All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boris BREZILLON <b.brezillon@overkiz.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>,
	Ludovic Desroches <ludovic.desroches@atmel.com>,
	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
	Chris Ball <cjb@laptop.org>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
	Boris BREZILLON <b.brezillon@overkiz.com>
Subject: [PATCH 2/8] at_hdmac: prepare clk before calling enable
Date: Wed, 19 Jun 2013 13:15:44 +0200	[thread overview]
Message-ID: <1371640544-9515-1-git-send-email-b.brezillon@overkiz.com> (raw)
In-Reply-To: <1371640263-9268-1-git-send-email-b.brezillon@overkiz.com>

Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to
avoid common clk framework warnings.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
 drivers/dma/at_hdmac.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index e923cda..19a484a 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -1374,7 +1374,9 @@ static int __init at_dma_probe(struct platform_device *pdev)
 		err = PTR_ERR(atdma->clk);
 		goto err_clk;
 	}
-	clk_enable(atdma->clk);
+	err = clk_prepare_enable(atdma->clk);
+	if (err)
+		goto err_clk_prepare;
 
 	/* force dma off, just in case */
 	at_dma_off(atdma);
@@ -1475,7 +1477,8 @@ err_pool_create:
 	platform_set_drvdata(pdev, NULL);
 	free_irq(platform_get_irq(pdev, 0), atdma);
 err_irq:
-	clk_disable(atdma->clk);
+	clk_disable_unprepare(atdma->clk);
+err_clk_prepare:
 	clk_put(atdma->clk);
 err_clk:
 	iounmap(atdma->regs);
@@ -1512,7 +1515,7 @@ static int at_dma_remove(struct platform_device *pdev)
 		list_del(&chan->device_node);
 	}
 
-	clk_disable(atdma->clk);
+	clk_disable_unprepare(atdma->clk);
 	clk_put(atdma->clk);
 
 	iounmap(atdma->regs);
@@ -1531,7 +1534,7 @@ static void at_dma_shutdown(struct platform_device *pdev)
 	struct at_dma	*atdma = platform_get_drvdata(pdev);
 
 	at_dma_off(platform_get_drvdata(pdev));
-	clk_disable(atdma->clk);
+	clk_disable_unprepare(atdma->clk);
 }
 
 static int at_dma_prepare(struct device *dev)
@@ -1588,7 +1591,7 @@ static int at_dma_suspend_noirq(struct device *dev)
 
 	/* disable DMA controller */
 	at_dma_off(atdma);
-	clk_disable(atdma->clk);
+	clk_disable_unprepare(atdma->clk);
 	return 0;
 }
 
@@ -1618,7 +1621,9 @@ static int at_dma_resume_noirq(struct device *dev)
 	struct dma_chan *chan, *_chan;
 
 	/* bring back DMA controller */
-	clk_enable(atdma->clk);
+	err = clk_prepare_enable(atdma->clk);
+	if (err)
+		return err;
 	dma_writel(atdma, EN, AT_DMA_ENABLE);
 
 	/* clear any pending interrupt */
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: b.brezillon@overkiz.com (Boris BREZILLON)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/8] at_hdmac: prepare clk before calling enable
Date: Wed, 19 Jun 2013 13:15:44 +0200	[thread overview]
Message-ID: <1371640544-9515-1-git-send-email-b.brezillon@overkiz.com> (raw)
In-Reply-To: <1371640263-9268-1-git-send-email-b.brezillon@overkiz.com>

Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to
avoid common clk framework warnings.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
 drivers/dma/at_hdmac.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index e923cda..19a484a 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -1374,7 +1374,9 @@ static int __init at_dma_probe(struct platform_device *pdev)
 		err = PTR_ERR(atdma->clk);
 		goto err_clk;
 	}
-	clk_enable(atdma->clk);
+	err = clk_prepare_enable(atdma->clk);
+	if (err)
+		goto err_clk_prepare;
 
 	/* force dma off, just in case */
 	at_dma_off(atdma);
@@ -1475,7 +1477,8 @@ err_pool_create:
 	platform_set_drvdata(pdev, NULL);
 	free_irq(platform_get_irq(pdev, 0), atdma);
 err_irq:
-	clk_disable(atdma->clk);
+	clk_disable_unprepare(atdma->clk);
+err_clk_prepare:
 	clk_put(atdma->clk);
 err_clk:
 	iounmap(atdma->regs);
@@ -1512,7 +1515,7 @@ static int at_dma_remove(struct platform_device *pdev)
 		list_del(&chan->device_node);
 	}
 
-	clk_disable(atdma->clk);
+	clk_disable_unprepare(atdma->clk);
 	clk_put(atdma->clk);
 
 	iounmap(atdma->regs);
@@ -1531,7 +1534,7 @@ static void at_dma_shutdown(struct platform_device *pdev)
 	struct at_dma	*atdma = platform_get_drvdata(pdev);
 
 	at_dma_off(platform_get_drvdata(pdev));
-	clk_disable(atdma->clk);
+	clk_disable_unprepare(atdma->clk);
 }
 
 static int at_dma_prepare(struct device *dev)
@@ -1588,7 +1591,7 @@ static int at_dma_suspend_noirq(struct device *dev)
 
 	/* disable DMA controller */
 	at_dma_off(atdma);
-	clk_disable(atdma->clk);
+	clk_disable_unprepare(atdma->clk);
 	return 0;
 }
 
@@ -1618,7 +1621,9 @@ static int at_dma_resume_noirq(struct device *dev)
 	struct dma_chan *chan, *_chan;
 
 	/* bring back DMA controller */
-	clk_enable(atdma->clk);
+	err = clk_prepare_enable(atdma->clk);
+	if (err)
+		return err;
 	dma_writel(atdma, EN, AT_DMA_ENABLE);
 
 	/* clear any pending interrupt */
-- 
1.7.9.5

  parent reply	other threads:[~2013-06-19 11:33 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-19 11:11 [PATCH 0/8] ARM: at91: prepare the move to common clk framework Boris BREZILLON
2013-06-19 11:11 ` Boris BREZILLON
2013-06-19 11:13 ` [PATCH 1/8] ARM: at91/tc/clocksource: replace clk_enable/disable with clk_prepare_enable/disable_unprepare Boris BREZILLON
2013-06-19 11:13   ` Boris BREZILLON
2013-06-20  7:33   ` Nicolas Ferre
2013-06-20  7:33     ` Nicolas Ferre
2013-06-19 11:14 ` [PATCH 2/8] at_hdmac: prepare clk before calling enable Boris BREZILLON
2013-06-19 11:14   ` Boris BREZILLON
2013-06-20  7:43   ` Nicolas Ferre
2013-06-20  7:43     ` Nicolas Ferre
2013-06-21  2:40     ` Vinod Koul
2013-06-21  2:40       ` Vinod Koul
2013-06-24 17:40       ` Nicolas Ferre
2013-06-24 17:40         ` Nicolas Ferre
2013-06-19 11:15 ` Boris BREZILLON [this message]
2013-06-19 11:15   ` Boris BREZILLON
2013-06-19 11:16 ` [PATCH 3/8] mmc: atmel-mci: " Boris BREZILLON
2013-06-19 11:16   ` Boris BREZILLON
2013-06-19 11:16   ` Boris BREZILLON
2013-06-19 12:50   ` Ludovic Desroches
2013-06-19 12:50   ` Ludovic Desroches
2013-06-19 11:17 ` [PATCH 4/8] tty: atmel_serial: " Boris BREZILLON
2013-06-19 11:17   ` Boris BREZILLON
2013-06-19 11:17   ` Boris BREZILLON
2013-06-20  7:48   ` Nicolas Ferre
2013-06-20  7:48     ` Nicolas Ferre
2013-06-20  7:48     ` Nicolas Ferre
2013-06-20  8:06     ` boris brezillon
2013-06-20  8:06       ` boris brezillon
2013-06-20 10:20       ` Nicolas Ferre
2013-06-20 10:20         ` Nicolas Ferre
2013-06-20 10:20         ` Nicolas Ferre
2013-06-19 11:18 ` [PATCH 5/8] usb: gadget: at91_udc: " Boris BREZILLON
2013-06-19 11:18   ` Boris BREZILLON
2013-06-19 11:20 ` [PATCH 6/8] ehci-atmel.c: " Boris BREZILLON
2013-06-19 11:20   ` Boris BREZILLON
2013-06-19 11:21 ` [PATCH 7/8] USB: ohci-at91: " Boris BREZILLON
2013-06-19 11:21   ` Boris BREZILLON
2013-06-19 11:22 ` [PATCH 8/8] at91/avr32/atmel_lcdfb: " Boris BREZILLON
2013-06-19 11:22   ` Boris BREZILLON
2013-06-19 11:22   ` Boris BREZILLON
2013-06-20  7:49   ` Nicolas Ferre
2013-06-20  7:49     ` Nicolas Ferre
2013-06-20  7:49     ` Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371640544-9515-1-git-send-email-b.brezillon@overkiz.com \
    --to=b.brezillon@overkiz.com \
    --cc=cjb@laptop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ludovic.desroches@atmel.com \
    --cc=nicolas.ferre@atmel.com \
    --cc=plagnioj@jcrosoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.