From: Roger Quadros <rogerq@ti.com>
To: <stern@rowland.harvard.edu>, <tony@atomide.com>
Cc: <balbi@ti.com>, <ruslan.bilovol@ti.com>,
<linux-usb@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Roger Quadros <rogerq@ti.com>
Subject: [RFC PATCH 6/6] ARM: OMAP3: Enable Hardware Save and Restore for USB Host
Date: Wed, 19 Jun 2013 17:05:53 +0300 [thread overview]
Message-ID: <1371650753-11452-7-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1371650753-11452-1-git-send-email-rogerq@ti.com>
To ensure hardware context is restored while resuming from
OFF mode we need to enable the Hardware SAR bit for the
USB Host power domain.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/mach-omap2/powerdomains3xxx_data.c | 8 +-------
1 files changed, 1 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index f0e14e9..9554d2b 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -289,13 +289,7 @@ static struct powerdomain usbhost_pwrdm = {
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
- /*
- * REVISIT: Enabling usb host save and restore mechanism seems to
- * leave the usb host domain permanently in ACTIVE mode after
- * changing the usb host power domain state from OFF to active once.
- * Disabling for now.
- */
- /*.flags = PWRDM_HAS_HDWR_SAR,*/ /* for USBHOST ctrlr only */
+ .flags = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_RET, /* MEMRETSTATE */
--
1.7.4.1
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com>
To: stern@rowland.harvard.edu, tony@atomide.com
Cc: balbi@ti.com, ruslan.bilovol@ti.com, linux-usb@vger.kernel.org,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Roger Quadros <rogerq@ti.com>
Subject: [RFC PATCH 6/6] ARM: OMAP3: Enable Hardware Save and Restore for USB Host
Date: Wed, 19 Jun 2013 17:05:53 +0300 [thread overview]
Message-ID: <1371650753-11452-7-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1371650753-11452-1-git-send-email-rogerq@ti.com>
To ensure hardware context is restored while resuming from
OFF mode we need to enable the Hardware SAR bit for the
USB Host power domain.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/mach-omap2/powerdomains3xxx_data.c | 8 +-------
1 files changed, 1 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index f0e14e9..9554d2b 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -289,13 +289,7 @@ static struct powerdomain usbhost_pwrdm = {
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
- /*
- * REVISIT: Enabling usb host save and restore mechanism seems to
- * leave the usb host domain permanently in ACTIVE mode after
- * changing the usb host power domain state from OFF to active once.
- * Disabling for now.
- */
- /*.flags = PWRDM_HAS_HDWR_SAR,*/ /* for USBHOST ctrlr only */
+ .flags = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_RET, /* MEMRETSTATE */
--
1.7.4.1
WARNING: multiple messages have this Message-ID (diff)
From: rogerq@ti.com (Roger Quadros)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 6/6] ARM: OMAP3: Enable Hardware Save and Restore for USB Host
Date: Wed, 19 Jun 2013 17:05:53 +0300 [thread overview]
Message-ID: <1371650753-11452-7-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1371650753-11452-1-git-send-email-rogerq@ti.com>
To ensure hardware context is restored while resuming from
OFF mode we need to enable the Hardware SAR bit for the
USB Host power domain.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/mach-omap2/powerdomains3xxx_data.c | 8 +-------
1 files changed, 1 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index f0e14e9..9554d2b 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -289,13 +289,7 @@ static struct powerdomain usbhost_pwrdm = {
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
- /*
- * REVISIT: Enabling usb host save and restore mechanism seems to
- * leave the usb host domain permanently in ACTIVE mode after
- * changing the usb host power domain state from OFF to active once.
- * Disabling for now.
- */
- /*.flags = PWRDM_HAS_HDWR_SAR,*/ /* for USBHOST ctrlr only */
+ .flags = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_RET, /* MEMRETSTATE */
--
1.7.4.1
next prev parent reply other threads:[~2013-06-19 14:06 UTC|newest]
Thread overview: 144+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-19 14:05 [RFC PATCH 0/6] Suspend USB Host controller on bus suspend Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-19 14:05 ` [RFC PATCH 1/6] mfd: omap-usb-host: move initialization to module_init() Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-20 12:07 ` Felipe Balbi
2013-06-20 12:07 ` Felipe Balbi
2013-06-20 12:07 ` Felipe Balbi
2013-06-20 12:29 ` Roger Quadros
2013-06-20 12:29 ` Roger Quadros
2013-06-20 12:29 ` Roger Quadros
2013-06-19 14:05 ` [RFC PATCH 2/6] mfd: omap-usb-host: Put pins in IDLE state on suspend Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-19 17:23 ` Kevin Hilman
2013-06-19 17:23 ` Kevin Hilman
2013-06-19 17:23 ` Kevin Hilman
2013-06-20 7:21 ` Tony Lindgren
2013-06-20 7:21 ` Tony Lindgren
2013-06-20 12:30 ` Roger Quadros
2013-06-20 12:30 ` Roger Quadros
2013-06-20 12:30 ` Roger Quadros
2013-06-19 14:05 ` [RFC PATCH 3/6] USB: ehci: allow controller drivers to override irq & bus_suspend/resume Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-19 14:05 ` [RFC PATCH 4/6] USB: ehci-omap: Suspend the controller during bus suspend Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-19 17:39 ` Kevin Hilman
2013-06-19 17:39 ` Kevin Hilman
2013-06-19 17:39 ` Kevin Hilman
2013-06-20 12:32 ` Roger Quadros
2013-06-20 12:32 ` Roger Quadros
2013-06-20 12:32 ` Roger Quadros
2013-06-20 12:11 ` Felipe Balbi
2013-06-20 12:11 ` Felipe Balbi
2013-06-20 12:11 ` Felipe Balbi
2013-06-20 12:35 ` Roger Quadros
2013-06-20 12:35 ` Roger Quadros
2013-06-20 12:35 ` Roger Quadros
2013-06-20 17:33 ` Alan Stern
2013-06-20 17:33 ` Alan Stern
2013-06-20 17:33 ` Alan Stern
2013-06-24 15:09 ` Roger Quadros
2013-06-24 15:09 ` Roger Quadros
2013-06-24 15:09 ` Roger Quadros
2013-06-24 19:34 ` Alan Stern
2013-06-24 19:34 ` Alan Stern
2013-06-24 19:34 ` Alan Stern
2013-06-25 13:59 ` Roger Quadros
2013-06-25 13:59 ` Roger Quadros
2013-06-25 13:59 ` Roger Quadros
2013-06-25 17:38 ` Alan Stern
2013-06-25 17:38 ` Alan Stern
2013-06-25 17:38 ` Alan Stern
2013-06-26 13:38 ` Roger Quadros
2013-06-26 13:38 ` Roger Quadros
2013-06-26 13:38 ` Roger Quadros
2013-06-27 15:40 ` Alan Stern
2013-06-27 15:40 ` Alan Stern
2013-06-27 15:40 ` Alan Stern
2013-06-28 12:20 ` Roger Quadros
2013-06-28 12:20 ` Roger Quadros
2013-06-28 12:20 ` Roger Quadros
2013-06-28 13:57 ` Roger Quadros
2013-06-28 13:57 ` Roger Quadros
2013-06-28 13:57 ` Roger Quadros
2013-06-28 19:18 ` Alan Stern
2013-06-28 19:18 ` Alan Stern
2013-06-28 19:18 ` Alan Stern
2013-07-01 8:33 ` Roger Quadros
2013-07-01 8:33 ` Roger Quadros
2013-07-01 8:33 ` Roger Quadros
2013-06-28 19:06 ` Alan Stern
2013-06-28 19:06 ` Alan Stern
2013-06-28 19:06 ` Alan Stern
2013-07-01 8:16 ` Roger Quadros
2013-07-01 8:16 ` Roger Quadros
2013-07-01 8:16 ` Roger Quadros
2013-07-01 16:24 ` Alan Stern
2013-07-01 16:24 ` Alan Stern
2013-07-01 16:24 ` Alan Stern
2013-07-01 16:49 ` Felipe Balbi
2013-07-01 16:49 ` Felipe Balbi
2013-07-01 16:49 ` Felipe Balbi
2013-07-01 21:01 ` Alan Stern
2013-07-01 21:01 ` Alan Stern
2013-07-01 21:01 ` Alan Stern
2013-07-02 8:22 ` Roger Quadros
2013-07-02 8:22 ` Roger Quadros
2013-07-02 8:22 ` Roger Quadros
2013-07-02 17:17 ` Alan Stern
2013-07-02 17:17 ` Alan Stern
2013-07-02 17:17 ` Alan Stern
2013-07-03 9:13 ` Roger Quadros
2013-07-03 9:13 ` Roger Quadros
2013-07-03 9:13 ` Roger Quadros
2013-07-03 12:57 ` Felipe Balbi
2013-07-03 12:57 ` Felipe Balbi
2013-07-03 12:57 ` Felipe Balbi
2013-07-03 13:06 ` Roger Quadros
2013-07-03 13:06 ` Roger Quadros
2013-07-03 13:06 ` Roger Quadros
2013-07-03 13:15 ` Felipe Balbi
2013-07-03 13:15 ` Felipe Balbi
2013-07-03 13:15 ` Felipe Balbi
2013-07-03 14:30 ` Alan Stern
2013-07-03 14:30 ` Alan Stern
2013-07-03 14:30 ` Alan Stern
2013-07-09 13:58 ` Roger Quadros
2013-07-09 13:58 ` Roger Quadros
2013-07-09 13:58 ` Roger Quadros
2013-06-19 14:05 ` [RFC PATCH 5/6] ARM: dts: omap3beagle-xm: Add idle state pins for USB host Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-19 18:42 ` Kevin Hilman
2013-06-19 18:42 ` Kevin Hilman
2013-06-20 11:55 ` Roger Quadros
2013-06-20 11:55 ` Roger Quadros
2013-06-20 11:55 ` Roger Quadros
2013-06-20 12:02 ` Roger Quadros
2013-06-20 12:02 ` Roger Quadros
2013-06-20 12:02 ` Roger Quadros
2013-06-20 13:02 ` Roger Quadros
2013-06-20 13:02 ` Roger Quadros
2013-06-20 13:02 ` Roger Quadros
2013-06-19 14:05 ` Roger Quadros [this message]
2013-06-19 14:05 ` [RFC PATCH 6/6] ARM: OMAP3: Enable Hardware Save and Restore for USB Host Roger Quadros
2013-06-19 14:05 ` Roger Quadros
2013-06-19 17:30 ` Sergei Shtylyov
2013-06-19 17:30 ` Sergei Shtylyov
2013-06-20 12:42 ` Roger Quadros
2013-06-20 12:42 ` Roger Quadros
2013-06-20 12:42 ` Roger Quadros
2013-06-19 15:23 ` [RFC PATCH 0/6] Suspend USB Host controller on bus suspend Alan Stern
2013-06-19 15:23 ` Alan Stern
2013-06-19 15:23 ` Alan Stern
2013-06-20 12:39 ` Roger Quadros
2013-06-20 12:39 ` Roger Quadros
2013-06-20 12:39 ` Roger Quadros
2013-06-20 17:19 ` Alan Stern
2013-06-20 17:19 ` Alan Stern
2013-06-20 17:19 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371650753-11452-7-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balbi@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=ruslan.bilovol@ti.com \
--cc=stern@rowland.harvard.edu \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.