +
arch/arm/mach-ux500/cpu.c | 8 ++++++++
arch/arm/mach-ux500/setup.h | 2 ++
4 files changed, 15 insertions(+)
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 2d70e2b..bb569bf 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -697,6 +697,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
.init_time = ux500_timer_init,
.init_machine = mop500_init_machine,
.init_late = ux500_init_late,
+ .restart = ux500_restart,
MACHINE_END
MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
@@ -706,6 +707,7 @@ MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
.init_time = ux500_timer_init,
.init_machine = mop500_init_machine,
.init_late = ux500_init_late,
+ .restart = ux500_restart,
MACHINE_END
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
@@ -716,6 +718,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
.init_time = ux500_timer_init,
.init_machine = hrefv60_init_machine,
.init_late = ux500_init_late,
+ .restart = ux500_restart,
MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
@@ -727,4 +730,5 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
.init_time = ux500_timer_init,
.init_machine = snowball_init_machine,
.init_late = NULL,
+ .restart = ux500_restart,
MACHINE_END
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 27e5566..caded58 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -326,6 +326,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
.init_machine = u8500_init_machine,
.init_late = NULL,
.dt_compat = stericsson_dt_platform_compat,
+ .restart = ux500_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index b6145ea..7490224 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -31,6 +31,14 @@
#include "db8500-regs.h"
#include "id.h"
+void ux500_restart(char mode, const char *cmd)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ prcmu_system_reset(0);
+}
+
/*
* FIXME: Should we set up the GPIO domain here?
*
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index cad3ca8..e8be021 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -15,6 +15,8 @@
#include <linux/init.h>
#include <linux/mfd/abx500/ab8500.h>
+void ux500_restart(char mode, const char *cmd);
+
void __init ux500_map_io(void);
extern void __init u8500_map_io(void);
--
1.8.2
next reply other threads:[~2013-06-14 13:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-14 13:22 Fabio Baltieri [this message]
2013-06-14 13:22 ` [PATCH] ARM: ux500: add restart support via prcmu Fabio Baltieri
2013-06-17 16:53 ` Linus Walleij
2013-06-17 16:53 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371216160-2595-1-git-send-email-fabio.baltieri@linaro.org \
--to=fabio.baltieri@linaro.org \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=srinidhi.kasagar@stericsson.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.