All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org,
	Mark Brown <broonie@linaro.org>
Subject: [PATCH 1/3] ARM: dts: Put Arndale fixed voltage regulators on a simple-bus
Date: Mon,  1 Jul 2013 22:36:37 +0100	[thread overview]
Message-ID: <1372714599-17588-1-git-send-email-broonie@kernel.org> (raw)

From: Mark Brown <broonie@linaro.org>

Fixed voltage regulators (and other similar free standing things) are
supposed to go on a simple-bus for DT correctness reasons.

Signed-off-by: Mark Brown <broonie@linaro.org>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index abc7272..68a13a6 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -429,18 +429,24 @@
 		vdd-supply = <&ldo8_reg>;
 	};
 
-	mmc_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_33ON_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 1>;
-		enable-active-high;
-	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mmc_reg: voltage-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD_33ON_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 1>;
+			enable-active-high;
+		};
 
-	reg_hdmi_en: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "hdmi-en";
+		reg_hdmi_en: fixedregulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "hdmi-en";
+		};
 	};
 
 	fixed-rate-clocks {
-- 
1.8.3.1

WARNING: multiple messages have this Message-ID (diff)
From: broonie@kernel.org (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] ARM: dts: Put Arndale fixed voltage regulators on a simple-bus
Date: Mon,  1 Jul 2013 22:36:37 +0100	[thread overview]
Message-ID: <1372714599-17588-1-git-send-email-broonie@kernel.org> (raw)

From: Mark Brown <broonie@linaro.org>

Fixed voltage regulators (and other similar free standing things) are
supposed to go on a simple-bus for DT correctness reasons.

Signed-off-by: Mark Brown <broonie@linaro.org>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index abc7272..68a13a6 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -429,18 +429,24 @@
 		vdd-supply = <&ldo8_reg>;
 	};
 
-	mmc_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_33ON_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 1>;
-		enable-active-high;
-	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mmc_reg: voltage-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD_33ON_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 1>;
+			enable-active-high;
+		};
 
-	reg_hdmi_en: fixedregulator at 0 {
-		compatible = "regulator-fixed";
-		regulator-name = "hdmi-en";
+		reg_hdmi_en: fixedregulator at 0 {
+			compatible = "regulator-fixed";
+			regulator-name = "hdmi-en";
+		};
 	};
 
 	fixed-rate-clocks {
-- 
1.8.3.1

             reply	other threads:[~2013-07-01 21:36 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-01 21:36 Mark Brown [this message]
2013-07-01 21:36 ` [PATCH 1/3] ARM: dts: Put Arndale fixed voltage regulators on a simple-bus Mark Brown
2013-07-01 21:36 ` [PATCH 2/3] ARM: dts: Hook up supplies for Arndale S5M8767 Mark Brown
2013-07-01 21:36   ` Mark Brown
2013-07-01 21:36 ` [PATCH 3/3] ARM: dts: Add WM1811A audio CODEC to Arndale bindings Mark Brown
2013-07-01 21:36   ` Mark Brown
2013-07-01 21:47   ` Fabio Estevam
2013-07-01 21:47     ` Fabio Estevam
2013-07-01 22:38     ` Mark Brown
2013-07-01 22:38       ` Mark Brown
2013-07-02  5:21   ` Tushar Behera
2013-07-02  5:21     ` Tushar Behera
2013-07-02  9:25     ` Mark Brown
2013-07-02  9:25       ` Mark Brown
2013-07-24  1:50       ` Kukjin Kim
2013-07-24  1:50         ` Kukjin Kim
2013-07-05 23:36 ` [PATCH 1/3] ARM: dts: Put Arndale fixed voltage regulators on a simple-bus Tomasz Figa
2013-07-05 23:36   ` Tomasz Figa
2013-07-06  9:19   ` Mark Brown
2013-07-06  9:19     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1372714599-17588-1-git-send-email-broonie@kernel.org \
    --to=broonie@kernel.org \
    --cc=broonie@linaro.org \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.