All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 1/2] drm/i915: explicitly cast pipe -> cpu_transcoder
Date: Thu,  4 Jul 2013 12:01:15 +0200	[thread overview]
Message-ID: <1372932076-29065-1-git-send-email-daniel.vetter@ffwll.ch> (raw)

This makes sparse happy and also makes it a bit more obvious where we
pull off this trick - after all we're only allowed to do it eithe as a
default or on platforms where there is no disdinction between the pipe
and the cpu transcoder.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 8b48a72..745631f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4935,7 +4935,7 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t tmp;
 
-	pipe_config->cpu_transcoder = crtc->pipe;
+	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
 	pipe_config->shared_dpll = DPLL_ID_PRIVATE;
 
 	tmp = I915_READ(PIPECONF(crtc->pipe));
@@ -5806,7 +5806,7 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t tmp;
 
-	pipe_config->cpu_transcoder = crtc->pipe;
+	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
 	pipe_config->shared_dpll = DPLL_ID_PRIVATE;
 
 	tmp = I915_READ(PIPECONF(crtc->pipe));
@@ -5922,7 +5922,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 	enum intel_display_power_domain pfit_domain;
 	uint32_t tmp;
 
-	pipe_config->cpu_transcoder = crtc->pipe;
+	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
 	pipe_config->shared_dpll = DPLL_ID_PRIVATE;
 
 	tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
@@ -7020,7 +7020,7 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
 	 * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
 	 * to use a real value here instead.
 	 */
-	pipe_config.cpu_transcoder = intel_crtc->pipe;
+	pipe_config.cpu_transcoder = (enum transcoder) intel_crtc->pipe;
 	pipe_config.pixel_multiplier = 1;
 	i9xx_crtc_clock_get(intel_crtc, &pipe_config);
 
@@ -7850,7 +7850,8 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
 
 	drm_mode_copy(&pipe_config->adjusted_mode, mode);
 	drm_mode_copy(&pipe_config->requested_mode, mode);
-	pipe_config->cpu_transcoder = to_intel_crtc(crtc)->pipe;
+	pipe_config->cpu_transcoder =
+		(enum transcoder) to_intel_crtc(crtc)->pipe;
 	pipe_config->shared_dpll = DPLL_ID_PRIVATE;
 
 	/* Compute a starting value for pipe_config->pipe_bpp taking the source
-- 
1.7.11.7

             reply	other threads:[~2013-07-04 10:01 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-04 10:01 Daniel Vetter [this message]
2013-07-04 10:01 ` [PATCH 2/2] drm/i915: Explicitly cast pipe -> intel_dpll_id Daniel Vetter
2013-07-04 10:23 ` [PATCH 1/2] drm/i915: explicitly cast pipe -> cpu_transcoder Damien Lespiau
2013-07-04 12:41   ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1372932076-29065-1-git-send-email-daniel.vetter@ffwll.ch \
    --to=daniel.vetter@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.